The MRT Engineering 91U901B is a 2.5 inch axle-back exhaust system for the S550 and later Mustang GT, finished with 4 inch Black Ops tips. It is handcrafted from corrosion-resistant T304 stainless steel and uses mandrel-bent tubing. MRT designed it to give the GT's V8 a loud, deep muscle car tone while improving exhaust flow over the factory axle-back section.
MRT describes this system as the loudest axle-back in its lineup, louder than its Sport Touring exhaust. It is a good fit for Mustang GT owners who want a stronger exhaust presence from a bolt-on axle-back without replacing the full system. For cars equipped with factory Active or Dual Mode exhaust valves, MRT offers a companion solution that lets the system be installed without a custom tune.
Key Features
- Handcrafted T304 stainless steel construction for corrosion resistance
- 2.5 inch mandrel-bent tubing
- 4 inch T304 stainless Black Ops tips
- Described by MRT as its loudest axle-back, louder than the MRT Sport Touring exhaust
- Balanced, deep muscle car exhaust tone
- Increased exhaust flow compared with the factory axle-back section
- Drone described by MRT as noticeable but tolerable
- More aggressive, louder sound at wide-open throttle
- For factory Active and Dual Mode exhaust valve equipped cars, MRT recommends its Part #92G155 plates so the system can be installed without a tune
Handcrafted T304 Stainless Steel Construction
MRT builds this axle-back by hand from T304 stainless steel, which resists corrosion. The 4 inch Black Ops tips are also T304 stainless, so the whole system uses the same material from the pipes to the outlets.
The 2.5 inch tubing is mandrel bent. Mandrel bending keeps the pipe's diameter consistent through each bend, which helps the system deliver the increased exhaust flow MRT attributes to this design.
Performance and Benefits
MRT positions this as the most aggressive axle-back it offers. It is louder than the company's Sport Touring exhaust, and it is tuned to produce a balanced, deep muscle car tone that suits the Mustang GT's V8. Part of MRT's series aimed at a more prominent exhaust presence, it is meant to raise the volume and performance character of the car.
At wide-open throttle the exhaust gets noticeably louder and takes on a more aggressive performance note. MRT says drone is noticeable but tolerable, so it is a sensible choice for drivers who accept some cabin resonance in exchange for a louder exhaust. MRT also states that the increased exhaust flow brings a performance improvement, but it does not publish specific figures.
Installation
- Mounts as an axle-back, replacing the exhaust section behind the rear axle
- On vehicles with factory Active or Dual Mode exhaust valves, MRT recommends its Part #92G155 plates so the system can be installed without a tune
Why You Need This
- You want the loudest axle-back option MRT offers for the Mustang GT
- You prefer a deep muscle car tone that becomes more aggressive at wide-open throttle
- You want T304 stainless construction that resists corrosion
- You want more exhaust flow from a mandrel-bent 2.5 inch system with 4 inch tips
- You can accept noticeable but tolerable drone in exchange for more volume
- Your GT has factory Active or Dual Mode valves and you want to upgrade without developing a tune
Vehicle Fitment
- 2015-2026 Ford Mustang GT, Fastback & Convertible
What's Included
- 2.5 inch mandrel-bent T304 stainless steel axle-back tubing
- 4 inch T304 stainless steel Black Ops tips