The Stainless Works M15CB3-LMF is a 3 inch Retro Chambered cat-back exhaust that includes a performance H-pipe. It is built from mandrel-bent, TIG-welded 304L stainless steel and is designed for non-active-exhaust Mustang GT models from both the S550 and S650 generations. Factory exhaust on these cars is crimped, restrictive, and quiet for a V8 that revs beyond 7,000 rpm. This system replaces those parts with larger, smoother tubing and chambered mufflers that bring a traditional muscle car character to the exhaust note.
This is a Performance Connect system. It is engineered to bolt directly to Stainless Works Performance Connect long tube headers, so it does not mate to stock headers or the factory mid-pipe. It suits owners who are building, or planning to build, a complete Stainless Works header-back exhaust and want a matched stainless system with a pronounced, old-school sound. Owners who are not planning a full exhaust build would be better served by a Factory Connect system.
Key Features
- 3 inch mandrel-bent tubing
- 304L stainless steel construction, described by the manufacturer as aircraft-grade
- TIG-welded assembly
- Retro Chambered mufflers for a hard-edged muscle car sound with drone kept to a minimum
- Performance H-pipe intended to improve low-end torque and throttle response while balancing flow between banks
- Performance Connect design that mates directly to Stainless Works Performance Connect long tube headers
- Slight weight reduction compared to stock, varying by trim and model year
- For non-active exhaust Mustang GT models only
- Manufacturer part number M15CB3-LMF
Mandrel-Bent 304L Stainless Steel Construction
Stainless Works builds this system from 304L stainless steel, which the manufacturer specifies as aircraft-grade material. The alloy is chosen for its resistance to corrosion and its ability to tolerate heat and hard use over the life of the vehicle.
All tubing is mandrel bent at a 3 inch diameter, so the pipe keeps a consistent cross-section through every bend instead of collapsing the way crimped factory tubing does. Joints are TIG welded.
Performance and Benefits
The Retro Chambered mufflers give the GT a deep, assertive exhaust tone with a classic muscle car feel. Stainless Works says drone is kept to a minimum. The manufacturer is also clear that this is an aggressive setup, so drivers looking for a mild sound should consider a different system.
Stainless Works states that the H-pipe crossover strengthens low-end torque and sharpens throttle response while balancing flow. Together with the 3 inch mandrel-bent tubing, this is intended to improve flow over the restrictive factory components. No horsepower or torque figures are published.
The manufacturer notes a slight weight reduction compared with the stock exhaust, with the exact amount depending on trim and model year.
Installation
- Must be installed with Stainless Works Performance Connect long tube headers. Direct fit applies only when paired with those headers.
- Not compatible with stock headers, the factory mid-pipe, or other stock exhaust components.
- No tune is required for the cat-back alone, but a tune is strongly recommended when the system is run with headers.
- All clamps and hardware are included.
- Professional installation is recommended.
Why You Need This
- Completes a matched Stainless Works header-back exhaust when paired with Stainless Works Performance Connect long tube headers.
- Replaces crimped, restrictive factory tubing with 3 inch mandrel-bent 304L stainless pipe.
- Retro Chambered mufflers deliver a pronounced, traditional V8 sound for non-active GT owners who find the factory exhaust too subdued.
- The H-pipe is intended to improve low-end torque and throttle response.
- TIG-welded 304L stainless construction is built to resist corrosion and handle heat.
- All clamps and hardware are supplied with the system.
Vehicle Fitment
- 2015-2017 Ford Mustang GT
- 2026 Ford Mustang GT
Fitment notes:
- Does not fit active exhaust cars
- Not compatible with stock headers or factory mid-pipe—this is a matched system design
- Not compatible with stock exhaust components
What's Included
- 3 inch cat-back exhaust with performance H-pipe
- Retro Chambered mufflers
- All clamps and hardware
Not included:
- Stainless Works Performance Connect long tube headers (required, sold separately)
- Engine tune (strongly recommended when used with headers)