{"product_id":"stainless-works-legend-sound-cat-back-exhaust-w-h-pipe-performance-connect-quad-tips-2026-mustang-gt-m24quadhpcl","title":"Stainless Works Legend Sound Cat-Back Exhaust w\/ H-Pipe, Performance Connect, Quad Tips – 2026 Mustang GT | M24QUADHPCL","description":"\u003cp\u003eThe Stainless Works Legend Sound Cat-Back Exhaust (part number M24QUADHPCL) is a 3-inch system for the 2026 Mustang GT, intended for builds that already run Stainless Works Performance Connect long tube headers. It uses an H-pipe crossover, Legend mufflers, and four polished exhaust tips. The goal is a deeper, more traditional muscle-car tone than the factory exhaust provides. Stainless Works says the system stays smooth at cruising speeds and gets noticeably more aggressive under heavier throttle.\u003c\/p\u003e\n\u003cp\u003eThis is not a standalone upgrade for an otherwise stock car. It bolts directly to the Performance Connect long tube headers and completes a header-back exhaust build. It is not designed for factory manifolds, factory mid-pipes, or Factory Connect header versions. For S650 owners who have committed to long tubes and want a finished system, the tubing is mandrel-bent and TIG-welded 304L stainless steel, and the system weighs less than the stock mufflers and piping.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLegend mufflers tuned for a smooth low-end growl with consistent tone through the rev range\u003c\/li\u003e\n\u003cli\u003e3-inch 304L stainless steel tubing, described by the manufacturer as aircraft-grade\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing with TIG-welded construction\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover that balances back pressure and rounds out the exhaust note\u003c\/li\u003e\n\u003cli\u003eQuad polished tips that sit beneath the rear valence in a factory-like layout\u003c\/li\u003e\n\u003cli\u003eLighter than the stock mufflers and piping\u003c\/li\u003e\n\u003cli\u003eFixed-length configuration built only for Performance Connect setups\u003c\/li\u003e\n\u003cli\u003eBolts directly to Stainless Works Performance Connect long tube headers\u003c\/li\u003e\n\u003cli\u003eReuses the stock hangers; clamps and hardware are included\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: M24QUADHPCL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304L Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works builds this system from 3-inch 304L stainless steel, which the manufacturer calls aircraft-grade. The tubing is mandrel-bent, so the pipe keeps its full diameter through each bend instead of pinching down the way crush-bent tubing can. Stainless Works says this approach supports both strength and exhaust flow.\u003c\/p\u003e\u003cp\u003eAll joints are TIG-welded. The four exhaust tips carry a polished finish, giving the rear of the car a clean, finished look.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe sound comes from two parts working together. The H-pipe crossover balances the pressure between the two banks and produces a fuller, rounder note. The Legend mufflers keep overall volume in check while preserving that tone. Stainless Works describes the result as a throaty rumble that stays composed at cruise and turns aggressive when you open the throttle, loud where it matters without sounding raspy or excessive.\u003c\/p\u003e\u003cp\u003eAccording to the manufacturer, the system is lighter than the factory mufflers and piping it replaces. No specific weight figure is given.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts directly to Stainless Works Performance Connect long tube headers, which are required for installation\u003c\/li\u003e\n\u003cli\u003eWill not fit factory exhaust manifolds or factory mid-pipes\u003c\/li\u003e\n\u003cli\u003eNot interchangeable with Stainless Works Factory Connect headers\u003c\/li\u003e\n\u003cli\u003eFixed-length design with no length adjustment\u003c\/li\u003e\n\u003cli\u003eReuses the factory exhaust hangers; clamps and hardware are supplied\u003c\/li\u003e\n\u003cli\u003eTuning is highly recommended for full header-back exhaust setups\u003c\/li\u003e\n\u003cli\u003eStainless Works recommends professional installation to get proper alignment and clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompletes a header-back exhaust build on a 2026 Mustang GT already running Stainless Works Performance Connect long tube headers\u003c\/li\u003e\n\u003cli\u003eReplaces the quiet factory sound with a deeper, traditional muscle-car tone that stays manageable at cruise\u003c\/li\u003e\n\u003cli\u003eMandrel-bent, TIG-welded 304L stainless tubing provides durable construction in a full 3-inch diameter\u003c\/li\u003e\n\u003cli\u003eThe H-pipe and Legend muffler combination targets a rounded note rather than a raspy one\u003c\/li\u003e\n\u003cli\u003eWeighs less than the factory mufflers and piping it replaces\u003c\/li\u003e\n\u003cli\u003eFour polished tips under the rear valence keep the rear of the car looking close to factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with factory active exhaust systems\u003c\/li\u003e\n\u003cli\u003eWill not fit factory manifolds or mid-pipes\u003c\/li\u003e\n\u003cli\u003enot compatible with stock exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH-pipe crossover\u003c\/li\u003e\n\u003cli\u003eLegend mufflers\u003c\/li\u003e\n\u003cli\u003eQuad polished exhaust tips\u003c\/li\u003e\n\u003cli\u003eClamps and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless Works Performance Connect long tube headers (required for installation)\u003c\/li\u003e\n\u003cli\u003eExhaust hangers (the factory hangers are reused)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306326782137,"sku":"SSWM24QUADHPCL","price":2845.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/5524_source_1701890205_83bcf1df-c8e1-44ae-a6a3-184651a62d0f.jpg?v=1794436202","url":"https:\/\/engmustangs.com\/products\/stainless-works-legend-sound-cat-back-exhaust-w-h-pipe-performance-connect-quad-tips-2026-mustang-gt-m24quadhpcl","provider":"ENG Mustangs","version":"1.0","type":"link"}