{"product_id":"stainless-works-legend-sound-cat-back-exhaust-w-x-pipe-performance-connect-dual-tips-2026-mustang-gt-m24cbxpcl","title":"Stainless Works Legend Sound Cat-Back Exhaust w\/ X-Pipe, Performance Connect, Dual Tips – 2026 Mustang GT | M24CBXPCL","description":"\u003cp\u003eThis Legend Sound cat-back from Stainless Works is built for 2026 Mustang GT owners who are running, or planning to install, Stainless Works Performance Connect long tube headers. It uses an X-pipe crossover and Performance Connect geometry designed to bolt directly to those headers, so the result is a complete header-back exhaust built from 3-inch mandrel-bent 304L stainless tubing and finished with polished dual tips. Part number M24CBXPCL.\u003c\/p\u003e\n\u003cp\u003eStainless Works positions this system as a replacement for a factory cat-back it describes as too quiet and too restrictive for the Gen-4 Coyote. Compared with stock, the manufacturer says the system flows significantly better and produces a far more aggressive tone, with the X-pipe smoothing exhaust pulses and the Legend mufflers intended to keep drone under control. It suits non-active-exhaust GT owners committed to a full long tube build who want a loud, enthusiast-oriented sound rather than a quiet daily driver.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLegend Series mufflers tuned for an aggressive tone with clean sound at high RPM while limiting drone\u003c\/li\u003e\n\u003cli\u003e3-inch mandrel-bent 304L stainless steel tubing\u003c\/li\u003e\n\u003cli\u003eTIG-welded 304L stainless construction, described by the manufacturer as aircraft-grade\u003c\/li\u003e\n\u003cli\u003ePerformance Connect X-pipe designed to match Stainless Works long tube headers\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover that smooths exhaust pulses for a crisp high-RPM note\u003c\/li\u003e\n\u003cli\u003ePolished dual tips with a factory-style look\u003c\/li\u003e\n\u003cli\u003eLighter than the stock system, with exact savings varying\u003c\/li\u003e\n\u003cli\u003eNon-adjustable Performance Connect design that requires Stainless Works long tube headers\u003c\/li\u003e\n\u003cli\u003eManufacturer part number M24CBXPCL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304L Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe system is fabricated from 304L stainless steel tubing in a 3-inch diameter, mandrel-bent to maintain consistent tube size through each bend for flow. Stainless Works specifies the material for flow, durability, and heat resistance, and joins the components with TIG welds.\u003c\/p\u003e\u003cp\u003eThe X-pipe section uses Stainless Works Performance Connect geometry, engineered to mate with the company's own long tube headers for a matched header-back assembly. Because the connection is purpose-built for those headers, the system is not adjustable to accept factory or aftermarket factory-connect mid-pipes.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eStainless Works states this system flows significantly better than the factory cat-back. Paired with long tube headers, it is intended to form a complete high-flow exhaust path from the headers back to the tips.\u003c\/p\u003e\u003cp\u003eThe sound is described as far more aggressive than stock. The X-pipe crossover evens out exhaust pulses for a sharper character at high RPM, while the Legend mufflers are meant to keep drone in check without dulling the exhaust note. The manufacturer is clear that this is a loud system intended for enthusiasts rather than owners who want a quiet commuter.\u003c\/p\u003e\u003cp\u003eThe system is lighter than the stock exhaust, though Stainless Works notes that the exact weight savings vary.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts directly to Stainless Works Performance Connect long tube headers\u003c\/li\u003e\n\u003cli\u003eMust be paired with Stainless Works Performance Connect headers; it will not fit stock exhaust systems, stock mid-pipes, or stock cats\u003c\/li\u003e\n\u003cli\u003eNot compatible with OEM or aftermarket factory-connect mid-pipes; owners without Stainless Works headers should consider the Factory Connect version\u003c\/li\u003e\n\u003cli\u003eFor non-active exhaust cars only; it will not work with factory active exhaust models\u003c\/li\u003e\n\u003cli\u003eA tune is required when installing a full long tube, header-back system\u003c\/li\u003e\n\u003cli\u003eAll necessary clamps and hardware are included\u003c\/li\u003e\n\u003cli\u003eProfessional installation is strongly recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompletes a header-back exhaust when running Stainless Works Performance Connect long tube headers\u003c\/li\u003e\n\u003cli\u003eReplaces a factory cat-back the manufacturer considers too quiet and restrictive for the Gen-4 Coyote\u003c\/li\u003e\n\u003cli\u003e3-inch mandrel-bent 304L stainless tubing chosen for flow, durability, and heat resistance\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover and Legend mufflers deliver a more aggressive sound while working to control drone\u003c\/li\u003e\n\u003cli\u003eLighter than the stock system\u003c\/li\u003e\n\u003cli\u003eShips with the clamps and hardware needed to install it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with stock mid-pipes or cats\u003c\/li\u003e\n\u003cli\u003eNot compatible with factory active exhaust models\u003c\/li\u003e\n\u003cli\u003eNot compatible with OEM or aftermarket factory-connect mid-pipes\u003c\/li\u003e\n\u003cli\u003eDoes not fit stock exhaust systems or stock mid-pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLegend Sound cat-back exhaust with Performance Connect X-pipe\u003c\/li\u003e\n\u003cli\u003ePolished dual tips\u003c\/li\u003e\n\u003cli\u003eAll necessary clamps and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless Works Performance Connect long tube headers (required)\u003c\/li\u003e\n\u003cli\u003eEngine tune (required for a full long tube, header-back installation)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306283659449,"sku":"SSWM24CBXPCL","price":2750.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/5514_source_1700667241_1e8177ef-a354-4404-b5d2-4c7b4bc088fa.jpg?v=1794436190","url":"https:\/\/engmustangs.com\/products\/stainless-works-legend-sound-cat-back-exhaust-w-x-pipe-performance-connect-dual-tips-2026-mustang-gt-m24cbxpcl","provider":"ENG Mustangs","version":"1.0","type":"link"}