{"product_id":"milltek-active-valved-cat-back-with-h-pipe-system-polished-tips-2026-mustang-5-0l-gt-fastback","title":"Milltek Active Valved Cat-Back with H-Pipe System (Polished Tips) – 2026 Mustang 5.0L GT Fastback","description":"\u003cp\u003eThe Milltek Active Valved Cat-Back with H-Pipe (part number SSXFD429) is a complete T304 stainless steel cat-back exhaust for the 2026 Mustang GT Fastback with the 5.0L Coyote V8. It replaces the factory system from the catalytic converters back, pairing an H-pipe crossover with polished quad tips. It works with the car's factory active valve hardware, so you keep driver-selectable sound control from the original electronics.\u003c\/p\u003e\n\u003cp\u003eMilltek designed this system for owners who find the stock GT exhaust too subdued and want a deeper, more distinctive tone without excessive freeway drone. According to the manufacturer, reduced backpressure and improved exhaust velocity help the system flow better than stock and sharpen throttle response. It bolts on directly, needs no tune, and is intended to work alongside other bolt-on modifications, which makes it a practical first exhaust upgrade for a daily-driven GT that came with factory active exhaust.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull T304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003ePolished quad exhaust tips with a mirror-like finish\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover design that Milltek says improves low-end torque and produces a smoother, deeper tone\u003c\/li\u003e\n\u003cli\u003eActive valve integration that reuses the factory valve actuators\u003c\/li\u003e\n\u003cli\u003eSound adjusts with driving mode or throttle input through the factory active valve system\u003c\/li\u003e\n\u003cli\u003eSwitches between quiet and aggressive modes without changing any parts\u003c\/li\u003e\n\u003cli\u003eManufacturer states the system is lighter than the OEM exhaust\u003c\/li\u003e\n\u003cli\u003eLess restrictive mufflers than the factory system\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment with no cutting, welding, or fabrication\u003c\/li\u003e\n\u003cli\u003eNo tuning or recalibration required\u003c\/li\u003e\n\u003cli\u003eSuitable for automatic and manual transmission cars\u003c\/li\u003e\n\u003cli\u003ePart number SSXFD429\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMilltek builds the entire system from T304 stainless steel, which resists corrosion and holds up over the long term. The manufacturer says the system should keep its performance as it ages rather than degrading with use.\u003c\/p\u003e\u003cp\u003eThe tips are polished to a bright, mirror-like finish. The look is clean and refined without being loud, and it fits a stock-appearing car as well as a modified build. Milltek credits the higher-grade material and less restrictive mufflers for making the system lighter than the factory exhaust.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe system reduces backpressure and increases exhaust velocity compared with the stock setup. Milltek says this produces a more aggressive tone and quicker throttle response. The H-pipe crossover is intended to improve low-end torque and give the exhaust a smoother, deeper growl rather than a thin, raspy note.\u003c\/p\u003e\u003cp\u003eBecause it uses the factory active valves, you keep control over the sound. Drive quietly when the situation calls for it, or open the valves for a more aggressive note, all through the car's existing valve system. Milltek describes the overall character as a middle ground between mild and wild: noticeably stronger than stock, but not overwhelming at highway speeds.\u003c\/p\u003e\u003cp\u003eMilltek notes that the system improves a car with stock manifolds, but pairing it with headers or other upstream exhaust upgrades will get the most from it. The manufacturer suggests installing it as part of a full exhaust upgrade for the greatest performance and tone improvement.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation with no cutting, welding, or fabrication\u003c\/li\u003e\n\u003cli\u003eReuses the OEM active valve motors\u003c\/li\u003e\n\u003cli\u003eNo tuning or recalibration required\u003c\/li\u003e\n\u003cli\u003eNo additional components required for installation\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended to ensure proper fitment and valve setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives the 2026 GT a deeper, more characterful exhaust note than the muted factory system\u003c\/li\u003e\n\u003cli\u003eKeeps adjustable sound control by working with the factory active valve actuators and electronics\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists corrosion for long-term durability\u003c\/li\u003e\n\u003cli\u003ePolished quad tips add a clean, understated finish at the rear of the car\u003c\/li\u003e\n\u003cli\u003eBolts on without fabrication and needs no tune, so it suits daily drivers and first-time exhaust upgrades\u003c\/li\u003e\n\u003cli\u003eLighter than the OEM exhaust, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eWorks alongside other bolt-ons and can be part of a broader exhaust build with headers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with convertible models\u003c\/li\u003e\u003c\/ul\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":68304906649785,"sku":"MTK-SSXFD429","price":3105.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/SSXFD429_1.jpg?v=1794375682","url":"https:\/\/engmustangs.com\/products\/milltek-active-valved-cat-back-with-h-pipe-system-polished-tips-2026-mustang-5-0l-gt-fastback","provider":"ENG Mustangs","version":"1.0","type":"link"}