{"product_id":"pypes-3-h-bomb-bullet-mid-mufflers-cat-back-exhaust-kit-black-powder-coated-stainless-tips-2026-mustang-gt","title":"Pypes 3\" H-Bomb Bullet Mid-Mufflers Cat-Back Exhaust Kit (Black Powder-Coated Stainless Tips) | 2026 Mustang GT","description":"\u003cp\u003eThe Pypes H-Bomb Bullet cat-back exhaust kit (part number SFM96MHB) is a complete 3-inch system for the S650 Mustang GT. It removes the factory mufflers and crush-bent tubing and replaces them with mandrel-bent 304 stainless steel piping, straight-through H-Bomb bullet-style mid-mufflers, and stainless tips finished in black powder coat. Pypes designed the system to give the Coyote V8 a less restrictive path for exhaust flow and a deeper, louder, cleaner tone than the stock setup.\u003c\/p\u003e\n\u003cp\u003eThis system suits GT owners who want more volume and a more aggressive sound, especially those already running or planning bolt-ons such as intakes, headers, or a tune. It retains the factory mid-pipe layout and mounts at the OEM locations, so no cutting, welding, or bending is required. The blacked-out tips suit darker trim packages and murdered-out builds. It is a performance-focused system with no valves or cutouts, so it is not intended for drivers who want a mild or adjustable exhaust note.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull 3-inch tubing diameter throughout the cat-back\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing with smooth curves in place of the factory crush bends\u003c\/li\u003e\n\u003cli\u003eH-Bomb bullet-style mid-mufflers with a straight-through design that reduces backpressure\u003c\/li\u003e\n\u003cli\u003eBlack powder-coated stainless steel exhaust tips\u003c\/li\u003e\n\u003cli\u003eLighter than the factory cat-back because of the minimalist muffler design\u003c\/li\u003e\n\u003cli\u003eNon-adjustable design with no valves or cutouts\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment using OEM mounting locations, with no cutting, welding, or bending\u003c\/li\u003e\n\u003cli\u003eWorks with the factory mid-pipe layout\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: SFM96MHB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3-Inch Mandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003ePypes builds this cat-back entirely from 304 stainless steel, chosen for its resistance to rust and its long-term durability. The full 3-inch tubing is mandrel bent, so the pipe keeps a consistent diameter through every curve. Those smooth bends replace the crushed bends of the factory system and help keep flow unrestricted from the mid-pipe connection to the tips.\u003c\/p\u003e\u003cp\u003eThe tips are also stainless steel, finished in black powder coat rather than chrome. That finish gives the rear of the car a stealthy look that matches blacked-out trim and darker build themes.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe H-Bomb bullet mid-mufflers use a straight-through design that reduces backpressure and raises exhaust volume. According to Pypes, the result is a deeper, louder, and cleaner tone than the factory system, achieved without active exhaust valves and without drone.\u003c\/p\u003e\u003cp\u003eRemoving the bulky factory mufflers and restrictive bends cuts weight and restriction. The manufacturer says this frees up throttle response and improves airflow at higher RPM. The system is not adjustable, so the sound stays at a consistent, performance-oriented level.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation with no cutting, welding, or modification required\u003c\/li\u003e\n\u003cli\u003eUses the OEM mounting locations and works with the factory mid-pipe layout\u003c\/li\u003e\n\u003cli\u003eNo additional supporting hardware or components needed, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended, but the kit can be installed at home with proper tools and a lift or jack stands\u003c\/li\u003e\n\u003cli\u003ePypes notes that this kit removes exhaust valve functionality, which will set a diagnostic code unless it is tuned out or addressed with simulators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces restrictive factory mufflers and crush-bent tubing with a full 3-inch mandrel-bent system\u003c\/li\u003e\n\u003cli\u003eDelivers a louder, deeper tone than stock without relying on active valves\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction resists rust for long-term ownership\u003c\/li\u003e\n\u003cli\u003eBlack powder-coated tips give a chrome-free look that suits blacked-out builds\u003c\/li\u003e\n\u003cli\u003eLighter than the factory cat-back\u003c\/li\u003e\n\u003cli\u003eBolts in at the OEM mounting points with no fabrication\u003c\/li\u003e\n\u003cli\u003eA good match for GTs that already have, or will get, an intake, headers, or a tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not fit EcoBoost, GTD, or Dark Horse\u003c\/li\u003e\n\u003cli\u003eNot compatible with active exhaust systems\u003c\/li\u003e\n\u003cli\u003eWill not fit GTD, EcoBoost, GT350, GT500, or Dark Horse trims\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pypes","offers":[{"title":"Default Title","offer_id":68304904585401,"sku":"PYP-SFM96MHB","price":788.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/SFM96MHB-FSJC_1.jpg?v=1794436028","url":"https:\/\/engmustangs.com\/products\/pypes-3-h-bomb-bullet-mid-mufflers-cat-back-exhaust-kit-black-powder-coated-stainless-tips-2026-mustang-gt","provider":"ENG Mustangs","version":"1.0","type":"link"}