Stainless Works

Stainless Works Redline Sound Cat-Back Exhaust w/ H-Pipe, Performance Connect, Quad Tips – 2026 Mustang GT | M24QUADHPCR

$2,845.25
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The Stainless Works Redline Sound Cat-Back with H-Pipe, part number M24QUADHPCR, is a complete rear exhaust system for the S650 Mustang GT. It pairs the company's Redline mufflers with a 3 inch H-pipe crossover and quad polished tips. The system is designed specifically for Stainless Works Performance Connect long tube headers, so it is intended for owners building a full header-back exhaust rather than adding a single bolt-on to an otherwise stock car.

Stainless Works describes Redline as its loudest muffler option, with a deep, unfiltered character. The H-pipe crossover adds a throatier, traditional muscle-car note instead of the raspier sound typically associated with X-pipe layouts. The tubing is 3 inch mandrel-bent 304L stainless steel joined with TIG welds, and the manufacturer states the system weighs less than the factory exhaust. For a 2026 Mustang GT already running or planning Performance Connect headers, this kit completes the exhaust with an aggressive tone and a factory-style rear tip layout.

Key Features

  • Stainless Works Redline mufflers, the manufacturer's loudest muffler option
  • 3 inch H-pipe crossover for a deeper, throatier exhaust note than an X-pipe arrangement
  • 3 inch mandrel-bent tubing in 304L stainless steel, described by the manufacturer as aircraft-grade
  • TIG-welded construction
  • Quad polished exhaust tips that fill the rear valence with a factory-style appearance
  • Built to mate with Stainless Works Performance Connect long tube headers
  • Fixed, non-adjustable design tailored to Performance Connect setups
  • Lighter than the stock exhaust system, per the manufacturer
  • Retains the OEM exhaust hangers
  • Clamps and all hardware included
  • Part number M24QUADHPCR

Mandrel-Bent 304L Stainless Steel Construction

Stainless Works builds this system from 3 inch 304L stainless steel tubing that is mandrel-bent, which keeps the tube diameter consistent through each bend. The manufacturer describes the material as aircraft-grade 304L.

All joints are TIG-welded. The layout is fixed rather than adjustable because it is engineered to connect directly to the company's Performance Connect long tube headers, and it hangs from the factory exhaust hangers.

Performance and Benefits

Sound is the defining trait of this kit. The Redline mufflers are the loudest choice in the Stainless Works lineup and produce a deep, raw tone. Routing the exhaust through a 3 inch H-pipe crossover shifts that sound toward a throatier, low-end rumble and away from the raspy edge of an X-pipe system, which suits owners who want a classic American V8 character.

Because the system is matched to Performance Connect headers, the manufacturer positions it as a front-to-back flow solution for full exhaust builds. Stainless Works also states that the system is lighter than the stock exhaust, although no specific weight figure is provided.

Installation

  • Designed to bolt directly to Stainless Works Performance Connect long tube headers, which are required
  • Will not work with stock exhaust manifolds, factory mid-pipes, or other factory exhaust components
  • Not compatible with vehicles equipped with factory active exhaust
  • Reuses the OEM exhaust hangers
  • Clamps and all mounting hardware are supplied
  • Professional installation is recommended to ensure correct tip alignment and clearance
  • Tuning is highly recommended when running a full header-back exhaust

Why You Need This

  • Completes a full header-back build for owners already running Stainless Works Performance Connect long tube headers
  • Delivers the most aggressive muffler tone Stainless Works offers, shaped by the H-pipe toward a deeper rumble rather than rasp
  • 3 inch mandrel-bent 304L stainless tubing with TIG welds for a durable, consistent build
  • Quad polished tips provide a clean, factory-style rear appearance
  • Lighter than the factory exhaust system
  • Arrives with clamps and hardware and uses the existing OEM hangers

Vehicle Fitment

  • 2026 Ford Mustang GT

Fitment notes:

  • Does not fit vehicles with factory active exhaust
  • Not compatible with stock manifolds or mid-pipes
  • Not compatible with active exhaust

What's Included

  • Clamps
  • All mounting hardware

Not included:

  • Stainless Works Performance Connect long tube headers (required, sold separately)
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.