The Mishimoto Pro Axle-Back Exhaust is a replacement rear exhaust section for the S550 Mustang GT, built around the Coyote V8. It replaces the factory mufflers and tips with full 304 stainless steel, mandrel-bent tubing, small-diameter mufflers, and 4.5 inch double wall tips. This version is listed with black tips. Its main job is to give the GT a noticeably more aggressive exhaust note under both light and heavy throttle, while the muffler design keeps maximum sound output in check.
The system is designed specifically for the 2015 and later Mustang GT and works with both manual and automatic transmission cars. It mates to the stock exhaust piping and stays compatible with the factory center resonator, Mishimoto X-pipes and H-pipes, and other aftermarket mid-pipes, so it can be part of a staged exhaust build. It also carries the Mishimoto Lifetime Warranty.
Key Features
- Full 304 stainless steel construction
- Mandrel-bent tubing to maintain flow from the Coyote V8
- TIG-welded assembly
- Small-diameter mufflers that amplify exhaust tone over the stock mufflers while limiting maximum sound output
- Aggressive exhaust tone under light and heavy acceleration
- 4.5 inch double wall exhaust tips, offered in polished or high-temperature black paint finishes (this listing: black tips)
- Cut-and-clamp design developed specifically for the 2015+ Mustang GT
- Bolt-on exhaust hangers for added adjustability and easier installation
- Mates to the stock exhaust piping
- Compatible with the stock center resonator, Mishimoto X-pipes and H-pipes, or other aftermarket mid-pipes
- Fits both manual and automatic transmission vehicles
304 Stainless Steel, Mandrel-Bent Construction
Mishimoto builds this axle-back entirely from 304 stainless steel, and the tubing is mandrel bent so the pipe keeps a consistent diameter through each bend instead of crimping. The joints are TIG welded, and the tips use double wall construction at a 4.5 inch diameter. On this version, the tips are finished in high-temperature black paint.
Bolt-on exhaust hangers are part of the design, which allows the system to be adjusted for proper alignment and tip position during installation.
Performance and Benefits
Sound is the central focus of this system. Mishimoto uses small-diameter mufflers that significantly increase exhaust tone compared to the factory mufflers, giving the Coyote V8 a more aggressive voice under both light and heavy acceleration. The same muffler design also caps the maximum sound output, so the volume increase is controlled rather than unrestricted.
The mandrel-bent 304 stainless tubing is intended to provide good flow from the Coyote engine. For owners planning further exhaust work, Mishimoto recommends pairing this axle-back with its X-pipe or H-pipe, and the system also works with the stock center resonator or other aftermarket mid-pipes.
Installation
- Mishimoto states installation takes under an hour
- Cut-and-clamp design specific to the 2015+ Mustang GT
- Mates to the factory exhaust piping
- Bolt-on exhaust hangers allow adjustment during fitment
- Fits both manual and automatic transmission cars
Why You Need This
- You want a noticeably more aggressive exhaust tone than the factory mufflers deliver, without unrestricted maximum volume
- You prefer 304 stainless steel, mandrel-bent, TIG-welded construction for a long-lasting rear exhaust section
- You plan to add a Mishimoto X-pipe, H-pipe, or other aftermarket mid-pipe later and want an axle-back that is compatible with them
- You want a project Mishimoto rates at under an hour of install time
- You want a part backed by the Mishimoto Lifetime Warranty
Vehicle Fitment
- 2015 Ford Mustang GT
- 2015-2026 Ford Mustang GT
Warranty
Mishimoto Lifetime Warranty