{"product_id":"stainless-works-legend-sound-cat-back-exhaust-w-h-pipe-performance-connect-dual-tips-2026-mustang-gt-m24cbhpcl","title":"Stainless Works Legend Sound Cat-Back Exhaust w\/ H-Pipe, Performance Connect, Dual Tips – 2026 Mustang GT | M24CBHPCL","description":"\u003cp\u003eThe Stainless Works Legend Sound Cat-Back with Performance Connect H-Pipe (part number M24CBHPCL) is an exhaust system for the 2026 Mustang GT, intended for owners building a complete exhaust from the headers rearward. It pairs an H-pipe crossover with Legend Series mufflers and 3-inch mandrel-bent 304L stainless steel tubing, finishing in dual polished tips. The system bolts directly to Stainless Works Performance Connect long tube headers, so it is a fit for Coyote-powered GTs already running, or planning to run, that header design.\u003c\/p\u003e\n\u003cp\u003eThe purpose of this system is a traditional American V8 exhaust note rather than the sharper, higher-pitched character typically associated with an X-pipe. Stainless Works describes the tone as an aggressive idle, a throaty midrange, and a solid bark at higher RPM, with the Legend Series mufflers keeping drone minimal for street use. Combined with freer-flowing tubing than the factory system and TIG-welded stainless construction, it suits enthusiasts who want a loud, old-school sound from a long tube header build on a non-active-exhaust 2026 Mustang GT.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLegend Series mufflers tuned for a deep, muscle car tone with minimal drone\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover for a classic V8 burble without the high-pitched rasp of an X-pipe\u003c\/li\u003e\n\u003cli\u003ePerformance Connect design for direct bolt-up to Stainless Works long tube headers\u003c\/li\u003e\n\u003cli\u003e3-inch mandrel-bent tubing to reduce backpressure compared with the stock system\u003c\/li\u003e\n\u003cli\u003e304L stainless steel construction, TIG-welded and corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eDual polished tips designed to fit the factory rear valence\u003c\/li\u003e\n\u003cli\u003eLighter than the stock exhaust, according to the manufacturer (exact difference varies by trim)\u003c\/li\u003e\n\u003cli\u003eNon-adjustable configuration engineered specifically for Performance Connect header fitment\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary clamps and hardware\u003c\/li\u003e\n\u003cli\u003ePart number M24CBHPCL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3-Inch Mandrel-Bent 304L Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works builds this system from 304L stainless steel tubing in a 3-inch diameter. The tubing is mandrel-bent, which keeps the inside diameter consistent through each bend instead of crimping it, and that is a key part of how the system flows more freely than the factory exhaust.\u003c\/p\u003e\u003cp\u003eAll joints are TIG-welded, and the manufacturer specifies the material as corrosion-resistant aircraft-grade tubing chosen to hold up under high exhaust heat and hard use. The system is not adjustable; its geometry is designed around the Performance Connect long tube header layout so it lines up with that header's outlets.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe sound profile is the main reason to choose this system. The H-pipe crossover and Legend Series mufflers produce what Stainless Works describes as a raw American V8 tone: an aggressive idle, a throaty midrange, and a solid bark near the top of the rev range. Owners who prefer a deep burble over the snappier, raspier note of an X-pipe are the intended audience.\u003c\/p\u003e\u003cp\u003eThe manufacturer is clear that this is a loud system, best suited for drivers who want to hear and feel the car at every RPM, while the mufflers are designed to keep drone minimal enough for street driving. On the flow side, the 3-inch mandrel-bent tubing reduces backpressure relative to the stock system, and the manufacturer states the system is lighter than the factory exhaust, with the exact savings varying by trim.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts directly to Stainless Works Performance Connect long tube headers; those headers are required\u003c\/li\u003e\n\u003cli\u003eNot compatible with the factory mid-pipe, factory catalytic converters, or factory-style mid-pipes\u003c\/li\u003e\n\u003cli\u003eNot for vehicles equipped with the factory active exhaust; designed for non-active exhaust 2026 Mustang GT models\u003c\/li\u003e\n\u003cli\u003eIf you are not running Performance Connect headers, the Factory Connect version of this system is needed instead\u003c\/li\u003e\n\u003cli\u003eTuning is called for with long tube headers to maintain proper air-fuel ratio and performance\u003c\/li\u003e\n\u003cli\u003eAll necessary clamps and hardware are included\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to ensure proper alignment and clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou already run, or plan to install, Stainless Works Performance Connect long tube headers and want an exhaust designed to bolt directly to them\u003c\/li\u003e\n\u003cli\u003eYou prefer the deep, classic tone of an H-pipe over the higher-pitched character of an X-pipe\u003c\/li\u003e\n\u003cli\u003eYou want 3-inch mandrel-bent tubing that flows more freely than the stock system\u003c\/li\u003e\n\u003cli\u003eYou want TIG-welded 304L stainless construction built to withstand heat and corrosion\u003c\/li\u003e\n\u003cli\u003eYou want a loud exhaust note with mufflers designed to keep drone minimal for street driving\u003c\/li\u003e\n\u003cli\u003eYou want dual polished tips that fit the factory rear valence\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003enot compatible with the factory mid-pipe or cats\u003c\/li\u003e\n\u003cli\u003eNot compatible with factory active exhaust models\u003c\/li\u003e\n\u003cli\u003eNot compatible with stock exhaust system or factory-style mid-pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAll necessary clamps and hardware\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless Works Performance Connect long tube headers (required for installation)\u003c\/li\u003e\n\u003cli\u003eEngine tuning (called for when running long tube headers)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306327863481,"sku":"SSWM24CBHPCL","price":2750.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/5516_source_1700667241_ab507360-07bb-44e1-8648-d39307cd1b2b.jpg?v=1794436206","url":"https:\/\/engmustangs.com\/products\/stainless-works-legend-sound-cat-back-exhaust-w-h-pipe-performance-connect-dual-tips-2026-mustang-gt-m24cbhpcl","provider":"ENG Mustangs","version":"1.0","type":"link"}