MRT Engineering

MRT 3" Extreme Cat-Back Exhaust System with 4" Black Ops Tips | Fastback 2015–2017 & 2026 Mustang GT (Non-Active)

$1,535.99
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The MRT Engineering Extreme Cat-Back Exhaust System, part number 93U912B, is a 3 inch stainless steel rear exhaust built for Coyote-powered Mustang GT owners who want the loudest tone MRT produces. It replaces the factory piping and mufflers from the OEM mid-pipe connection back. The design uses straight-through mufflers and leaves out both resonators and a crossover. It finishes with quad 4 inch Black Ops tips in a black ceramic coating instead of polished chrome.

The system is aimed at drivers whose priorities are volume, reduced restriction, and a blacked-out rear appearance. MRT positions it as a good match for cars with long-tube headers or high-revving naturally aspirated builds. It bolts directly to factory locations, reuses the OEM mounting points, and needs no tuning. The result is a substantial change in sound and appearance for non-active-exhaust Mustang GT models without a complicated installation.

Key Features

  • 3 inch mandrel-bent stainless steel tubing intended to remove the restrictions of the factory system
  • High-flow, straight-through mufflers tuned for an aggressive bark under throttle and a pronounced idle rumble
  • MRT's loudest tone configuration, with no resonators and no crossover
  • Quad 4 inch Black Ops tips with a durable black ceramic coating
  • Drone-limiting tuning intended to keep cabin noise tolerable on long drives
  • T304 stainless steel construction
  • Lighter than the factory exhaust because of its simpler, free-flowing layout
  • Fixed-fit, non-adjustable design for a plug-and-play installation
  • Complete bolt-on cat-back system with no additional components required
  • Designed for non-active exhaust vehicles, with no provision for exhaust valve integration
  • Part number 93U912B

T304 Stainless Steel Construction with Black Ceramic-Coated Tips

MRT builds the Extreme cat-back from T304 stainless steel tubing. The 3 inch piping is mandrel bent, which keeps the tube diameter consistent through each bend rather than pinching it the way crush bending can.

The quad 4 inch Black Ops tips have a black ceramic coating that MRT describes as durable. It gives the rear of the car a stealthy look in place of the polished chrome finish common on aftermarket tips. The fixed-fit layout uses the factory mounting points, so the system is built to hang on the car the same way the original exhaust did.

Performance and Benefits

MRT says the 3 inch mandrel-bent tubing and straight-through mufflers clear out the bottlenecks of the stock system, with the goal of sharper throttle response and better top-end power. The manufacturer does not publish specific horsepower or torque figures.

This is the most aggressive sound option in MRT's lineup. With no resonators or crossover in the system, the tone is raw and loud, with a focused bark under acceleration and a strong rumble at idle. MRT says the system is still tuned to limit drone, so it remains livable on longer trips.

The simpler, free-flowing design also weighs less than the factory exhaust, according to MRT. No specific weight savings figure is provided.

Installation

  • Direct bolt-on installation that connects at the OEM mid-pipe locations
  • Reuses the factory mounting points
  • No tuning or calibration required
  • Fixed-fit system with no adjustability, designed for plug-and-play fitment
  • No additional components are required to complete the installation
  • Professional installation is recommended for ideal tip alignment and long-term fitment
  • Not compatible with active exhaust systems, because the system has no provision for valve integration
  • Intended to be installed as a complete cat-back system, not combined with factory mufflers, axle-backs, or other mixed components

Why You Need This

  • You want the loudest, most aggressive exhaust tone MRT offers for a non-active Mustang GT
  • You prefer black ceramic-coated quad tips to a polished chrome finish
  • Your car runs long-tube headers or a high-revving naturally aspirated build, and you want a less restrictive rear section to match
  • You want a direct bolt-on system that reuses factory mounting points and needs no tuning
  • You want an exhaust that weighs less than the factory setup and is built from T304 stainless steel

Vehicle Fitment

  • 2015-2017 Ford Mustang GT, Fastback
  • 2026 Ford Mustang GT

Fitment notes:

  • Excludes convertible models and active exhaust-equipped Mustangs
  • not compatible with factory mufflers or axle-backs
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.