{"product_id":"steeda-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-304-stainless-steel-construction-direct-fit","title":"Steeda 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with 304 Stainless Steel Construction (Direct-Fit)","description":"\u003cp\u003eThe Steeda Resonator Delete X-Pipe replaces the factory resonator section on 5.0L Coyote-powered S550 and S650 Mustangs. It is built from T-304 stainless steel using mandrel-bent 2.5-inch diameter tubing, and it mounts in the factory location between the stock catalytic converters and the stock mufflers. Removing the resonators and adding an X-style crossover changes the exhaust note to a more aggressive, race-inspired tone. Steeda also cites gains in output, flow, and weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states gains of up to +8 hp and up to +9.5 lb-ft of torque. The manufacturer notes that no tune is required. No further test conditions are specified.\u003c\/p\u003e\n\u003cp\u003eThis part suits GT, Bullitt, Mach 1, and Dark Horse owners who want a sharper sound and a measurable improvement without a tune. Steeda states it works with virtually all aftermarket axle-back systems, so it can pair with an existing or planned rear exhaust. On 2018 and newer GT models, it keeps the factory exhaust heat shields without modifying either the pipe or the shields. The band clamps also leave a path back to stock, because they allow the factory resonator to be reinstalled.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eT-304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.5-inch diameter tubing\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover with a smooth transition, which Steeda says creates more scavenging than traditional H-pipe designs\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated exhaust flow improvement of up to 20% over the factory resonator and H-pipe designs\u003c\/li\u003e\n\u003cli\u003eUp to +8 hp and up to +9.5 lb-ft of torque, per Steeda\u003c\/li\u003e\n\u003cli\u003eSheds up to 7 lb compared to the factory resonator section\u003c\/li\u003e\n\u003cli\u003e32-inch overall length\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the X-pipe to be shortened if needed\u003c\/li\u003e\n\u003cli\u003eClamp design helps prevent the exhaust leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eInstalls between the factory catalytic converters and factory mufflers\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this X-pipe from T-304 stainless steel tubing. According to the manufacturer, it will not develop the surface rust typical of 409 stainless steel. It also will not rust completely through the way aluminized mild steel pipes can. That matters for a component mounted low under the car, where it is exposed to moisture, road salt, and heat cycling.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent at a 2.5-inch diameter, so the pipe keeps a consistent cross-section through each bend. Instead of expanded slip-fit ends, the X-pipe uses flush-fit band clamps. Steeda says this approach prevents the exhaust leaks common with expanded-end kits. The same clamps also allow the pipe to be trimmed to a shorter length when needed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe X-shaped crossover merges the two exhaust banks through a smooth transition. Steeda states this produces a stronger scavenging effect than a traditional H-pipe, which supports added power at high RPM. The manufacturer rates the design at up to 20% better exhaust flow than the factory resonator and H-pipe layouts. It also lists gains of up to 8 hp and 9.5 lb-ft of torque with no tune required.\u003c\/p\u003e\u003cp\u003eDeleting the resonators gives the Coyote V8 a more aggressive, race-inspired exhaust tone. The swap also removes up to 7 lb from the exhaust system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts between the factory catalytic converters and the factory mufflers\u003c\/li\u003e\n\u003cli\u003eCutting of the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the X-pipe to be shortened to suit the installation\u003c\/li\u003e\n\u003cli\u003eOn 2018 and newer GT models, the factory heat shields can stay in place without modifying the X-pipe or the shields\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory resonators for a more aggressive exhaust tone on a Coyote-powered Mustang\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of up to 8 hp and 9.5 lb-ft without a tune\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel resists the surface rust seen on 409 stainless and the rust-through seen on aluminized steel\u003c\/li\u003e\n\u003cli\u003eRemoves up to 7 lb from the exhaust system\u003c\/li\u003e\n\u003cli\u003eKeeps the 2018 and newer factory heat shields without cutting or chiseling\u003c\/li\u003e\n\u003cli\u003eWorks with virtually all aftermarket axle-back systems, so it fits into a staged exhaust build\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Dark Horse \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304692150457,"sku":"SDA-555-3618","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3618_P04.jpg?v=1794436009","url":"https:\/\/engmustangs.com\/products\/steeda-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-304-stainless-steel-construction-direct-fit","provider":"ENG Mustangs","version":"1.0","type":"link"}