{"product_id":"milltek-active-valved-cat-back-with-x-pipe-system-polished-tips-2026-mustang-5-0l-gt-fastback","title":"Milltek Active Valved Cat-Back with X-Pipe System (Polished Tips) – 2026 Mustang 5.0L GT Fastback","description":"\u003cp\u003eMilltek's active valved cat-back for the 2026 Mustang GT Fastback, part number SSXFD425, pairs an X-pipe crossover with polished quad tips. It removes the factory mufflers and resonators and replaces them with a straight-through, high-flow design. The stock midsection gives way to an X-pipe that brings out a sharper, raspier tone at higher RPM. The entire system is fabricated from T304 stainless steel.\u003c\/p\u003e\n\u003cp\u003eThe main reason to choose this system is that it keeps the car's factory active exhaust working. The OEM valve actuators move over to the new system, so drive-mode control stays in place without extra wiring or a tune. You can keep the car subdued for daily driving and open it up when conditions allow. It installs as a direct bolt-on and suits stock GTs as well as cars already running a cold air intake or a tune, provided the car was built with the factory active exhaust option.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number SSXFD425\u003c\/li\u003e\n\u003cli\u003eConstructed from T304 stainless steel\u003c\/li\u003e\n\u003cli\u003ePolished quad tips with a classic stainless finish\u003c\/li\u003e\n\u003cli\u003eX-pipe midsection replaces the factory midsection for a sharper, higher-pitched tone at wide-open throttle compared with H-pipe designs\u003c\/li\u003e\n\u003cli\u003eStraight-through, high-flow layout that eliminates the factory mufflers and resonators\u003c\/li\u003e\n\u003cli\u003eRetains full function of the factory active exhaust valves and drive-mode control\u003c\/li\u003e\n\u003cli\u003eIntegrates directly with the OEM valve actuators; no tune required\u003c\/li\u003e\n\u003cli\u003eLighter than the stock system thanks to thinner-wall stainless tubing and fewer internal restrictions\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment with no cutting, trimming, or welding\u003c\/li\u003e\n\u003cli\u003eCompatible with both manual and automatic transmission cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMilltek builds this cat-back from T304 stainless steel, chosen for its durability, corrosion resistance, and ability to withstand repeated heat cycles and high mileage. The quad tips are polished stainless, giving the rear of the car a clean, finished look that complements the build without drawing attention away from it.\u003c\/p\u003e\u003cp\u003eAccording to Milltek, the system weighs less than the factory exhaust. The savings come from thinner-wall stainless tubing and the removal of internal restrictions found in the stock mufflers and resonators.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory mufflers and resonators in favor of a straight-through design opens up the exhaust path. The manufacturer states this improves flow and throttle response compared with the stock system.\u003c\/p\u003e\u003cp\u003eThe X-pipe crossover shapes the sound toward a smoother, raspier, European-style character. It is aimed at owners who prefer a sharper, higher-pitched note at wide-open throttle over the deeper tone typical of H-pipe setups.\u003c\/p\u003e\u003cp\u003eBecause the factory active valves remain in service, the selected drive mode still controls exhaust volume. You can run quietly on the commute and open the valves on a back road, all without wiring changes or calibration work.\u003c\/p\u003e\u003cp\u003eThe system works on its own as a complete cat-back. The manufacturer notes that pairing it with headers or a high-flow mid-pipe is needed to realize the full benefit.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation with no cutting, trimming, or welding required\u003c\/li\u003e\n\u003cli\u003eFactory exhaust valve actuators are transferred from the stock system; no additional components are required\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration is necessary\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to ensure correct fitment and tip alignment\u003c\/li\u003e\n\u003cli\u003eThe vehicle must be equipped with the factory active exhaust option; the system will not operate correctly on non-valved cars\u003c\/li\u003e\n\u003cli\u003eNot designed for convertible models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeeps factory active valve and drive-mode control, so volume stays adjustable between quiet and open\u003c\/li\u003e\n\u003cli\u003eReplaces restrictive factory mufflers and resonators with a straight-through, high-flow design\u003c\/li\u003e\n\u003cli\u003eX-pipe midsection delivers a sharper, raspier tone than the stock system\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists corrosion and holds up to heat cycling and mileage\u003c\/li\u003e\n\u003cli\u003eBolts on without cutting, welding, or a tune\u003c\/li\u003e\n\u003cli\u003eWeighs less than the factory cat-back\u003c\/li\u003e\n\u003cli\u003ePolished quad tips give the rear a clean, understated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":68304938205369,"sku":"MTK-SSXFD425","price":3153.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/SSXFD425_1.jpg?v=1794376259","url":"https:\/\/engmustangs.com\/products\/milltek-active-valved-cat-back-with-x-pipe-system-polished-tips-2026-mustang-5-0l-gt-fastback","provider":"ENG Mustangs","version":"1.0","type":"link"}