{"product_id":"roush-422093-stainless-steel-cat-back-exhaust-system-2018-2023-mustang-gt-and-2026-mustang-gt-non-active-w-quad-rear-valence-swap","title":"ROUSH 422093 Stainless Steel Cat-Back Exhaust System | 2018–2023 Mustang GT \u0026 2026 Mustang GT (Non-Active, w\/ Quad Rear Valence Swap)","description":"\u003cp\u003eThe ROUSH 422093 is a cat-back exhaust system for the 5.0L V8 Mustang GT, built entirely from 304 stainless steel. It replaces the factory exhaust from the catalytic converters rearward with a mandrel-bent X-pipe, integrated mid-pipes, a pair of high-flow mufflers, and four polished stainless tips. Roush designed it to give the Coyote-powered GT a more aggressive, race-inspired exhaust note and a sharper rear-end appearance while improving exhaust flow.\u003c\/p\u003e\n\u003cp\u003eFor owners who want the Roush Performance sound on their S550 or later GT, this system offers a complete bolt-in replacement backed by Roush testing and validation focused on increasing flow and lowering back pressure. Its corrosion-resistant 304 stainless construction is intended for long service life, and the quad polished tips give the car a finished look that matches the upgraded sound. Note that the system is designed around a quad-tip rear valance and is not intended for convertible models.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConstructed from 304 stainless steel for corrosion resistance and durability\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing maintains consistent diameter through bends to improve flow and reduce back pressure\u003c\/li\u003e\n\u003cli\u003eMandrel-bent X-pipe for the V8 exhaust\u003c\/li\u003e\n\u003cli\u003eIntegrated mid-pipes\u003c\/li\u003e\n\u003cli\u003eTwo high-flow mufflers tuned for an aggressive, race-inspired sound\u003c\/li\u003e\n\u003cli\u003eQuad polished 304 stainless steel exhaust tips\u003c\/li\u003e\n\u003cli\u003eDeveloped through Roush testing and validation to increase flow and lower back pressure\u003c\/li\u003e\n\u003cli\u003eDesigned for use with a quad-tip rear valance only\u003c\/li\u003e\n\u003cli\u003eNot compatible with convertible models\u003c\/li\u003e\n\u003cli\u003eRoush part number 422093\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eEvery major section of the ROUSH 422093 system is made from 304 stainless steel, an alloy chosen for its resistance to corrosion. That makes it well suited to a component that lives under the car and is exposed to heat cycles, moisture, and road debris.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel-bent, a process that keeps the pipe from crimping or narrowing as it is formed around bends. Roush put the design through testing and validation to confirm the system improves exhaust flow and reduces back pressure compared with a restrictive path. The visible quad tips are also 304 stainless with a polished finish.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is a central goal of this system. The combination of an X-pipe and two high-flow mufflers produces the aggressive, race-inspired tone Roush is known for, giving the 5.0L V8 a fuller and more pronounced voice than the stock setup.\u003c\/p\u003e\u003cp\u003eOn the flow side, the smooth mandrel-bent routing and reduced back pressure are intended to help the engine exhale more freely. Roush describes the result as an improvement in performance, though it does not publish specific horsepower or torque figures for this kit.\u003c\/p\u003e\u003cp\u003eVisually, the four polished stainless tips give the rear of the car a more aggressive appearance that complements the sound of the system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe system is designed to fit vehicles with a quad-tip rear valance only; cars without a quad-tip valance will require a valance swap\u003c\/li\u003e\n\u003cli\u003eNot compatible with convertible models\u003c\/li\u003e\n\u003cli\u003eRoush Performance advises confirming that the system complies with local noise regulations before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the signature Roush Performance exhaust sound from your 5.0L Mustang GT\u003c\/li\u003e\n\u003cli\u003eYou prefer 304 stainless steel components that resist corrosion over the long term\u003c\/li\u003e\n\u003cli\u003eYou want a complete cat-back package with X-pipe, mid-pipes, mufflers, and tips in one kit\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing is designed to improve flow and reduce back pressure\u003c\/li\u003e\n\u003cli\u003eQuad polished stainless tips upgrade the rear appearance of the car\u003c\/li\u003e\n\u003cli\u003eThe system is backed by a Roush 90-day parts warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with convertibles\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMandrel-bent X-pipe\u003c\/li\u003e\n\u003cli\u003eIntegrated mid-pipes\u003c\/li\u003e\n\u003cli\u003eTwo high-flow mufflers\u003c\/li\u003e\n\u003cli\u003eFour polished 304 stainless steel exhaust tips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eRoush 90-day parts warranty\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68305196384441,"sku":"RSH422093","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1d452aca56fed6b45678cbd33690c9cd.jpg?v=1794782241","url":"https:\/\/engmustangs.com\/products\/roush-422093-stainless-steel-cat-back-exhaust-system-2018-2023-mustang-gt-and-2026-mustang-gt-non-active-w-quad-rear-valence-swap","provider":"ENG Mustangs","version":"1.0","type":"link"}