{"product_id":"stainless-works-redline-sound-cat-back-exhaust-w-x-pipe-factory-connect-quad-tips-2026-mustang-gt-m24quadxfcr","title":"Stainless Works Redline Sound Cat-Back Exhaust w\/ X-Pipe, Factory Connect, Quad Tips – 2026 Mustang GT | M24QUADXFCR","description":"\u003cp\u003eThe Stainless Works Redline Sound Cat-Back Exhaust, part number M24QUADXFCR, is a rear exhaust system for the 2026 Mustang GT built around Stainless Works' Redline mufflers, the company's loudest and most aggressive muffler offering. It pairs those mufflers with a 3 inch X-pipe crossover and four polished tips. The system is a Factory Connect design: it bolts to the stock mid-pipe and works with the factory rear valence, so you change the sound and appearance of the car without replacing the rest of the exhaust.\u003c\/p\u003e\n\u003cp\u003eThis system is aimed at S650 GT owners with non-active exhaust cars who still run the factory headers and mid-pipe and want a much louder, race-inspired tone. Stainless Works describes the sound as a sharp bark on cold start, crackles on deceleration, and a strong top-end note at wide-open throttle, while keeping cabin drone from becoming excessive. The 304L stainless construction, direct-fit layout, and lack of required tuning make it a practical choice for a car that is driven daily and also used for weekend fun.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRedline mufflers, the most aggressive sound profile Stainless Works offers\u003c\/li\u003e\n\u003cli\u003e3 inch mandrel-bent tubing made from 304L stainless steel\u003c\/li\u003e\n\u003cli\u003eTIG-welded construction; the manufacturer describes the material as aircraft-grade\u003c\/li\u003e\n\u003cli\u003e3 inch X-pipe crossover intended to improve exhaust scavenging and sharpen high-RPM tone\u003c\/li\u003e\n\u003cli\u003eFour polished tips with a factory-style fit that fills out the rear bumper\u003c\/li\u003e\n\u003cli\u003eFactory Connect design that attaches to the stock mid-pipe\u003c\/li\u003e\n\u003cli\u003eWorks with the factory rear valence for an OEM-style look\u003c\/li\u003e\n\u003cli\u003eFixed, direct-fit system that lines up with OEM mounting points\u003c\/li\u003e\n\u003cli\u003eLighter than the OEM components it replaces, with the amount varying by trim, per the manufacturer\u003c\/li\u003e\n\u003cli\u003ePart number M24QUADXFCR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304L Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works forms this cat-back from 304L stainless steel tubing in a 3 inch diameter. The tubing is mandrel-bent, which keeps the inside diameter consistent through each bend and avoids the restriction that crush bending can cause.\u003c\/p\u003e\u003cp\u003eJoints are TIG-welded for strength and durability. The manufacturer also calls the stainless aircraft-grade. Because the system is fixed and direct-fit, its mounting points are built to line up with the factory locations instead of depending on adjustable joints.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is the main reason to choose this system. The Redline mufflers are Stainless Works' most aggressive design, and the company says they produce a pronounced bark at cold start, crackling on decel, and an intense note at the top of the rev range under full throttle. The manufacturer also states the system avoids excessive drone inside the cabin.\u003c\/p\u003e\u003cp\u003eThe 3 inch X-pipe crossover is meant to improve scavenging and give the exhaust a sharper character at high RPM. Combined with the mandrel-bent 3 inch tubing, the design is intended to give exhaust gases an unrestricted path. Stainless Works also states the system weighs less than the factory components, although the savings depend on trim.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts directly to the factory mid-pipe\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eClamps and hardware are supplied with the system\u003c\/li\u003e\n\u003cli\u003eReuses the OEM exhaust hangers\u003c\/li\u003e\n\u003cli\u003eLines up with factory mounting points and works with the factory rear valence\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to get proper tip alignment and clearance\u003c\/li\u003e\n\u003cli\u003eFor non-active exhaust vehicles only; it does not work with factory active exhaust systems\u003c\/li\u003e\n\u003cli\u003eNot designed for use with Performance Connect headers or long-tube headers; Stainless Works offers Performance Connect versions for header-back builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the loudest and most aggressive tone in the Stainless Works muffler lineup\u003c\/li\u003e\n\u003cli\u003eYour GT still has its factory headers and mid-pipe, and you want a rear section that bolts on without cutting, welding, or tuning\u003c\/li\u003e\n\u003cli\u003e304L stainless tubing with TIG welds is built for long-term durability\u003c\/li\u003e\n\u003cli\u003eThe quad polished tips and factory valence fitment keep the rear of the car looking OEM-style\u003c\/li\u003e\n\u003cli\u003eYour car is a daily driver that also sees weekend or spirited use, and you want more sound without excessive cabin drone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with factory active exhaust systems\u003c\/li\u003e\n\u003cli\u003eNot compatible with active exhaust-equipped vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306330288313,"sku":"SSWM24QUADXFCR","price":2845.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/5522_source_1701890205_fa6b0050-8d1e-4a86-8e0c-2519ab5dd7de.jpg?v=1794436209","url":"https:\/\/engmustangs.com\/products\/stainless-works-redline-sound-cat-back-exhaust-w-x-pipe-factory-connect-quad-tips-2026-mustang-gt-m24quadxfcr","provider":"ENG Mustangs","version":"1.0","type":"link"}