{"product_id":"mrt-3-sport-touring-cat-back-exhaust-system-with-dms-h-pipe-and-4-polished-tips-fastback-2015-2017-and-2026-mustang-gt-non-active","title":"MRT 3\" Sport Touring Cat-Back Exhaust System with DMS H-Pipe \u0026 4\" Polished Tips | Fastback 2015–2017 \u0026 2026 Mustang GT (Non-Active)","description":"\u003cp\u003eThe MRT Engineering 3\" Sport Touring Cat-Back Exhaust System, part number 93U913, replaces the entire rear section of the factory exhaust on Coyote-powered Mustang GT models without factory active exhaust. It uses 3\" mandrel-bent T304 stainless steel tubing, an MRT DMS H-pipe crossover, and quad 4\" polished stainless steel tips. The goal is to free up exhaust flow and produce a deeper, fuller V8 note than stock while keeping cabin drone under control at highway speeds.\u003c\/p\u003e\n\u003cp\u003eMRT positions the Sport Touring profile between stock and full race volume. It is noticeably louder and more aggressive than the factory system without becoming tiresome on long drives, and the H-pipe gives it a traditional muscle-car rumble. It suits Mustang GT owners who drive their cars daily or take them on spirited weekend runs and want more sound and flow while keeping the car comfortable on the street. It installs as a direct bolt-on at the factory mounting points and needs no tuning.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\" mandrel-bent tubing with smooth bends that reduce backpressure\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction for strength and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eMRT DMS H-pipe crossover that balances exhaust pulses for a classic muscle-car tone at controlled volume\u003c\/li\u003e\n\u003cli\u003eQuad 4\" polished stainless steel tips that sit cleanly in the rear valance\u003c\/li\u003e\n\u003cli\u003eMRT Sport Touring sound profile, tuned for low drone while cruising and more aggressive sound at wide open throttle\u003c\/li\u003e\n\u003cli\u003eLighter, more efficient layout than the factory system\u003c\/li\u003e\n\u003cli\u003eFixed geometry with no adjustments required\u003c\/li\u003e\n\u003cli\u003eComplete cat-back system with no additional components required\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation using factory mounting points\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration required\u003c\/li\u003e\n\u003cli\u003ePart number: 93U913\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMRT builds this cat-back from 3\" T304 stainless steel tubing, a material chosen for its strength and resistance to corrosion. Every bend is mandrel-formed, so the tubing keeps a smooth, consistent path through each turn instead of the restrictive kinks that come from crush bending.\u003c\/p\u003e\u003cp\u003eThe system uses fixed geometry, so there are no adjustable joints to set during installation. The 4\" tips are also polished stainless steel and are sized to fit the rear valance cleanly.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe smooth mandrel bends reduce backpressure compared with the factory system, and MRT states this improves performance throughout the powerband. The manufacturer does not publish a specific horsepower or torque figure.\u003c\/p\u003e\u003cp\u003eSound is shaped by the MRT DMS H-pipe crossover, which balances exhaust pulses between banks for a classic Detroit V8 rumble. The Sport Touring tone profile keeps the system civil at cruising speed to limit cabin drone and opens up at wide open throttle. The result is louder and more aggressive than stock but not overbearing.\u003c\/p\u003e\u003cp\u003eMRT also states that the layout is lighter and more efficient than the factory exhaust, which reduces weight compared with the stock system. No specific weight figure is given.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation with no cutting or welding required\u003c\/li\u003e\n\u003cli\u003eReuses the factory exhaust mounting points\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration needed\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to ensure proper tip alignment and system support\u003c\/li\u003e\n\u003cli\u003eReplaces the full cat-back section and is not designed to work with partial stock exhaust components\u003c\/li\u003e\n\u003cli\u003eNot designed for use with factory active exhaust valve actuators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the more restrictive factory cat-back with 3\" mandrel-bent tubing that reduces backpressure\u003c\/li\u003e\n\u003cli\u003eThe H-pipe crossover and Sport Touring profile give a deeper V8 tone while keeping highway drone in check\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists corrosion for long-term use on a daily-driven car\u003c\/li\u003e\n\u003cli\u003eInstalls at factory mounting points with no cutting, welding, or tuning\u003c\/li\u003e\n\u003cli\u003eComplete system that requires no additional components\u003c\/li\u003e\n\u003cli\u003eQuad 4\" polished tips update the rear appearance while fitting the factory valance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT, Fastback\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with convertibles or Mustangs equipped with factory active exhaust\u003c\/li\u003e\n\u003cli\u003eNot compatible with active exhaust — this system does not include or accommodate valve actuators\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MRT Engineering","offers":[{"title":"Default Title","offer_id":68305311498425,"sku":"MRT-93U913","price":1529.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/93u904-6.jpg?v=1794436083","url":"https:\/\/engmustangs.com\/products\/mrt-3-sport-touring-cat-back-exhaust-system-with-dms-h-pipe-and-4-polished-tips-fastback-2015-2017-and-2026-mustang-gt-non-active","provider":"ENG Mustangs","version":"1.0","type":"link"}