Milltek's active valved cat-back for the 2026 Mustang GT Fastback, part number SSXFD425, pairs an X-pipe crossover with polished quad tips. It removes the factory mufflers and resonators and replaces them with a straight-through, high-flow design. The stock midsection gives way to an X-pipe that brings out a sharper, raspier tone at higher RPM. The entire system is fabricated from T304 stainless steel.
The main reason to choose this system is that it keeps the car's factory active exhaust working. The OEM valve actuators move over to the new system, so drive-mode control stays in place without extra wiring or a tune. You can keep the car subdued for daily driving and open it up when conditions allow. It installs as a direct bolt-on and suits stock GTs as well as cars already running a cold air intake or a tune, provided the car was built with the factory active exhaust option.
Key Features
- Manufacturer part number SSXFD425
- Constructed from T304 stainless steel
- Polished quad tips with a classic stainless finish
- X-pipe midsection replaces the factory midsection for a sharper, higher-pitched tone at wide-open throttle compared with H-pipe designs
- Straight-through, high-flow layout that eliminates the factory mufflers and resonators
- Retains full function of the factory active exhaust valves and drive-mode control
- Integrates directly with the OEM valve actuators; no tune required
- Lighter than the stock system thanks to thinner-wall stainless tubing and fewer internal restrictions
- Direct bolt-on fitment with no cutting, trimming, or welding
- Compatible with both manual and automatic transmission cars
T304 Stainless Steel Construction
Milltek builds this cat-back from T304 stainless steel, chosen for its durability, corrosion resistance, and ability to withstand repeated heat cycles and high mileage. The quad tips are polished stainless, giving the rear of the car a clean, finished look that complements the build without drawing attention away from it.
According to Milltek, the system weighs less than the factory exhaust. The savings come from thinner-wall stainless tubing and the removal of internal restrictions found in the stock mufflers and resonators.
Performance and Benefits
Removing the factory mufflers and resonators in favor of a straight-through design opens up the exhaust path. The manufacturer states this improves flow and throttle response compared with the stock system.
The X-pipe crossover shapes the sound toward a smoother, raspier, European-style character. It is aimed at owners who prefer a sharper, higher-pitched note at wide-open throttle over the deeper tone typical of H-pipe setups.
Because the factory active valves remain in service, the selected drive mode still controls exhaust volume. You can run quietly on the commute and open the valves on a back road, all without wiring changes or calibration work.
The system works on its own as a complete cat-back. The manufacturer notes that pairing it with headers or a high-flow mid-pipe is needed to realize the full benefit.
Installation
- Direct bolt-on installation with no cutting, trimming, or welding required
- Factory exhaust valve actuators are transferred from the stock system; no additional components are required
- No tuning or calibration is necessary
- Professional installation is recommended to ensure correct fitment and tip alignment
- The vehicle must be equipped with the factory active exhaust option; the system will not operate correctly on non-valved cars
- Not designed for convertible models
Why You Need This
- Keeps factory active valve and drive-mode control, so volume stays adjustable between quiet and open
- Replaces restrictive factory mufflers and resonators with a straight-through, high-flow design
- X-pipe midsection delivers a sharper, raspier tone than the stock system
- T304 stainless steel construction resists corrosion and holds up to heat cycling and mileage
- Bolts on without cutting, welding, or a tune
- Weighs less than the factory cat-back
- Polished quad tips give the rear a clean, understated finish
Vehicle Fitment
- 2026 Ford Mustang GT (5.0L), Fastback