The MRT Engineering 3" Extreme Cat-Back Exhaust System (part number 93U912) replaces the entire factory exhaust from the catalytic converters rearward on non-active-exhaust Mustang GT models. It is built from T304 stainless steel, from the inlet all the way to the quad 4" polished tips. It uses full 3" mandrel-bent tubing and a straight-through layout that removes the factory mufflers and chambers. The goal is to cut restriction in the stock system and give the Coyote 5.0L a much more open, aggressive exhaust note.
MRT describes this as the loudest, rawest cat-back in its lineup. That is because this version leaves out a crossover pipe entirely, in addition to omitting mufflers. It is aimed at Mustang GT owners who want maximum volume and are not concerned about drone or cabin comfort, including cars that already have the resonators deleted or long-tube headers installed. Drivers who want a more restrained tone are directed by MRT toward its H-pipe or resonated cat-back options instead.
Key Features
- Full 3" mandrel-bent tubing intended to minimize restriction and keep flow consistent throughout the rev range
- Quad 4" polished stainless steel tips that follow the rear body lines
- High-flow straight-through design that eliminates the factory mufflers and chambers
- No crossover pipe, making this the loudest and rawest cat-back configuration MRT offers
- T304 stainless steel construction from front to tips for corrosion resistance and durability
- Lighter than the factory system due to the simplified no-crossover, no-muffler layout
- Fixed, non-adjustable design chosen for flow and clearance
- Complete bolt-on cat-back with no additional components required
- Direct bolt-on to the OEM mid-pipe locations
- No tuning, welding, or cutting required
- MRT part number 93U912
T304 Stainless Steel, Mandrel-Bent Construction
MRT builds this system entirely from T304 stainless steel, from the front connection through to the polished tips. The material is chosen for its strength, corrosion resistance, and long service life. That makes the system well suited to cars that see regular daily use as well as weekend driving.
The 3" tubing is mandrel bent, which keeps the pipe diameter consistent through each bend rather than allowing it to crimp or narrow. The system uses a fixed design with no adjustable sections, which MRT specifies for optimal flow and clearance. It mounts at the factory mid-pipe locations as a direct bolt-on.
Performance and Benefits
The straight-through layout removes the factory mufflers and chambers. Combined with the full 3" mandrel-bent piping, this reduces restriction compared with the stock exhaust and supports steady flow across the rev range. MRT states the result is a clear improvement over stock in sound, throttle response, and overall character.
Because there is no crossover pipe and no mufflers, this is the most aggressive tone MRT produces. Expect a very loud exhaust note. MRT is explicit that the system is not intended for drivers who are sensitive to drone or who want a quiet cabin.
The simplified construction also makes the system lighter than the factory exhaust assembly.
Installation
- Bolts directly to the OEM mid-pipe locations
- No tuning required
- No welding or cutting required
- No additional components are needed; the system is a complete bolt-on cat-back
- Professional installation is recommended to achieve proper tip alignment and fit
- Replaces the entire cat-back assembly, so it is not a muffler-only or axle-back replacement
- Designed only for vehicles without active exhaust; it does not work with factory exhaust valves or their electronics
Why You Need This
- You want the loudest, most aggressive exhaust tone available in the MRT cat-back lineup
- Your Mustang GT already has resonators deleted or long-tube headers installed, and you want a matching rear exhaust
- You want T304 stainless construction throughout for corrosion resistance
- You prefer a bolt-on upgrade that needs no tuning, welding, or cutting
- You want to replace the restrictive factory mufflers and piping with a 3" mandrel-bent straight-through system
- You want a lighter exhaust than the factory assembly
Vehicle Fitment
- 2015-2017 Ford Mustang GT, Fastback
- 2026 Ford Mustang GT
Fitment notes:
- Not compatible with convertible models or active exhaust systems