{"product_id":"pypes-3-x-bomb-and-bullet-mid-mufflers-cat-back-exhaust-kit-409-stainless-2026-mustang-gt","title":"Pypes 3\" X-Bomb and Bullet Mid-Mufflers Cat-Back Exhaust Kit (409 Stainless) | 2026 Mustang GT","description":"\u003cp\u003eThe Pypes 3 inch X-Bomb and Bullet Mid-Muffler Cat-Back Exhaust Kit, part number SFM96MX, is a complete cat-back system for the 2026 Mustang GT. It replaces the factory baffled mufflers and smaller-diameter tubing with 3 inch mandrel-bent 409 stainless steel, an X-Bomb crossover midsection, and straight-through bullet mid-mufflers. The goal is better exhaust flow and a deeper, more defined Coyote V8 tone that stays livable at highway speeds.\u003c\/p\u003e\n\u003cp\u003eThis is a fixed, non-valved system with no electronic bypasses or active exhaust hardware, so the sound stays the same at all times. Pypes designed it as a direct bolt-on that uses the factory mounting points and needs no tune or additional components. That makes it a sensible choice for GT owners who want a simpler, lighter exhaust, whether as a standalone upgrade or alongside headers, a cold air intake, or a performance tune.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 inch mandrel-bent tubing in 409 stainless steel\u003c\/li\u003e\n\u003cli\u003eX-Bomb midsection with an integrated X-crossover to improve tone and scavenging while cutting down on rasp\u003c\/li\u003e\n\u003cli\u003eStraight-through bullet-style mid-mufflers for an aggressive tone without added drone, according to Pypes\u003c\/li\u003e\n\u003cli\u003eFixed design with no valves or electronic bypasses\u003c\/li\u003e\n\u003cli\u003eLighter than the factory system because it deletes the resonators and bulky stock mufflers\u003c\/li\u003e\n\u003cli\u003eRear exit that accepts factory-style tips or aftermarket finishers\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on that uses the factory mounting points\u003c\/li\u003e\n\u003cli\u003eNo additional required components\u003c\/li\u003e\n\u003cli\u003eManufacturer part number SFM96MX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3 Inch Mandrel-Bent 409 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003ePypes builds this cat-back from 409 stainless steel, which offers strength and corrosion resistance while keeping the system affordable. The tubing is 3 inch diameter and mandrel-bent, which keeps the diameter consistent through the bends instead of crimping it, a clear step up from the undersized factory piping.\u003c\/p\u003e\u003cp\u003eThe layout is simple. Pypes removes the factory resonators and large stock mufflers and uses an X-Bomb crossover with compact straight-through bullet mufflers. With fewer components, the system is lighter than stock and has no valve motors or electronic parts to fail.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe X-Bomb crossover blends the pulses from each bank, which gives a smoother, cleaner exhaust note and helps scavenging. Pypes also says it reduces the harsh rasp that can come with less restrictive systems.\u003c\/p\u003e\u003cp\u003eThe straight-through bullet mid-mufflers give a deeper, more aggressive tone that is most noticeable under load. Pypes says the system stays tolerable while cruising on the freeway and does not add drone.\u003c\/p\u003e\u003cp\u003eLarger mandrel-bent tubing and fewer restrictive components improve exhaust flow, especially at the top end of the rev range. The deleted resonators and stock mufflers also reduce weight compared with the factory system.\u003c\/p\u003e\u003cp\u003ePypes notes that the tone may be more aggressive than some street-only owners want. If you prefer a very mild exhaust note, keep that in mind.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on fitment that uses the factory mounting points and clamps\u003c\/li\u003e\n\u003cli\u003eWorks without an ECU tune, adapter pieces, or any recalibration\u003c\/li\u003e\n\u003cli\u003eNo electronic modules or wiring harnesses to install, and no need to match the system to your axle ratio\u003c\/li\u003e\n\u003cli\u003ePypes recommends professional installation\u003c\/li\u003e\n\u003cli\u003eExperienced home mechanics with jack stands and a free weekend can complete the job\u003c\/li\u003e\n\u003cli\u003eFixed system with no provision for valve control; not compatible with OEM active exhaust systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the restrictive factory mufflers and smaller tubing with 3 inch mandrel-bent stainless piping for better flow\u003c\/li\u003e\n\u003cli\u003eGives the 5.0 Coyote a deeper, more aggressive sound while staying manageable on the highway, according to Pypes\u003c\/li\u003e\n\u003cli\u003eRemoves the resonators and bulky mufflers, so the system weighs less than stock\u003c\/li\u003e\n\u003cli\u003eNo valves, actuators, or electronics, so the system is simpler to own\u003c\/li\u003e\n\u003cli\u003eBolts on without a tune or extra parts and suits stock cars as well as builds with headers, intakes, or tunes\u003c\/li\u003e\n\u003cli\u003e409 stainless steel offers corrosion resistance at a reasonable price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2026 Ford Mustang Dark Horse \/ EcoBoost \/ GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not fit EcoBoost, GTD, GT350, GT500, or Dark Horse trims\u003c\/li\u003e\n\u003cli\u003eNot compatible with OEM active exhaust systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pypes","offers":[{"title":"Default Title","offer_id":68304905601209,"sku":"PYP-SFM96MX","price":744.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/SFM96MX-FSJC_1.jpg?v=1794436032","url":"https:\/\/engmustangs.com\/products\/pypes-3-x-bomb-and-bullet-mid-mufflers-cat-back-exhaust-kit-409-stainless-2026-mustang-gt","provider":"ENG Mustangs","version":"1.0","type":"link"}