The Stainless Works Redline Sound Cat-Back Exhaust with H-Pipe, part number M24CBHPCR, is the rear half of a complete header-back exhaust for the 2026 Mustang GT. It is the Performance Connect version, which means it is designed to bolt directly to Stainless Works Performance Connect long tube headers rather than to factory mid-pipes. The system combines straight-through Redline mufflers with an H-pipe crossover, 3-inch mandrel-bent 304L stainless tubing, and dual polished tips that work with the factory rear valence.
This system is meant for owners who have already installed, or plan to install, Stainless Works Performance Connect long tubes and want a matching cat-back to finish the job. The goal is a deep, traditional muscle car character: a full, throaty note when the engine is idling and a more forceful sound as you open the throttle, without the high-RPM rasp an X-pipe tends to add. Stainless Works lists the Redline muffler setup as its loudest option, so this one suits drivers who want maximum volume for street and track use.
Key Features
- Redline mufflers with a straight-through design, the loudest muffler configuration Stainless Works offers
- H-pipe crossover that produces a deeper, more traditional muscle car tone
- 3-inch 304L stainless steel tubing, mandrel-bent for consistent flow
- TIG-welded construction described by the manufacturer as aircraft-grade 304L stainless
- Dual polished tips that fit the factory rear valence
- Lighter than the factory cat-back and mufflers, according to the manufacturer
- Non-adjustable design built specifically to mate with Stainless Works Performance Connect headers
- Includes clamps and hardware
- Part number M24CBHPCR
Mandrel-Bent, TIG-Welded 304L Stainless Steel Construction
Stainless Works builds this cat-back from 3-inch 304L stainless steel tubing, which the manufacturer calls aircraft-grade. The tubing is mandrel-bent, so the inside diameter stays consistent through each bend. That keeps flow steady from the H-pipe back to the tips.
All joints are TIG-welded, and the manufacturer presents the system as a high-strength exhaust for regular street driving as well as track use. The layout is fixed rather than adjustable because it is engineered to line up with Stainless Works Performance Connect long tube headers.
Performance and Benefits
Sound is the main focus of this system. The straight-through Redline mufflers are the loudest choice in the Stainless Works range. The H-pipe crossover blends exhaust pulses for a lower-frequency tone that stays aggressive throughout the rev range. Compared with an X-pipe arrangement, the H-pipe gives up some high-RPM rasp for a heavier, old-school muscle car sound.
The 3-inch mandrel-bent tubing and straight-through mufflers make this a high-flow design. Stainless Works also says the system weighs less than the factory cat-back and mufflers, but it does not give a specific weight figure.
Installation
- Bolts directly to Stainless Works Performance Connect long tube headers
- Requires Stainless Works Performance Connect long tube headers; it does not fit factory exhaust components or mid-pipes
- Not compatible with factory active exhaust systems
- A tune is strongly recommended when installing with headers
- Professional installation is recommended to get proper alignment and clearance
- Clamps and hardware are included
- If you are not installing a header-back setup, Stainless Works offers a Factory Connect version of this system
Why You Need This
- It completes a header-back build for owners already running Stainless Works Performance Connect long tubes, with direct bolt-up to those headers
- The Redline mufflers give you the most volume available from a Stainless Works system
- The H-pipe produces a deep, traditional muscle car tone instead of the higher-pitched character of an X-pipe
- Mandrel-bent, TIG-welded 304L stainless tubing provides strength and consistent flow for street and track use
- It replaces the factory cat-back and mufflers with a lighter assembly
- The dual polished tips fit the factory rear valence, so no bodywork changes are needed to fit the tips
Vehicle Fitment
Fitment notes:
- Not compatible with factory active exhaust systems
- Does not fit factory exhaust or mid-pipes
- Not compatible with factory exhaust components
- Not for use with stock headers or mid-pipes
- Will not fit models with active exhaust
What's Included