{"product_id":"stainless-works-3-retro-chambered-cat-back-exhaust-w-x-pipe-performance-connect-2015-2017-and-2026-mustang-gt-non-active","title":"Stainless Works 3\" Retro Chambered Cat-Back Exhaust w\/ X-Pipe, Performance Connect – 2015–2017 \u0026 2026 Mustang GT (Non-Active)","description":"\u003cp\u003eThe Stainless Works 3\" Retro Chambered Cat-Back with X-Pipe, Performance Connect version, is a complete rear exhaust section for non-active Mustang GT models that already run Stainless Works long tube headers and the matching Performance Connect mid-pipe. It is fabricated from 304L stainless steel that is mandrel bent and TIG welded. The system pairs 3\" tubing with retro chambered mufflers and an X-pipe crossover, and it bolts directly to the Stainless Works header and mid-pipe combination. It is intended to finish a long tube build rather than act as a standalone upgrade for a stock exhaust.\u003c\/p\u003e\n\u003cp\u003eThe design brief is a deep, traditional muscle-car exhaust note from the chambered mufflers, without high-pitched rasp, while the X-pipe balances exhaust pulses between banks. Stainless Works describes this as an aggressive system for serious builds, not a mild one. Owners who have already committed to Stainless Works long tubes on a 2015 to 2017 or 2026 Mustang GT, and who do not want a stock-style cat-back limiting that setup, are the intended buyers. Anyone still running factory manifolds or a different mid-pipe should look at the Stainless Works Factory Connect version instead.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePerformance Connect design that bolts directly to Stainless Works long tube headers and the matching Stainless Works mid-pipe\u003c\/li\u003e\n\u003cli\u003e3\" tubing with a straight-through design, per the manufacturer\u003c\/li\u003e\n\u003cli\u003eRetro chambered mufflers tuned for a classic muscle-car tone without high-pitched rasp or drone, according to Stainless Works\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover to balance exhaust pulses and improve scavenging\u003c\/li\u003e\n\u003cli\u003e304L stainless steel, mandrel bent and TIG welded, for corrosion resistance and high-heat durability\u003c\/li\u003e\n\u003cli\u003eFixed fitment engineered specifically around the Stainless Works long tube and mid-pipe combination\u003c\/li\u003e\n\u003cli\u003eDescribed by the manufacturer as lighter than the stock cat-back, depending on trim\u003c\/li\u003e\n\u003cli\u003eClamps and hardware included; factory hangers are reused\u003c\/li\u003e\n\u003cli\u003eNo tuning required for this section of the exhaust\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: M15CB3X-LMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304L Mandrel-Bent, TIG-Welded Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works builds this cat-back from 304L stainless steel. The low-carbon 304L grade was chosen for its corrosion resistance and its ability to handle high exhaust temperatures, which matters on a car running long tube headers.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which keeps the 3\" diameter consistent through each bend, and the joints are TIG welded. Fitment is fixed rather than adjustable. The system is engineered to line up specifically with Stainless Works Performance Connect long tubes and the matching mid-pipe, so the complete exhaust works as one integrated package.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe retro chambered mufflers deliver a deep, old-school muscle-car exhaust note. Stainless Works says they avoid the high-pitched rasp some systems produce, and it describes the tone as free of drone. The manufacturer is equally clear that this is not a mild system. It is aimed at owners who want an assertive sound to match a long tube build.\u003c\/p\u003e\u003cp\u003eUpstream of the mufflers, the X-pipe crossover merges and balances the exhaust pulses from each cylinder bank. Stainless Works credits this with smoother revving and improved exhaust scavenging. Combined with the straight-through 3\" layout, the system is designed so the rear section does not restrict the flow gained from long tube headers and a performance mid-pipe.\u003c\/p\u003e\u003cp\u003eStainless Works also states that the system is lighter than the factory cat-back, with the amount of savings depending on trim.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires Stainless Works long tube headers and the matching Stainless Works Performance Connect mid-pipe\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on to the Stainless Works long tubes and mid-pipe; will not connect to factory exhaust manifolds, OEM mid-pipes, or other aftermarket mid-pipes\u003c\/li\u003e\n\u003cli\u003eFits non-active exhaust vehicles only\u003c\/li\u003e\n\u003cli\u003eClamps and hardware are included\u003c\/li\u003e\n\u003cli\u003eFactory exhaust hangers are reused\u003c\/li\u003e\n\u003cli\u003eNo tuning is required for this section of the exhaust\u003c\/li\u003e\n\u003cli\u003eProfessional installation is strongly recommended to achieve full alignment and integration with the header and mid-pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou already run Stainless Works long tube headers and the Performance Connect mid-pipe and want a cat-back engineered to bolt directly to them\u003c\/li\u003e\n\u003cli\u003eYou want a deep, traditional chambered-muffler exhaust note rather than a high-pitched or raspy tone\u003c\/li\u003e\n\u003cli\u003eThe X-pipe crossover balances exhaust pulses, which Stainless Works credits with smoother revving and better scavenging\u003c\/li\u003e\n\u003cli\u003e304L stainless, mandrel-bent and TIG-welded construction is built to resist corrosion and handle high heat over the long term\u003c\/li\u003e\n\u003cli\u003e3\" straight-through tubing avoids bottlenecking a full long tube exhaust with a stock-style rear section\u003c\/li\u003e\n\u003cli\u003eNo tuning is required for this section, and clamps and hardware are supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with factory manifolds or active exhaust\u003c\/li\u003e\n\u003cli\u003eNot compatible with OEM or other aftermarket mid-pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless Works long tube headers (required)\u003c\/li\u003e\n\u003cli\u003eMatching Stainless Works Performance Connect mid-pipe (required)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68304937451705,"sku":"SSWM15CB3X-LMF","price":2085.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M15CB3X-LMF_1.jpg?v=1794436044","url":"https:\/\/engmustangs.com\/products\/stainless-works-3-retro-chambered-cat-back-exhaust-w-x-pipe-performance-connect-2015-2017-and-2026-mustang-gt-non-active","provider":"ENG Mustangs","version":"1.0","type":"link"}