Stainless Works

Stainless Works Legend Sound Cat-Back Exhaust w/ H-Pipe, Performance Connect, Dual Tips – 2026 Mustang GT | M24CBHPCL

$2,750.25
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The Stainless Works Legend Sound Cat-Back with Performance Connect H-Pipe (part number M24CBHPCL) is an exhaust system for the 2026 Mustang GT, intended for owners building a complete exhaust from the headers rearward. It pairs an H-pipe crossover with Legend Series mufflers and 3-inch mandrel-bent 304L stainless steel tubing, finishing in dual polished tips. The system bolts directly to Stainless Works Performance Connect long tube headers, so it is a fit for Coyote-powered GTs already running, or planning to run, that header design.

The purpose of this system is a traditional American V8 exhaust note rather than the sharper, higher-pitched character typically associated with an X-pipe. Stainless Works describes the tone as an aggressive idle, a throaty midrange, and a solid bark at higher RPM, with the Legend Series mufflers keeping drone minimal for street use. Combined with freer-flowing tubing than the factory system and TIG-welded stainless construction, it suits enthusiasts who want a loud, old-school sound from a long tube header build on a non-active-exhaust 2026 Mustang GT.

Key Features

  • Legend Series mufflers tuned for a deep, muscle car tone with minimal drone
  • H-pipe crossover for a classic V8 burble without the high-pitched rasp of an X-pipe
  • Performance Connect design for direct bolt-up to Stainless Works long tube headers
  • 3-inch mandrel-bent tubing to reduce backpressure compared with the stock system
  • 304L stainless steel construction, TIG-welded and corrosion-resistant
  • Dual polished tips designed to fit the factory rear valence
  • Lighter than the stock exhaust, according to the manufacturer (exact difference varies by trim)
  • Non-adjustable configuration engineered specifically for Performance Connect header fitment
  • Includes all necessary clamps and hardware
  • Part number M24CBHPCL

3-Inch Mandrel-Bent 304L Stainless Steel Construction

Stainless Works builds this system from 304L stainless steel tubing in a 3-inch diameter. The tubing is mandrel-bent, which keeps the inside diameter consistent through each bend instead of crimping it, and that is a key part of how the system flows more freely than the factory exhaust.

All joints are TIG-welded, and the manufacturer specifies the material as corrosion-resistant aircraft-grade tubing chosen to hold up under high exhaust heat and hard use. The system is not adjustable; its geometry is designed around the Performance Connect long tube header layout so it lines up with that header's outlets.

Performance and Benefits

The sound profile is the main reason to choose this system. The H-pipe crossover and Legend Series mufflers produce what Stainless Works describes as a raw American V8 tone: an aggressive idle, a throaty midrange, and a solid bark near the top of the rev range. Owners who prefer a deep burble over the snappier, raspier note of an X-pipe are the intended audience.

The manufacturer is clear that this is a loud system, best suited for drivers who want to hear and feel the car at every RPM, while the mufflers are designed to keep drone minimal enough for street driving. On the flow side, the 3-inch mandrel-bent tubing reduces backpressure relative to the stock system, and the manufacturer states the system is lighter than the factory exhaust, with the exact savings varying by trim.

Installation

  • Bolts directly to Stainless Works Performance Connect long tube headers; those headers are required
  • Not compatible with the factory mid-pipe, factory catalytic converters, or factory-style mid-pipes
  • Not for vehicles equipped with the factory active exhaust; designed for non-active exhaust 2026 Mustang GT models
  • If you are not running Performance Connect headers, the Factory Connect version of this system is needed instead
  • Tuning is called for with long tube headers to maintain proper air-fuel ratio and performance
  • All necessary clamps and hardware are included
  • Professional installation is recommended to ensure proper alignment and clearance

Why You Need This

  • You already run, or plan to install, Stainless Works Performance Connect long tube headers and want an exhaust designed to bolt directly to them
  • You prefer the deep, classic tone of an H-pipe over the higher-pitched character of an X-pipe
  • You want 3-inch mandrel-bent tubing that flows more freely than the stock system
  • You want TIG-welded 304L stainless construction built to withstand heat and corrosion
  • You want a loud exhaust note with mufflers designed to keep drone minimal for street driving
  • You want dual polished tips that fit the factory rear valence

Vehicle Fitment

  • 2026 Ford Mustang GT
  • 2026 Ford Mustang GT

Fitment notes:

  • not compatible with the factory mid-pipe or cats
  • Not compatible with factory active exhaust models
  • Not compatible with stock exhaust system or factory-style mid-pipes

What's Included

  • All necessary clamps and hardware

Not included:

  • Stainless Works Performance Connect long tube headers (required for installation)
  • Engine tuning (called for when running long tube headers)
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.