{"product_id":"mrt-2-5-street-race-axleback-exhaust-system-with-4-black-ops-tips-2015-2017-mustang-gt-2026-mustang-gt-non-active-91u901b","title":"MRT 2.5\" Street Race Axleback Exhaust System with 4\" Black Ops Tips (2015-2017 Mustang GT \/ 2026 Mustang GT Non-Active) - 91U901B","description":"\u003cp\u003eThe MRT Engineering 91U901B is a 2.5 inch axle-back exhaust system for the S550 and later Mustang GT, finished with 4 inch Black Ops tips. It is handcrafted from corrosion-resistant T304 stainless steel and uses mandrel-bent tubing. MRT designed it to give the GT's V8 a loud, deep muscle car tone while improving exhaust flow over the factory axle-back section.\u003c\/p\u003e\n\u003cp\u003eMRT describes this system as the loudest axle-back in its lineup, louder than its Sport Touring exhaust. It is a good fit for Mustang GT owners who want a stronger exhaust presence from a bolt-on axle-back without replacing the full system. For cars equipped with factory Active or Dual Mode exhaust valves, MRT offers a companion solution that lets the system be installed without a custom tune.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHandcrafted T304 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003e2.5 inch mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003e4 inch T304 stainless Black Ops tips\u003c\/li\u003e\n\u003cli\u003eDescribed by MRT as its loudest axle-back, louder than the MRT Sport Touring exhaust\u003c\/li\u003e\n\u003cli\u003eBalanced, deep muscle car exhaust tone\u003c\/li\u003e\n\u003cli\u003eIncreased exhaust flow compared with the factory axle-back section\u003c\/li\u003e\n\u003cli\u003eDrone described by MRT as noticeable but tolerable\u003c\/li\u003e\n\u003cli\u003eMore aggressive, louder sound at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eFor factory Active and Dual Mode exhaust valve equipped cars, MRT recommends its Part #92G155 plates so the system can be installed without a tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandcrafted T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMRT builds this axle-back by hand from T304 stainless steel, which resists corrosion. The 4 inch Black Ops tips are also T304 stainless, so the whole system uses the same material from the pipes to the outlets.\u003c\/p\u003e\u003cp\u003eThe 2.5 inch tubing is mandrel bent. Mandrel bending keeps the pipe's diameter consistent through each bend, which helps the system deliver the increased exhaust flow MRT attributes to this design.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMRT positions this as the most aggressive axle-back it offers. It is louder than the company's Sport Touring exhaust, and it is tuned to produce a balanced, deep muscle car tone that suits the Mustang GT's V8. Part of MRT's series aimed at a more prominent exhaust presence, it is meant to raise the volume and performance character of the car.\u003c\/p\u003e\u003cp\u003eAt wide-open throttle the exhaust gets noticeably louder and takes on a more aggressive performance note. MRT says drone is noticeable but tolerable, so it is a sensible choice for drivers who accept some cabin resonance in exchange for a louder exhaust. MRT also states that the increased exhaust flow brings a performance improvement, but it does not publish specific figures.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts as an axle-back, replacing the exhaust section behind the rear axle\u003c\/li\u003e\n\u003cli\u003eOn vehicles with factory Active or Dual Mode exhaust valves, MRT recommends its Part #92G155 plates so the system can be installed without a tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the loudest axle-back option MRT offers for the Mustang GT\u003c\/li\u003e\n\u003cli\u003eYou prefer a deep muscle car tone that becomes more aggressive at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eYou want T304 stainless construction that resists corrosion\u003c\/li\u003e\n\u003cli\u003eYou want more exhaust flow from a mandrel-bent 2.5 inch system with 4 inch tips\u003c\/li\u003e\n\u003cli\u003eYou can accept noticeable but tolerable drone in exchange for more volume\u003c\/li\u003e\n\u003cli\u003eYour GT has factory Active or Dual Mode valves and you want to upgrade without developing a tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.5 inch mandrel-bent T304 stainless steel axle-back tubing\u003c\/li\u003e\n\u003cli\u003e4 inch T304 stainless steel Black Ops tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MRT Engineering","offers":[{"title":"Default Title","offer_id":68305045848249,"sku":"MRT-91U901B","price":743.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/91u901-2_2_1.jpg?v=1794436055","url":"https:\/\/engmustangs.com\/products\/mrt-2-5-street-race-axleback-exhaust-system-with-4-black-ops-tips-2015-2017-mustang-gt-2026-mustang-gt-non-active-91u901b","provider":"ENG Mustangs","version":"1.0","type":"link"}