{"product_id":"mbrp-aluminized-steel-3-street-cat-back-exhaust-w-dual-split-rear-2024-2026-mustang-gt-s7251al","title":"MBRP Aluminized Steel 3\" Street Cat-Back Exhaust w\/ Dual Split Rear (2024-2026 Mustang GT) – S7251AL","description":"\u003cp\u003eThe MBRP S7251AL is a Street Series cat-back exhaust built for the S650 Mustang GT with the 5.0L Coyote V8. It uses 3-inch mandrel-bent aluminized steel tubing routed to a dual split rear exit, replacing the factory system from the catalytic converters back with a layout intended to improve exhaust flow and give the V8 a more noticeable voice than the subdued stock setup.\u003c\/p\u003e\n\u003cp\u003eAs part of MBRP's Street Series, this system targets a fuller, cleaner exhaust note with added low-end growl while staying civil enough for commuting and long highway stints. Resonators are built into the system to reduce rasp, and MBRP describes it as free of drone and well short of race-level volume. It suits daily-driven GTs, weekend cars, and mild bolt-on builds where the goal is better tone and flow on a budget that does not stretch to stainless steel.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStreet Series tuning for a balanced sound with added low-end growl, described by MBRP as without drone or race-level loudness\u003c\/li\u003e\n\u003cli\u003eIntegrated resonators that reduce rasp while keeping the V8 growl\u003c\/li\u003e\n\u003cli\u003eFull 3-inch mandrel-bent tubing to improve flow and reduce backpressure\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction, described as durable, heat-tolerant, and cost-effective\u003c\/li\u003e\n\u003cli\u003eDual split rear exit with factory-style symmetry\u003c\/li\u003e\n\u003cli\u003ePre-bent, non-adjustable design tuned for fit and performance\u003c\/li\u003e\n\u003cli\u003eDescribed by MBRP as lighter than the factory exhaust thanks to a simpler, less restrictive layout\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation using the OEM hangers\u003c\/li\u003e\n\u003cli\u003eMBRP part number S7251AL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAluminized Steel, 3-Inch Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds the S7251AL from aluminized steel, a material the manufacturer selects for its durability and heat tolerance while keeping cost down for daily-driven cars. It is a practical choice for owners who want a functional upgrade without paying for stainless steel.\u003c\/p\u003e\u003cp\u003eAll of the piping is mandrel-bent at a 3-inch diameter, which keeps the tube cross-section consistent through each bend. The system arrives pre-bent with no adjustability, as MBRP has set the routing for proper fit and performance on the Mustang GT.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Street Series voicing is meant to deepen and clean up the exhaust note so the Coyote V8 is clearly heard, without becoming tiresome on long drives or daily commutes. Resonators take the edge off the rasp while leaving the growl intact. Owners after maximum volume are directed by MBRP to its Race Series instead.\u003c\/p\u003e\u003cp\u003eAccording to MBRP, the 3-inch mandrel-bent tubing improves flow and lowers backpressure, contributing to sharper throttle response and better overall drivability. The simplified, less restrictive layout is also stated to weigh less than the factory exhaust. At the rear, the dual split exit gives the car a more aggressive look while keeping a symmetrical, factory-style arrangement.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts on directly using the factory exhaust hangers; cutting and welding are not required\u003c\/li\u003e\n\u003cli\u003eA tune or ECU reflash is not necessary after installation\u003c\/li\u003e\n\u003cli\u003eRequires no extra electronics such as sensors or control modules\u003c\/li\u003e\n\u003cli\u003eMBRP states that all hardware needed for installation is included\u003c\/li\u003e\n\u003cli\u003eProfessional installation is advised if you lack a lift or the proper tools\u003c\/li\u003e\n\u003cli\u003eNot compatible with factory active exhaust; the system has no provisions for exhaust valves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives the 5.0L V8 a fuller, more present exhaust note than the muted factory system\u003c\/li\u003e\n\u003cli\u003eStreet Series tuning with resonators keeps the sound manageable for daily driving and road trips\u003c\/li\u003e\n\u003cli\u003e3-inch mandrel-bent tubing is designed to improve flow and reduce backpressure\u003c\/li\u003e\n\u003cli\u003eAluminized steel offers a durable, cost-conscious alternative to stainless steel systems\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with OEM hangers and no tuning requirement keeps the upgrade straightforward\u003c\/li\u003e\n\u003cli\u003eDual split rear exit adds a more aggressive rear appearance with symmetrical styling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2026 Ford Mustang GT \/ Dark Horse \/ EcoBoost\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT \/ Dark Horse \/ EcoBoost (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with EcoBoost or Dark Horse trims\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHardware required for installation\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eProvisions for factory active exhaust valves\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305998905529,"sku":"MBRPS7251AL","price":714.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_9cc0f030-7ba9-468f-92c4-4eecde799591.webp?v=1794435568","url":"https:\/\/engmustangs.com\/products\/mbrp-aluminized-steel-3-street-cat-back-exhaust-w-dual-split-rear-2024-2026-mustang-gt-s7251al","provider":"ENG Mustangs","version":"1.0","type":"link"}