{"product_id":"milltek-active-valved-cat-back-with-x-pipe-system-burnt-blue-titanium-tips-2026-mustang-5-0l-gt-fastback","title":"Milltek Active Valved Cat-Back with X-Pipe System (Burnt Blue Titanium Tips) – 2026 Mustang 5.0L GT Fastback","description":"\u003cp\u003eThis Milltek cat-back exhaust, part number SSXFD428, is built for 2026 Mustang GT Fastback owners whose cars came with the factory active exhaust. It pairs an X-pipe midsection with quad tips in a heat-treated burnt blue titanium finish. It is designed to give the Coyote 5.0L V8 a sharper, more aggressive voice while keeping the stock valve control fully functional, so the tone still changes with the selected drive mode.\u003c\/p\u003e\n\u003cp\u003eThe system is constructed from T304 stainless steel and bolts directly into place with no cutting or welding. It reuses the factory valve actuators and needs no tuning or ECU changes. Milltek positions it as a way to reduce restriction and weight compared to the stock exhaust, and it suits both a first modification and a car already running an intake, a tune, or planned headers.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system with an X-pipe crossover midsection\u003c\/li\u003e\n\u003cli\u003eRetains full factory active exhaust valve functionality; tone varies by drive mode\u003c\/li\u003e\n\u003cli\u003eReuses the OEM valve actuators, with no additional components required\u003c\/li\u003e\n\u003cli\u003eQuad exhaust tips with a heat-treated burnt blue titanium finish\u003c\/li\u003e\n\u003cli\u003eFull T304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eLess restrictive mufflers and reduced material mass compared to the stock system\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eNo tuning or ECU modifications needed\u003c\/li\u003e\n\u003cli\u003eCompatible with manual and automatic transmissions on the 5.0L V8 GT Fastback\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: SSXFD428\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMilltek builds this system entirely from T304 stainless steel, chosen to withstand hard driving and high mileage without corroding or deteriorating.\u003c\/p\u003e\u003cp\u003eThe quad tips receive a heat-treated burnt blue titanium-style finish. This gives the rear of the car a custom look that stands apart from the factory tips.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe X-pipe crossover blends exhaust pulses between banks for a tighter, smoother, more refined tone, most noticeably in the mid to upper RPM range. Compared with the deeper note of an H-pipe layout, Milltek describes the X-pipe character as a European-style rasp, and credits the design with improving top-end power.\u003c\/p\u003e\u003cp\u003eBy reducing restriction compared to the stock mufflers and resonators, the system is intended to improve exhaust velocity and sharpen the engine's tone. Milltek also states the system saves weight over stock through less restrictive mufflers and reduced material mass.\u003c\/p\u003e\u003cp\u003eBecause the system connects to the OEM active exhaust, the factory drive modes still control the valves. The car can run quietly when needed and open up when wanted.\u003c\/p\u003e\u003cp\u003eMilltek notes that restrictions upstream of the cat-back will still limit output. For the full performance benefit, it suggests pairing the system with headers or a high-flow mid-pipe.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation; no cutting or welding required\u003c\/li\u003e\n\u003cli\u003eFactory active exhaust valve actuators must be transferred to the new system\u003c\/li\u003e\n\u003cli\u003eNo tuning or ECU modifications needed\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to ensure proper valve transfer and tip alignment\u003c\/li\u003e\n\u003cli\u003eWorks only on cars equipped with the factory active exhaust; it will not function on non-valved cars\u003c\/li\u003e\n\u003cli\u003eIntended for Fastback models only; not for convertibles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a more aggressive exhaust note than the stock GT system while keeping factory valve control for quieter operation when needed\u003c\/li\u003e\n\u003cli\u003eThe X-pipe layout produces a smoother, more refined tone at mid to high RPM than an H-pipe style system\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction is built for long-term durability under hard use\u003c\/li\u003e\n\u003cli\u003eBolts on with the factory valve actuators and requires no tune or wiring changes\u003c\/li\u003e\n\u003cli\u003eBurnt blue titanium-finish quad tips provide a distinctive appearance at the rear of the car\u003c\/li\u003e\n\u003cli\u003eWorks as a standalone upgrade or as part of a build that includes an intake, a tune, or future headers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":68304905863353,"sku":"MTK-SSXFD428","price":4052.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/SSXFD428_1.jpg?v=1794375667","url":"https:\/\/engmustangs.com\/products\/milltek-active-valved-cat-back-with-x-pipe-system-burnt-blue-titanium-tips-2026-mustang-5-0l-gt-fastback","provider":"ENG Mustangs","version":"1.0","type":"link"}