{"product_id":"steeda-304-stainless-resonator-delete-h-pipe-2015-2020-shelby-gt350-555-3621","title":"Steeda 304 Stainless Resonator Delete H-Pipe (2015-2020 Shelby GT350) - 555-3621","description":"\u003cp\u003eThe Steeda 555-3621 is a resonator delete H-pipe built for the Shelby GT350 and its 5.2L flat-plane crank Voodoo V8. It takes the place of the section of factory exhaust that sits downstream of the catalytic converters and ahead of the axle-back, removing the stock resonators and substituting an H-style crossover made from T304 stainless steel. Steeda's goal with this part is to move the GT350's exhaust note away from the sharper character of the factory and aftermarket X-pipe layouts and toward a deeper, more traditional muscle car tone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states a gain of up to +6 hp and 4 lb-ft of torque. The manufacturer does not specify the test conditions for these figures.\u003c\/p\u003e\n\u003cp\u003eFor GT350 owners who want a different sound, somewhat better exhaust flow, and a little more low-end response, this H-pipe offers a simple clamp-on approach. Steeda states that it requires no tune and no welding, and because it is secured with clamps, the factory resonator can be reinstalled later if you decide to return the car to its original configuration. The stainless construction draws on design and manufacturing methods from Steeda's established GT X-pipe and H-pipe line.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete H-pipe designed for the 5.2L flat-plane crank Voodoo V8 in the Shelby GT350\u003c\/li\u003e\n\u003cli\u003eMade from T304 stainless steel\u003c\/li\u003e\n\u003cli\u003e30.75 in. overall length\u003c\/li\u003e\n\u003cli\u003eBand clamps let the pipe be cut down to a shorter length\u003c\/li\u003e\n\u003cli\u003eInstalls without welding, using a pair of flush-fit exhaust clamps\u003c\/li\u003e\n\u003cli\u003eNo tune required, according to Steeda\u003c\/li\u003e\n\u003cli\u003eRemoves the factory resonators to reduce exhaust restriction and weight\u003c\/li\u003e\n\u003cli\u003eReplaces the exhaust section between the catalytic converters and the axle-back\u003c\/li\u003e\n\u003cli\u003eIntended to improve low-end torque compared with the factory resonator\u003c\/li\u003e\n\u003cli\u003eAllows a return to the factory resonator using the supplied clamps\u003c\/li\u003e\n\u003cli\u003eIncorporates design and manufacturing elements from Steeda's GT X-pipe and H-pipe products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this H-pipe from T304 stainless steel, a material chosen for its resistance to rust and corrosion over the long term. Steeda positions it as a clear step up from exhaust components made of T409 stainless or aluminized steel, which can corrode and eventually develop holes as they age.\u003c\/p\u003e\u003cp\u003eOwners should expect that heat from the exhaust can cause the 304 stainless to discolor over time. This is a cosmetic change only and does not affect the pipe's resistance to rusting through. The part also benefits from construction and design approaches Steeda carried over from its GT-series X-pipes and H-pipes, with the intent that it will hold up for as long as you own the car.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is the main reason to choose this part. Steeda describes the H-pipe layout as giving the GT350 a lower, heavier rumble at idle and a more aggressive growl under acceleration. By comparison, the manufacturer characterizes both the stock and aftermarket X-pipe setups on this car as producing a thinner, raspier note. With the resonators removed, overall exhaust volume also goes up slightly.\u003c\/p\u003e\u003cp\u003eBeyond the sound, deleting the resonators lets exhaust gases leave the Voodoo engine with less restriction and takes some weight out of the system. H-pipe designs are generally associated with gains in low-end power and torque, whereas X-pipes tend to favor higher rpm performance. Steeda presents this H-pipe as a way to add some low-end response to the GT350 compared with the factory resonator.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNo welding is required; the H-pipe is held in position by two flush-fit exhaust clamps\u003c\/li\u003e\n\u003cli\u003eRemoving the factory resonator requires taking off the heat shield and cutting the exhaust\u003c\/li\u003e\n\u003cli\u003eThe band clamps allow the H-pipe to be trimmed to a shorter length if needed\u003c\/li\u003e\n\u003cli\u003eNo tune is required, according to Steeda\u003c\/li\u003e\n\u003cli\u003eThe included exhaust clamps can be used to put the factory resonator back on if you want to return to stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the GT350 to have a deeper, more traditional muscle car exhaust tone in place of the raspier X-pipe character\u003c\/li\u003e\n\u003cli\u003eYou want to add some low-end torque compared with the factory resonator\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists the rust and corrosion that can affect T409 or aluminized steel exhausts\u003c\/li\u003e\n\u003cli\u003eClamp-on installation without welding and with no tune required keeps the project simple\u003c\/li\u003e\n\u003cli\u003eThe modification can be reversed, since the factory resonator can be refitted using the included clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSteeda T304 stainless steel resonator delete H-pipe\u003c\/li\u003e\n\u003cli\u003eExhaust clamps (pair of flush-fit clamps)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68305202577593,"sku":"SDA-555-3621","price":304.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3621-v2-1__59737.1681300020_1.jpg?v=1794436072","url":"https:\/\/engmustangs.com\/products\/steeda-304-stainless-resonator-delete-h-pipe-2015-2020-shelby-gt350-555-3621","provider":"ENG Mustangs","version":"1.0","type":"link"}