{"product_id":"pypes-3-h-bomb-bullet-mid-mufflers-cat-back-exhaust-kit-stainless-tips-2026-mustang-gt","title":"Pypes 3\" H-Bomb Bullet Mid-Mufflers Cat-Back Exhaust Kit (Stainless Tips) | 2026 Mustang GT","description":"\u003cp\u003eThe Pypes 3 inch H-Bomb Bullet Mid-Mufflers Cat-Back Exhaust Kit, part number SFM96MH, replaces the restrictive, baffled factory exhaust on the 2026 Mustang GT with a free-flowing system built around 3 inch mandrel-bent 304 stainless steel tubing and straight-through H-Bomb bullet mid-mufflers. It is designed to reduce backpressure, sharpen throttle response, and give the 5.0L Coyote V8 a deep, raw, and loud exhaust note.\u003c\/p\u003e\n\u003cp\u003eThis kit suits GT owners who still run the stock cat-back and want more volume, a more aggressive tone, and less weight. It works on its own or alongside other bolt-on upgrades such as headers, an intake, or a tune. It bolts directly to the factory connection points, uses a fixed, non-valved layout with no resonators, and finishes with polished stainless tips.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull 3 inch tubing diameter throughout the cat-back system\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent flow without crushed bends\u003c\/li\u003e\n\u003cli\u003eH-Bomb bullet mid-mufflers with a straight-through design\u003c\/li\u003e\n\u003cli\u003eNo resonators in the system\u003c\/li\u003e\n\u003cli\u003ePolished stainless steel exhaust tips\u003c\/li\u003e\n\u003cli\u003eLighter than the factory exhaust due to the compact mid-muffler layout\u003c\/li\u003e\n\u003cli\u003eFixed, non-adjustable design with no electronic cutouts or valves\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on to factory connection points with no hanger modification or pipe cutting\u003c\/li\u003e\n\u003cli\u003eNo additional components required\u003c\/li\u003e\n\u003cli\u003eNo tuning or recalibration necessary\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: SFM96MH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003ePypes builds this cat-back from 304 stainless steel, from the 3 inch tubing through to the polished tips. The material choice gives the system the durability to match its performance role, and the polished tips provide a clean, sharp finish at the rear of the car.\u003c\/p\u003e\u003cp\u003eEvery bend in the system is mandrel-formed, which keeps the tubing diameter consistent through each curve instead of crushing or narrowing it. That consistency preserves the full 3 inch flow path from the factory connection point back to the tips.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe factory GT exhaust uses baffled mufflers that hold back flow and mute the engine. Replacing it with 3 inch tubing and straight-through H-Bomb bullet mid-mufflers reduces backpressure, which Pypes says improves throttle response and may yield gains in mid-range to top-end horsepower. No specific horsepower or torque figures are given by the manufacturer.\u003c\/p\u003e\u003cp\u003eSound is the defining trait of this kit. With straight-through mufflers and no resonators, it produces a deep, raw, and aggressive growl that Pypes describes as loud. The manufacturer states the system avoids highway drone, but owners who prefer a milder tone should consider a different Pypes kit.\u003c\/p\u003e\u003cp\u003eThe minimalist mid-muffler arrangement also removes bulk compared with the factory system, making the exhaust lighter than stock and simpler in layout.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on to the factory exhaust connection points\u003c\/li\u003e\n\u003cli\u003eNo hanger modification or pipe cutting required\u003c\/li\u003e\n\u003cli\u003eNo additional components needed to complete the installation\u003c\/li\u003e\n\u003cli\u003eNo tuning or recalibration required\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended\u003c\/li\u003e\n\u003cli\u003eCan be installed in a home garage using jack stands and patience\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the restrictive, baffled factory exhaust with a free-flowing 3 inch system\u003c\/li\u003e\n\u003cli\u003eDelivers a loud, aggressive exhaust note from the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eReduces backpressure for improved throttle response\u003c\/li\u003e\n\u003cli\u003eLighter than the factory cat-back\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction with mandrel-bent tubing and polished tips\u003c\/li\u003e\n\u003cli\u003eBolts on to factory connection points with no cutting and no tune required\u003c\/li\u003e\n\u003cli\u003ePairs well with headers, an intake, or a tune, and also works as a standalone upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang Dark Horse \/ EcoBoost \/ GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcludes EcoBoost and Dark Horse trims\u003c\/li\u003e\n\u003cli\u003eWill not fit EcoBoost, Dark Horse, or any GT350\/GT500 variants\u003c\/li\u003e\n\u003cli\u003eNot compatible with factory muffler valving or active exhaust systems—this is a fixed setup with no electronic cutouts or valves\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pypes","offers":[{"title":"Default Title","offer_id":68305047945401,"sku":"PYP-SFM96MH","price":744.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/SFM96MH-FSJC_1.jpg?v=1794436058","url":"https:\/\/engmustangs.com\/products\/pypes-3-h-bomb-bullet-mid-mufflers-cat-back-exhaust-kit-stainless-tips-2026-mustang-gt","provider":"ENG Mustangs","version":"1.0","type":"link"}