Stainless Works

Stainless Works Redline Sound Cat-Back Exhaust w/ X-Pipe, Factory Connect, Quad Tips – 2026 Mustang GT | M24QUADXFCR

$2,845.25
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The Stainless Works Redline Sound Cat-Back Exhaust, part number M24QUADXFCR, is a rear exhaust system for the 2026 Mustang GT built around Stainless Works' Redline mufflers, the company's loudest and most aggressive muffler offering. It pairs those mufflers with a 3 inch X-pipe crossover and four polished tips. The system is a Factory Connect design: it bolts to the stock mid-pipe and works with the factory rear valence, so you change the sound and appearance of the car without replacing the rest of the exhaust.

This system is aimed at S650 GT owners with non-active exhaust cars who still run the factory headers and mid-pipe and want a much louder, race-inspired tone. Stainless Works describes the sound as a sharp bark on cold start, crackles on deceleration, and a strong top-end note at wide-open throttle, while keeping cabin drone from becoming excessive. The 304L stainless construction, direct-fit layout, and lack of required tuning make it a practical choice for a car that is driven daily and also used for weekend fun.

Key Features

  • Redline mufflers, the most aggressive sound profile Stainless Works offers
  • 3 inch mandrel-bent tubing made from 304L stainless steel
  • TIG-welded construction; the manufacturer describes the material as aircraft-grade
  • 3 inch X-pipe crossover intended to improve exhaust scavenging and sharpen high-RPM tone
  • Four polished tips with a factory-style fit that fills out the rear bumper
  • Factory Connect design that attaches to the stock mid-pipe
  • Works with the factory rear valence for an OEM-style look
  • Fixed, direct-fit system that lines up with OEM mounting points
  • Lighter than the OEM components it replaces, with the amount varying by trim, per the manufacturer
  • Part number M24QUADXFCR

Mandrel-Bent 304L Stainless Steel Construction

Stainless Works forms this cat-back from 304L stainless steel tubing in a 3 inch diameter. The tubing is mandrel-bent, which keeps the inside diameter consistent through each bend and avoids the restriction that crush bending can cause.

Joints are TIG-welded for strength and durability. The manufacturer also calls the stainless aircraft-grade. Because the system is fixed and direct-fit, its mounting points are built to line up with the factory locations instead of depending on adjustable joints.

Performance and Benefits

Sound is the main reason to choose this system. The Redline mufflers are Stainless Works' most aggressive design, and the company says they produce a pronounced bark at cold start, crackling on decel, and an intense note at the top of the rev range under full throttle. The manufacturer also states the system avoids excessive drone inside the cabin.

The 3 inch X-pipe crossover is meant to improve scavenging and give the exhaust a sharper character at high RPM. Combined with the mandrel-bent 3 inch tubing, the design is intended to give exhaust gases an unrestricted path. Stainless Works also states the system weighs less than the factory components, although the savings depend on trim.

Installation

  • Bolts directly to the factory mid-pipe
  • No cutting or welding required
  • No tuning required
  • Clamps and hardware are supplied with the system
  • Reuses the OEM exhaust hangers
  • Lines up with factory mounting points and works with the factory rear valence
  • Professional installation is recommended to get proper tip alignment and clearance
  • For non-active exhaust vehicles only; it does not work with factory active exhaust systems
  • Not designed for use with Performance Connect headers or long-tube headers; Stainless Works offers Performance Connect versions for header-back builds

Why You Need This

  • You want the loudest and most aggressive tone in the Stainless Works muffler lineup
  • Your GT still has its factory headers and mid-pipe, and you want a rear section that bolts on without cutting, welding, or tuning
  • 304L stainless tubing with TIG welds is built for long-term durability
  • The quad polished tips and factory valence fitment keep the rear of the car looking OEM-style
  • Your car is a daily driver that also sees weekend or spirited use, and you want more sound without excessive cabin drone

Vehicle Fitment

  • 2026 Ford Mustang GT

Fitment notes:

  • Not compatible with factory active exhaust systems
  • Not compatible with active exhaust-equipped vehicles

What's Included

  • Clamps
  • Mounting hardware
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.