{"product_id":"stainless-works-redline-factory-connect-axleback-3-polished-tips-2018-2023-mustang-gt-m18abr","title":"Stainless Works Redline Factory Connect Axleback - 3\" Polished Tips (2018-2023 Mustang GT) - M18ABR","description":"\u003cp\u003eThe Stainless Works Redline Factory Connect Axleback, part number M18ABR, is a quad-tip axle-back exhaust for the 2018-2023 Ford Mustang GT with the 5.0L V8. It bolts to the factory exhaust behind the rear suspension and replaces the stock rear section with Stainless Works' Redline sound profile and polished, double-wall, slash-cut conical tips.\u003c\/p\u003e\n\u003cp\u003eStainless Works builds the Redline series for owners who want as much sound as possible from the Coyote engine. The tuning raises the volume and sharpens the tone while still aiming to keep drone out of the cabin. The system is made from 304 stainless steel, fully TIG welded in Stainless Works' Streetsboro, Ohio facility, and covered by a lifetime warranty on materials and craftsmanship. It is designed for standard non-valved GT models and is not confirmed to fit convertibles.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRedline sound profile, Stainless Works' most aggressive series, tuned to maximize volume and tone\u003c\/li\u003e\n\u003cli\u003eEngineered to eliminate in-cabin drone\u003c\/li\u003e\n\u003cli\u003eFactory-connect design that joins the stock exhaust behind the rear suspension\u003c\/li\u003e\n\u003cli\u003eQuad-tip layout\u003c\/li\u003e\n\u003cli\u003ePolished, double-wall, slash-cut conical tips\u003c\/li\u003e\n\u003cli\u003eConstructed from corrosion-resistant 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eFully TIG welded for strength and appearance\u003c\/li\u003e\n\u003cli\u003eSmooth mandrel bends to optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eBuilt in Streetsboro, Ohio\u003c\/li\u003e\n\u003cli\u003eDesigned for standard non-valved vehicles\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on materials and craftsmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTIG-Welded 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works makes this axle-back from 304 stainless steel, chosen for its corrosion resistance. The system is fully TIG welded at the company's Streetsboro, Ohio facility, which gives the joints both strength and a clean finished look.\u003c\/p\u003e\u003cp\u003eThe tubing uses smooth mandrel bends that hold a consistent cross-section through each turn to optimize exhaust flow. The exhaust exits through four polished tips with double-wall, slash-cut conical construction.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Redline series is Stainless Works' most aggressive sound option. It is built to bring out as much of the 5.0L engine's volume and tone as possible. Even with that focus on sound, the system is engineered to keep drone out of the cabin, so the car stays comfortable on longer drives.\u003c\/p\u003e\u003cp\u003eMandrel-bent tubing gives exhaust gases a smooth path from the factory connection point to the tips. Stainless Works does not publish horsepower or torque figures for this system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnects to the factory exhaust behind the rear suspension; Stainless Works describes the installation as smooth\u003c\/li\u003e\n\u003cli\u003eDesigned for standard non-valved vehicles; it is not intended for cars with the factory active valve exhaust\u003c\/li\u003e\n\u003cli\u003eNot confirmed to fit convertible models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the most aggressive sound Stainless Works offers for the 5.0L without dealing with cabin drone\u003c\/li\u003e\n\u003cli\u003eYou want an axle-back that mates to the factory exhaust behind the rear suspension instead of a full system replacement\u003c\/li\u003e\n\u003cli\u003eYou want corrosion-resistant 304 stainless steel with full TIG welding\u003c\/li\u003e\n\u003cli\u003eYou want a polished quad-tip appearance with double-wall, slash-cut conical tips\u003c\/li\u003e\n\u003cli\u003eYou want the backing of a lifetime warranty on materials and craftsmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty on materials and craftsmanship from Stainless Works.\u003c\/p\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306327765177,"sku":"SSWM18ABR","price":1420.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/m18abr-1-primary.jpg?v=1794436207","url":"https:\/\/engmustangs.com\/products\/stainless-works-redline-factory-connect-axleback-3-polished-tips-2018-2023-mustang-gt-m18abr","provider":"ENG Mustangs","version":"1.0","type":"link"}