Stainless Works

Stainless Works GT350CBXPCL Legend Catback X-Pipe Exhaust Performance Connect with Active Valves (Ford GT350 & GT350R 2015-20)

$2,845.25
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The Stainless Works Legend cat-back exhaust, part number GT350CBXPCL, is a 3-inch X-pipe system with active valves built for the Shelby GT350 and GT350R. Its mufflers are tuned for this engine to give a more aggressive tone and more volume than stock, and Stainless Works describes them as drone free. The in-house engineered active valves connect directly to the factory electronics, so the selectable exhaust modes keep working after installation.

Stainless Works designed the Legend series with daily drivers in mind. The goal is the brand's signature growl with restrained loudness and a comfortable cabin, rather than maximum volume. The system is TIG welded from corrosion resistant 304 stainless steel at the company's Streetsboro, Ohio facility. It reuses the factory tips and exits at the stock location through the rear valance, so the car keeps its OEM appearance. For GT350 owners who want better sound and flow while keeping full exhaust mode control, it is a well-rounded upgrade.

Key Features

  • Cat-back exhaust with an X-pipe crossover, part number GT350CBXPCL
  • 3-inch tubing running into the X-pipe crossover for improved flow over the stock exhaust
  • Mufflers tuned specifically for this engine and described by the manufacturer as drone free
  • In-house engineered active valves that bolt directly to the factory electronics
  • Supports all factory exhaust modes: Quiet (closed valve), Normal (chambered), and Track (wide open, straight through)
  • Legend series tuning with a signature growl, increased volume over stock, and a comfortable cabin
  • Designed to attach at the performance connection point
  • Reuses the OEM exhaust tips
  • Exits at the factory location through the rear valance
  • Built from corrosion resistant 304 stainless steel
  • TIG welded at the Stainless Works facility in Streetsboro, Ohio
  • Lifetime warranty on material and craftsmanship

TIG-Welded 304 Stainless Steel Construction

Stainless Works builds the Legend system from 304 stainless steel, which it specifies for corrosion resistance. Every joint is TIG welded at the company's own facility in Streetsboro, Ohio.

The active valve hardware is engineered in-house rather than sourced from another supplier. Each valve is designed to bolt directly to the factory electronics. Stainless Works backs the system with a lifetime warranty covering material and craftsmanship.

Performance and Benefits

The system uses 3-inch tubing feeding an X-pipe crossover, which Stainless Works says improves flow compared with the stock exhaust. The mufflers are tuned specifically for this engine and are intended to be drone free.

The active valves keep all three factory exhaust modes. Quiet closes the valves, Normal routes exhaust through the chambered path, and Track opens the system fully for a straight-through path. You can choose a subdued sound for the commute and the most open setting for track days.

Legend is the more restrained series in the Stainless Works lineup. It is tuned for the brand's signature growl and more volume than stock while keeping cabin noise comfortable, which suits a car that sees regular street use.

Installation

  • The active valves bolt directly to the factory electronics, so all exhaust modes keep working
  • The system reuses your factory OEM exhaust tips
  • Designed to connect at the performance connection point
  • Exits at the factory location through the rear valance

Why You Need This

  • You want more volume and a more aggressive tone than stock without drone or an overly loud cabin on daily drives
  • You want to keep the factory Quiet, Normal, and Track modes after upgrading the exhaust
  • The 3-inch tubing and X-pipe crossover improve flow over the factory system
  • The 304 stainless construction resists corrosion
  • Reusing the OEM tips and the factory valance exit keeps the stock rear-end appearance
  • The lifetime warranty on material and craftsmanship covers long-term ownership

Vehicle Fitment

  • 2015-2026 Ford Mustang GT350R / GT350
  • 2015-2020 Ford Mustang GT350R

Warranty

Lifetime warranty on material and craftsmanship from Stainless Works.

Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.