{"product_id":"mrt-3-extreme-cat-back-exhaust-system-with-4-polished-tips-fastback-2015-2017-and-2026-mustang-gt-non-active","title":"MRT 3\" Extreme Cat-Back Exhaust System with 4\" Polished Tips | Fastback 2015–2017 \u0026 2026 Mustang GT (Non-Active)","description":"\u003cp\u003eThe MRT Engineering 3\" Extreme Cat-Back Exhaust System (part number 93U912) replaces the entire factory exhaust from the catalytic converters rearward on non-active-exhaust Mustang GT models. It is built from T304 stainless steel, from the inlet all the way to the quad 4\" polished tips. It uses full 3\" mandrel-bent tubing and a straight-through layout that removes the factory mufflers and chambers. The goal is to cut restriction in the stock system and give the Coyote 5.0L a much more open, aggressive exhaust note.\u003c\/p\u003e\n\u003cp\u003eMRT describes this as the loudest, rawest cat-back in its lineup. That is because this version leaves out a crossover pipe entirely, in addition to omitting mufflers. It is aimed at Mustang GT owners who want maximum volume and are not concerned about drone or cabin comfort, including cars that already have the resonators deleted or long-tube headers installed. Drivers who want a more restrained tone are directed by MRT toward its H-pipe or resonated cat-back options instead.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull 3\" mandrel-bent tubing intended to minimize restriction and keep flow consistent throughout the rev range\u003c\/li\u003e\n\u003cli\u003eQuad 4\" polished stainless steel tips that follow the rear body lines\u003c\/li\u003e\n\u003cli\u003eHigh-flow straight-through design that eliminates the factory mufflers and chambers\u003c\/li\u003e\n\u003cli\u003eNo crossover pipe, making this the loudest and rawest cat-back configuration MRT offers\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction from front to tips for corrosion resistance and durability\u003c\/li\u003e\n\u003cli\u003eLighter than the factory system due to the simplified no-crossover, no-muffler layout\u003c\/li\u003e\n\u003cli\u003eFixed, non-adjustable design chosen for flow and clearance\u003c\/li\u003e\n\u003cli\u003eComplete bolt-on cat-back with no additional components required\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on to the OEM mid-pipe locations\u003c\/li\u003e\n\u003cli\u003eNo tuning, welding, or cutting required\u003c\/li\u003e\n\u003cli\u003eMRT part number 93U912\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eMRT builds this system entirely from T304 stainless steel, from the front connection through to the polished tips. The material is chosen for its strength, corrosion resistance, and long service life. That makes the system well suited to cars that see regular daily use as well as weekend driving.\u003c\/p\u003e\u003cp\u003eThe 3\" tubing is mandrel bent, which keeps the pipe diameter consistent through each bend rather than allowing it to crimp or narrow. The system uses a fixed design with no adjustable sections, which MRT specifies for optimal flow and clearance. It mounts at the factory mid-pipe locations as a direct bolt-on.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe straight-through layout removes the factory mufflers and chambers. Combined with the full 3\" mandrel-bent piping, this reduces restriction compared with the stock exhaust and supports steady flow across the rev range. MRT states the result is a clear improvement over stock in sound, throttle response, and overall character.\u003c\/p\u003e\u003cp\u003eBecause there is no crossover pipe and no mufflers, this is the most aggressive tone MRT produces. Expect a very loud exhaust note. MRT is explicit that the system is not intended for drivers who are sensitive to drone or who want a quiet cabin.\u003c\/p\u003e\u003cp\u003eThe simplified construction also makes the system lighter than the factory exhaust assembly.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts directly to the OEM mid-pipe locations\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eNo welding or cutting required\u003c\/li\u003e\n\u003cli\u003eNo additional components are needed; the system is a complete bolt-on cat-back\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to achieve proper tip alignment and fit\u003c\/li\u003e\n\u003cli\u003eReplaces the entire cat-back assembly, so it is not a muffler-only or axle-back replacement\u003c\/li\u003e\n\u003cli\u003eDesigned only for vehicles without active exhaust; it does not work with factory exhaust valves or their electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the loudest, most aggressive exhaust tone available in the MRT cat-back lineup\u003c\/li\u003e\n\u003cli\u003eYour Mustang GT already has resonators deleted or long-tube headers installed, and you want a matching rear exhaust\u003c\/li\u003e\n\u003cli\u003eYou want T304 stainless construction throughout for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eYou prefer a bolt-on upgrade that needs no tuning, welding, or cutting\u003c\/li\u003e\n\u003cli\u003eYou want to replace the restrictive factory mufflers and piping with a 3\" mandrel-bent straight-through system\u003c\/li\u003e\n\u003cli\u003eYou want a lighter exhaust than the factory assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT, Fastback\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with convertible models or active exhaust systems\u003c\/li\u003e\u003c\/ul\u003e","brand":"MRT Engineering","offers":[{"title":"Default Title","offer_id":68305439457465,"sku":"MRT-93U912","price":1250.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/93u902-2.jpg?v=1794436096","url":"https:\/\/engmustangs.com\/products\/mrt-3-extreme-cat-back-exhaust-system-with-4-polished-tips-fastback-2015-2017-and-2026-mustang-gt-non-active","provider":"ENG Mustangs","version":"1.0","type":"link"}