Stainless Works

Stainless Works Redline Sound Cat-Back Exhaust w/ X-Pipe, Performance Connect, Quad Tips – 2026 Mustang GT | M24QUADXPCR

$2,845.25
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The Stainless Works Redline Sound cat-back (part number M24QUADXPCR) is the rear half of a complete header-back exhaust for the 2026 Mustang GT. It combines the brand's Redline mufflers, a 3-inch X-pipe crossover, and quad polished tips. It is engineered to bolt directly to Stainless Works' Performance Connect long tube headers and is not meant to run with stock manifolds or factory mid-pipes. Of all the muffler choices Stainless Works offers, the Redline is its loudest sound profile, so this system is aimed at owners who want an aggressive, race-oriented exhaust note.

For S650 owners already running Performance Connect long tubes, this cat-back finishes the system with TIG-welded 304L stainless steel tubing that weighs less than the factory mufflers and piping. The X-pipe adds scavenging and a raspier tone, and the quad tips fill the stock rear valence for a factory-style look. If your build is going header-back and you want maximum volume and an uncompromised layout, this assembly is designed around exactly that setup.

Key Features

  • Stainless Works Redline mufflers, the loudest sound option in the brand's lineup
  • 3-inch 304L stainless steel tubing, TIG-welded
  • X-pipe crossover for improved scavenging and a raspier tone
  • Quad polished tips that fit under and fill the OEM rear valence
  • Lighter than the factory mufflers and piping
  • Fixed, non-adjustable design built specifically for Performance Connect configurations
  • Bolts directly to Stainless Works Performance Connect long tube headers
  • Clamps and hardware included; factory hangers are reused
  • Part number M24QUADXPCR

TIG-Welded 304L Stainless Steel Construction

Stainless Works builds this cat-back from 3-inch 304L stainless steel, and every joint is TIG-welded. This construction is chosen for long-term durability and precise fitment.

The system has a fixed layout created specifically to work with the Performance Connect header design. Because the geometry is purpose-built rather than adjustable, the cat-back mates directly to the brand's long tubes. The quad tips sit in the factory rear valence openings for a clean, OEM-style appearance.

Performance and Benefits

The Redline mufflers replace the restrained factory units with Stainless Works' most aggressive design. They are tuned for maximum flow and a loud, sharp exhaust note. Paired with the X-pipe crossover, the result is a raspy, race-style tone. This system is a significant step up in volume, not a subtle upgrade.

Stainless Works states that the X-pipe improves scavenging and helps top-end horsepower. The manufacturer does not publish a specific gain figure. The complete assembly is also lighter than the stock mufflers and piping it replaces.

Stainless Works strongly recommends a tune to get the best performance from a full header-back system that includes this cat-back.

Installation

  • Bolts directly to Stainless Works Performance Connect long tube headers, which are required for installation
  • Will not fit cars with factory exhaust manifolds, stock mid-pipes, or other stock exhaust components
  • Not compatible with the factory active exhaust system; intended only for non-active exhaust cars
  • Clamps and hardware are supplied, and the original factory hangers are reused
  • Professional installation is recommended
  • Tuning is highly recommended for best results with the full system

Why You Need This

  • Completes a header-back system for 2026 Mustang GT owners already running Stainless Works Performance Connect long tubes
  • Delivers the loudest sound profile Stainless Works offers, through the Redline mufflers
  • The X-pipe crossover improves scavenging and produces a raspier tone
  • 3-inch TIG-welded 304L stainless steel provides durable, precise construction
  • Reduces weight compared with the factory mufflers and piping
  • Quad polished tips keep an OEM-style look within the factory rear valence

Vehicle Fitment

  • 2026 Ford Mustang GT

Fitment notes:

  • Not compatible with factory active exhaust systems
  • Not compatible with stock exhaust components
  • will not fit vehicles with factory manifolds or active exhaust

What's Included

  • Clamps
  • Hardware

Not included:

  • Stainless Works Performance Connect long tube headers (required, sold separately)
  • Hangers (the original factory hangers are reused)
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.