{"product_id":"steeda-2015-2026-ford-mustang-gt-resonator-delete-h-pipe-with-304-stainless-steel-construction-direct-fit","title":"Steeda 2015-2026 Ford Mustang GT Resonator Delete H-Pipe with 304 Stainless Steel Construction (Direct-Fit)","description":"\u003cp\u003eThe Steeda Resonator Delete H-Pipe is a 304 stainless steel mid-pipe that takes the place of the factory resonator assembly on S550 and S650 Mustangs powered by the 5.0L Coyote V8. It is built from 2.5 inch mandrel-bent tubing and uses an H-style crossover design. It fits in the exhaust system downstream of the stock catalytic converters and upstream of the OEM mufflers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states gains of up to +2 hp and up to +2 lb-ft of torque. The manufacturer does not list specific test conditions for these figures.\u003c\/p\u003e\n\u003cp\u003eRemoving the resonator gives the exhaust a deeper, traditional muscle car tone, and the H-pipe layout is designed to build low-RPM torque compared to the factory resonator. It also cuts up to 6.5 pounds from the car. The pipe is intended for GT, Mach 1, and Bullitt models. It keeps the factory heat shields used on 2018 and newer GTs, works with virtually all aftermarket axle-back systems, and does not need a tune. That makes it a practical, budget-minded way to change the character of a Coyote-powered Mustang.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.5 inch diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover design that replaces the factory resonator\u003c\/li\u003e\n\u003cli\u003e32 inch overall length\u003c\/li\u003e\n\u003cli\u003eUp to 6.5 lbs lighter than the factory setup\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of up to +2 hp and up to +2 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eImproves low-end torque compared to the factory resonator\u003c\/li\u003e\n\u003cli\u003eDeep, traditional muscle car exhaust note\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the pipe to be shortened if needed and help prevent leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eSupplied band clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003cli\u003eIntended for Mustang GT, Bullitt, and Mach 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this H-pipe from 304 stainless steel. 409 stainless often develops surface rust, and aluminized mild steel can corrode all the way through, while 304 resists both. That makes it a good choice for cars driven year-round or in wet climates.\u003c\/p\u003e\u003cp\u003eThe 2.5 inch tubing is mandrel bent, so the pipe keeps a consistent diameter through each bend. The pipe joins the exhaust with flush-fit band clamps rather than expanded slip-fit ends. Steeda notes that this approach avoids the exhaust leaks common with expanded-end kits and also lets the installer trim the pipe to a shorter length when needed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith the factory resonator removed and the H-style crossover in place, the exhaust develops a deeper, more traditional muscle car tone. Steeda states that the H design increases torque at lower RPM compared to the factory resonator. The manufacturer quotes up to +2 hp and up to +2 lb-ft of torque, and no tune is required.\u003c\/p\u003e\u003cp\u003eSwapping the resonator assembly for this pipe saves up to 6.5 pounds. Because it works with virtually all aftermarket axle-back kits, it can be added to an existing rear exhaust or used as one step in a staged exhaust build.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCutting of the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eThe H-pipe mounts downstream of the stock catalytic converters and ahead of the OEM mufflers\u003c\/li\u003e\n\u003cli\u003eFactory heat shields on 2018 and newer GT models can stay in place without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the pipe to be cut to a shorter length if needed\u003c\/li\u003e\n\u003cli\u003eThe supplied band clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper, traditional V8 exhaust tone from your Coyote-powered Mustang without replacing the entire system\u003c\/li\u003e\n\u003cli\u003eThe H-pipe layout targets low-RPM torque compared to the factory resonator\u003c\/li\u003e\n\u003cli\u003eIt removes up to 6.5 pounds from the car\u003c\/li\u003e\n\u003cli\u003e304 stainless steel resists the surface rust and rust-through seen with 409 stainless and aluminized steel\u003c\/li\u003e\n\u003cli\u003eOn 2018 and newer GTs, you can keep the factory heat shields without modifying them\u003c\/li\u003e\n\u003cli\u003eIt pairs with virtually all aftermarket axle-back kits\u003c\/li\u003e\n\u003cli\u003eNo tune is needed, and the supplied clamps let you return to the factory resonator if you choose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel resonator delete H-pipe\u003c\/li\u003e\n\u003cli\u003eBand clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304692084921,"sku":"SDA-555-3619","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3619_P04.jpg?v=1794436008","url":"https:\/\/engmustangs.com\/products\/steeda-2015-2026-ford-mustang-gt-resonator-delete-h-pipe-with-304-stainless-steel-construction-direct-fit","provider":"ENG Mustangs","version":"1.0","type":"link"}