The Steeda 555-3625 is a resonator delete mid-pipe built from 304 stainless steel for the 5.0L Coyote-powered S550 and S650 Mustang. It replaces the factory resonator section with a hybrid H/X layout, which Steeda also calls a Hex Pipe. A smooth transition and crossover are intended to combine the characteristics of an H-pipe and an X-pipe in one assembly. The tubing is 2.5 inch mandrel-bent, the overall length is 32 inches, and Steeda builds it in the USA to a patent-pending design.
The part is aimed at owners who want a more aggressive, race-inspired exhaust note and less weight without retuning the car. Steeda states that it removes up to 6 pounds and does not require a tune. It fits in the mid-pipe position, after the stock catalytic converters and before the stock mufflers, and works with virtually all aftermarket axle-back systems. Unlike many competing resonator deletes, it keeps the factory heat shields on 2018 and newer GT models with no cutting or modification of the shields. It suits GT, Bullitt, Mach 1, and Dark Horse owners building a lighter, louder exhaust in stages.
Key Features
- U.S.-sourced T-304 stainless steel tubing
- 2.5 inch diameter mandrel-bent tubing
- Hybrid H/X (Hex Pipe) design with a smooth transition and crossover section
- Patent-pending design
- Made in the USA
- 32 inch overall length
- Flush-fit band clamps allow the pipe to be cut shorter if needed
- Band clamps help prevent the exhaust leaks common with expanded-end kits
- Retains the factory exhaust heat shields on 2018 and newer GT models
- Band clamps allow the factory resonator to be reinstalled later
- Removes up to 6 lbs compared to the factory setup
- Aggressive, race-inspired exhaust tone
- No tune required
- Compatible with virtually all aftermarket axle-back exhaust kits
- Steeda part number 555-3625
U.S.-Sourced T-304 Stainless Steel Construction
Steeda builds this H/X-pipe from T-304 stainless steel tubing sourced in the United States and mandrel-bent to a consistent 2.5 inch diameter. According to the manufacturer, 304 stainless will not develop the surface rust typical of 409 stainless, and it will not corrode through the way aluminized mild steel pipes eventually can. For a component that sits low under the car and takes road spray, salt, and heat cycling, that material choice matters for long-term durability.
The pipe connects with flush-fit band clamps instead of expanded slip-fit ends. Steeda notes that this joint style helps prevent the exhaust leaks often seen with expanded-end kits. It also lets you trim the pipe shorter where needed for fitment. The design is patent pending, and the part is manufactured in the USA.
Performance and Benefits
The core of the design is the hybrid H/X crossover. A smooth transition between the two banks is meant to deliver the benefits of both an H-pipe and an X-pipe in one part. With the factory resonator gone, the Coyote V8 takes on a noticeably more aggressive, race-inspired tone.
Removing the resonator also takes weight out of the car, with Steeda citing a reduction of up to 6 pounds. The pipe requires no tune, so it can be installed without changing the engine calibration.
On 2018 and newer GT models, the pipe was engineered to work with the factory heat shields as they are. Many competing resonator deletes require you to cut and expand the pipe to clear the OE shields, or to chisel the shields off. This one avoids both. It is also compatible with virtually all aftermarket axle-back systems, so it pairs easily with an existing or planned rear exhaust upgrade.
Installation
- Mounts in the mid-pipe location, downstream of the stock catalytic converters and upstream of the stock mufflers
- Cutting the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market
- No tune is required after installation
- Band clamps allow the H/X-pipe to be cut to a shorter length if needed for fitment
- Factory heat shields on 2018 and newer GT models can stay in place without cutting or chiseling
- Band clamps allow the factory resonator to be reinstalled at a later date
Why You Need This
- Gives the Coyote V8 a more aggressive, race-inspired exhaust tone by eliminating the factory resonator
- Takes up to 6 pounds out of the exhaust system
- Requires no tune, so the engine calibration stays as it is
- T-304 stainless tubing resists the surface rust of 409 stainless and the rust-through of aluminized steel
- Keeps the factory heat shields on 2018 and newer GT models without cutting or removal
- Works with virtually all aftermarket axle-back kits for a staged exhaust build
- Band-clamp connections allow the factory resonator to be reinstalled later
Vehicle Fitment
- 2015-2026 Ford Mustang GT / Mach 1 / Dark Horse / Bullitt