{"product_id":"stainless-works-3-retro-chambered-cat-back-exhaust-system-w-h-pipe-performance-connect-2015-2017-mustang-gt-2026-mustang-gt-non-active-m15cb3-lmf","title":"Stainless Works 3\" Retro Chambered Cat-Back Exhaust System w\/ H-Pipe (Performance Connect) – 2015–2017 Mustang GT \/ 2026 Mustang GT Non-Active | M15CB3-LMF","description":"\u003cp\u003eThe Stainless Works M15CB3-LMF is a 3 inch Retro Chambered cat-back exhaust that includes a performance H-pipe. It is built from mandrel-bent, TIG-welded 304L stainless steel and is designed for non-active-exhaust Mustang GT models from both the S550 and S650 generations. Factory exhaust on these cars is crimped, restrictive, and quiet for a V8 that revs beyond 7,000 rpm. This system replaces those parts with larger, smoother tubing and chambered mufflers that bring a traditional muscle car character to the exhaust note.\u003c\/p\u003e\n\u003cp\u003eThis is a Performance Connect system. It is engineered to bolt directly to Stainless Works Performance Connect long tube headers, so it does not mate to stock headers or the factory mid-pipe. It suits owners who are building, or planning to build, a complete Stainless Works header-back exhaust and want a matched stainless system with a pronounced, old-school sound. Owners who are not planning a full exhaust build would be better served by a Factory Connect system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 inch mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003e304L stainless steel construction, described by the manufacturer as aircraft-grade\u003c\/li\u003e\n\u003cli\u003eTIG-welded assembly\u003c\/li\u003e\n\u003cli\u003eRetro Chambered mufflers for a hard-edged muscle car sound with drone kept to a minimum\u003c\/li\u003e\n\u003cli\u003ePerformance H-pipe intended to improve low-end torque and throttle response while balancing flow between banks\u003c\/li\u003e\n\u003cli\u003ePerformance Connect design that mates directly to Stainless Works Performance Connect long tube headers\u003c\/li\u003e\n\u003cli\u003eSlight weight reduction compared to stock, varying by trim and model year\u003c\/li\u003e\n\u003cli\u003eFor non-active exhaust Mustang GT models only\u003c\/li\u003e\n\u003cli\u003eManufacturer part number M15CB3-LMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304L Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works builds this system from 304L stainless steel, which the manufacturer specifies as aircraft-grade material. The alloy is chosen for its resistance to corrosion and its ability to tolerate heat and hard use over the life of the vehicle.\u003c\/p\u003e\u003cp\u003eAll tubing is mandrel bent at a 3 inch diameter, so the pipe keeps a consistent cross-section through every bend instead of collapsing the way crimped factory tubing does. Joints are TIG welded.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Retro Chambered mufflers give the GT a deep, assertive exhaust tone with a classic muscle car feel. Stainless Works says drone is kept to a minimum. The manufacturer is also clear that this is an aggressive setup, so drivers looking for a mild sound should consider a different system.\u003c\/p\u003e\u003cp\u003eStainless Works states that the H-pipe crossover strengthens low-end torque and sharpens throttle response while balancing flow. Together with the 3 inch mandrel-bent tubing, this is intended to improve flow over the restrictive factory components. No horsepower or torque figures are published.\u003c\/p\u003e\u003cp\u003eThe manufacturer notes a slight weight reduction compared with the stock exhaust, with the exact amount depending on trim and model year.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMust be installed with Stainless Works Performance Connect long tube headers. Direct fit applies only when paired with those headers.\u003c\/li\u003e\n\u003cli\u003eNot compatible with stock headers, the factory mid-pipe, or other stock exhaust components.\u003c\/li\u003e\n\u003cli\u003eNo tune is required for the cat-back alone, but a tune is strongly recommended when the system is run with headers.\u003c\/li\u003e\n\u003cli\u003eAll clamps and hardware are included.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompletes a matched Stainless Works header-back exhaust when paired with Stainless Works Performance Connect long tube headers.\u003c\/li\u003e\n\u003cli\u003eReplaces crimped, restrictive factory tubing with 3 inch mandrel-bent 304L stainless pipe.\u003c\/li\u003e\n\u003cli\u003eRetro Chambered mufflers deliver a pronounced, traditional V8 sound for non-active GT owners who find the factory exhaust too subdued.\u003c\/li\u003e\n\u003cli\u003eThe H-pipe is intended to improve low-end torque and throttle response.\u003c\/li\u003e\n\u003cli\u003eTIG-welded 304L stainless construction is built to resist corrosion and handle heat.\u003c\/li\u003e\n\u003cli\u003eAll clamps and hardware are supplied with the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not fit active exhaust cars\u003c\/li\u003e\n\u003cli\u003eNot compatible with stock headers or factory mid-pipe—this is a matched system design\u003c\/li\u003e\n\u003cli\u003eNot compatible with stock exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 inch cat-back exhaust with performance H-pipe\u003c\/li\u003e\n\u003cli\u003eRetro Chambered mufflers\u003c\/li\u003e\n\u003cli\u003eAll clamps and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless Works Performance Connect long tube headers (required, sold separately)\u003c\/li\u003e\n\u003cli\u003eEngine tune (strongly recommended when used with headers)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68304904716473,"sku":"SSWM15CB3-LMF","price":2085.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M15CB3-LMF_1.jpg?v=1794436027","url":"https:\/\/engmustangs.com\/products\/stainless-works-3-retro-chambered-cat-back-exhaust-system-w-h-pipe-performance-connect-2015-2017-mustang-gt-2026-mustang-gt-non-active-m15cb3-lmf","provider":"ENG Mustangs","version":"1.0","type":"link"}