The MRT Engineering Sport Touring cat-back exhaust, part number 93U911, is a complete 3 inch system for the S550 Mustang GT Fastback. It replaces the factory piping and mufflers from the catalytic converters rearward with mandrel-bent T304 stainless steel tubing, a 3 inch H-pipe, straight-through Sport Touring mufflers, and 4 inch polished tips. The system is built in the USA by Mustang Racing Technologies.
This system is aimed at GT owners who want a louder, more aggressive exhaust note than the stock setup provides, without giving up a finished, polished appearance at the rear bumper. MRT describes the mandrel-bent H-pipe as a less restrictive path for exhaust flow, and the straight-through mufflers are tuned for a classic muscle car tone. The kit ships with the mounting hardware needed for installation and is intended for GT-model Fastback Mustangs only.
Key Features
- 3 inch mandrel-bent piping
- T304 stainless steel construction
- Polished finish
- 3 inch H-pipe crossover included
- Straight-through Sport Touring muffler design
- Aggressive exhaust note
- 4 inch double-walled tips with beveled edges, polished to a mirror-like gloss
- All necessary mounting hardware included
- Made in the USA
- Designed for GT-model Fastback Mustangs only (non-Active exhaust applications)
T304 Stainless Steel, Mandrel-Bent Construction
MRT builds the 93U911 from T304 stainless steel, including the H-pipe and the rest of the tubing. The system carries a polished finish, giving it a bright appearance that complements the exposed tips.
All piping is 3 inch diameter and mandrel bent, a forming method that keeps the tube diameter consistent through each bend rather than crimping or flattening it. MRT points to this mandrel-bent H-pipe as the basis for the system's less restrictive flow.
The exhaust exits through a pair of 4 inch tips with double-walled construction and beveled edges, polished to a mirror-like gloss. The system is manufactured in the USA.
Performance and Benefits
Sound is the primary focus of the Sport Touring system. Its straight-through mufflers are designed to deliver a louder, more aggressive tone with the character of a classic muscle car exhaust note.
According to MRT, the less restrictive flow through the mandrel-bent H-pipe produces noticeable improvements in horsepower and torque. The manufacturer does not publish specific figures or test conditions.
Installation
- All necessary mounting hardware is included with the system.
- This system will only fit GT-model Fastback Mustangs; it is listed for vehicles without the Active exhaust system.
Why You Need This
- You want a noticeably louder and more aggressive exhaust note than the factory system on your GT Fastback.
- Straight-through mufflers provide a traditional muscle car sound character.
- T304 stainless steel construction and a polished finish suit an exhaust that stays visible under the car and at the bumper.
- Consistent 3 inch mandrel-bent tubing and an included H-pipe give a complete cat-back replacement rather than a muffler-only change.
- Mounting hardware is supplied, so the kit arrives ready to bolt in.
- Built in the USA by MRT Engineering.
Vehicle Fitment
- 2015-2017 Ford Mustang GT
What's Included
- 3 inch H-pipe
- Sport Touring muffler, driver side
- Sport Touring muffler, passenger side
- Under-axle pipe, driver side
- Under-axle pipe, passenger side
- Band clamps
- All necessary mounting hardware