The QTP Aggressor Cutout Pipes, part number 550015, are an electric exhaust cutout kit engineered specifically for the 2015-2017 Ford Mustang GT with the 5.0L V8. Instead of asking the installer to choose a mounting location and fabricate the plumbing, QTP has already worked out the routing for this application, with the layout chosen for clearance, sound, and power. The kit uses 2.5 inch 304 stainless steel mandrel-bent tubing paired with two electric valves controlled by a toggle switch.
The appeal of an electric cutout is the ability to choose how the car sounds at any given moment. With the valves closed, exhaust follows its normal path through the existing system for quieter operation. Flip the switch and the valves open, giving a much louder, more aggressive tone. The kit uses a cut and clamp installation, does not require welding, is made in the USA, and is compatible with aftermarket exhaust systems, making it a practical option for S550 GT owners who want driver-selectable sound without giving up a quiet mode.
Key Features
- Electric cutout pipe kit designed specifically for the 2015-2017 Mustang GT 5.0L
- Two electric valves operated by a toggle switch for on-demand control of sound and power
- 304 stainless steel construction throughout
- Mandrel-bent tubing with a 2.5 inch diameter
- Natural finish
- Cut and clamp installation with no welding required
- Vehicle-specific placement, so the mounting location is predetermined
- Compatible with aftermarket exhaust systems
- Not compatible with aftermarket long tube headers
- Made in the USA
USA-Made 304 Stainless Steel Mandrel-Bent Construction
QTP builds the Aggressor kit from 304 stainless steel, and the tubing is mandrel bent and produced in the USA. The 2.5 inch pipes are left in a natural finish, giving the system a clean stainless appearance under the car.
Because the kit is designed around this specific chassis, QTP has already determined where the cutouts sit and how the tubing is routed, with the goal of maintaining clearance while delivering the intended sound and performance. Stainless steel exhaust clamps are used to secure the components, keeping the hardware consistent with the rest of the system.
Performance and Benefits
The core benefit of this kit is driver control. The two electric valves are operated from a toggle switch, so you can keep the Mustang GT relatively quiet for daily driving or open the cutouts for a significantly louder, more aggressive exhaust note whenever you choose.
QTP states the layout was designed with sound and power in mind, and the system gives the user full control over both. No specific horsepower or torque figures are provided by the manufacturer.
Installation
- Installation uses a cut and clamp method, meaning the existing exhaust is cut and the cutout pipes are clamped in place
- No welding is required
- The mounting location is predetermined for this vehicle, so no layout planning is needed
- Instructions and hardware are supplied with the kit
- Will not fit vehicles equipped with aftermarket long tube headers
- Can be used with aftermarket exhaust systems
Why You Need This
- Switch between a quieter exhaust and a much louder one at any time using the included toggle switch
- Avoid fabrication work, since the routing and valve placement are already engineered for the 2015-2017 Mustang GT 5.0L
- Install without welding thanks to the cut and clamp design
- 304 stainless steel mandrel-bent tubing provides a durable, clean-looking setup
- Works alongside an existing aftermarket exhaust system
- Made in the USA
Vehicle Fitment
- 2015-2017 Ford Mustang GT
- 2015-2017 Ford Mustang GT (5.0L)
- 2015-2017 Ford Mustang GT (5.0L)
- 2015-2017 Ford Mustang GT (5.0L)
Fitment notes:
- Will not fit with aftermarket long tube headers
What's Included
- Exhaust clamps (stainless steel)
- Mandrel-bent 304 stainless steel tubing, made in the USA
- Two electric cutout valves with a toggle switch
- Installation instructions and mounting hardware