{"product_id":"milltek-active-valved-cat-back-with-x-pipe-system-brushed-titanium-tips-2026-mustang-5-0l-gt-fastback","title":"Milltek Active Valved Cat-Back with X-Pipe System (Brushed Titanium Tips) – 2026 Mustang 5.0L GT Fastback","description":"\u003cp\u003eMilltek's active valved cat-back for the 2026 Mustang GT Fastback, part number SSXFD427, swaps out the factory resonators and mufflers for a T304 stainless steel system. It uses an X-pipe crossover and finishes with quad tips in a brushed titanium finish. The goal is a sharper, clearer exhaust note and less restriction than the stock H-pipe layout, while keeping the factory active exhaust valves working.\u003c\/p\u003e\n\u003cp\u003eThe system bolts directly to 5.0L Coyote-powered GT Fastbacks equipped with the factory active exhaust and works with both manual and automatic transmissions. It suits street-driven builds that already run, or plan to add, a cold air intake, tune, or headers. Because the OEM valve system stays functional, you can still switch between a subdued and a more aggressive sound through the drive modes. The tips are styled to look understated rather than flashy.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number SSXFD427\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eX-pipe midsection in place of the factory H-pipe\u003c\/li\u003e\n\u003cli\u003eQuad tips with a brushed titanium finish\u003c\/li\u003e\n\u003cli\u003eReplaces the factory resonators and mufflers\u003c\/li\u003e\n\u003cli\u003eWorks fully with the OEM active exhaust valve system for quiet, cruise, and loud modes\u003c\/li\u003e\n\u003cli\u003eReuses the factory valve motors and actuators, so no extra components are needed\u003c\/li\u003e\n\u003cli\u003eSaves weight over stock through reduced muffler mass and more efficient pipe routing\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment with no cutting, welding, or fabrication\u003c\/li\u003e\n\u003cli\u003eNo tuning or recalibration required\u003c\/li\u003e\n\u003cli\u003eCompatible with manual and automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction with Brushed Titanium-Finish Tips\u003c\/h3\u003e\u003cp\u003eMilltek builds the system from T304 stainless steel, which is chosen to handle daily driving, repeated heat cycles, and road grime without giving up flow or strength. The pipe routing is designed to be more efficient than the factory layout. Together with the reduced muffler mass, that routing saves weight compared with the stock cat-back.\u003c\/p\u003e\u003cp\u003eThe system ends in four tips with a brushed titanium finish. Milltek describes them as corrosion-resistant and motorsport-inspired, with a restrained OEM+ appearance.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonators and mufflers is intended to reduce restriction and improve throttle response. The X-pipe crossover is designed to give a cleaner, more exotic sound with better clarity at high RPM than the stock H-pipe. Milltek describes the tone as crisp and Euro-style: refined under load, aggressive at wide-open throttle, and without drone.\u003c\/p\u003e\u003cp\u003eBecause the system keeps the OEM active valves, sound remains adjustable through the drive modes. You can open the valves on command or keep things quiet, for example during cold starts.\u003c\/p\u003e\u003cp\u003eMilltek notes that the best results come from pairing this cat-back with headers or high-flow mid-pipes. Peak output should not be expected with the stock manifolds.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on; no cutting, welding, or fabrication required\u003c\/li\u003e\n\u003cli\u003eReuses the OEM active exhaust valve actuators\u003c\/li\u003e\n\u003cli\u003eNo tuning or recalibration required\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended to ensure proper fit and correct valve motor positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwap the factory H-pipe, resonators, and mufflers for a T304 stainless X-pipe system aimed at a sharper tone and better flow\u003c\/li\u003e\n\u003cli\u003eKeep drive mode sound control, since the factory active valves stay fully functional\u003c\/li\u003e\n\u003cli\u003eInstall without cutting, welding, or retuning the vehicle\u003c\/li\u003e\n\u003cli\u003eLose some weight compared with the stock cat-back\u003c\/li\u003e\n\u003cli\u003eBuild on existing or planned intake, tune, or header upgrades with a complete cat-back system rather than a mix of separate parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with convertibles due to chassis and clearance differences\u003c\/li\u003e\u003c\/ul\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":68305047027897,"sku":"MTK-SSXFD427","price":3594.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/SSXFD427_1.jpg?v=1794376861","url":"https:\/\/engmustangs.com\/products\/milltek-active-valved-cat-back-with-x-pipe-system-brushed-titanium-tips-2026-mustang-5-0l-gt-fastback","provider":"ENG Mustangs","version":"1.0","type":"link"}