{"product_id":"mbrp-aluminized-steel-3-race-cat-back-exhaust-w-dual-split-rear-2024-2026-mustang-gt-s7253al","title":"MBRP Aluminized Steel 3\" Race Cat-Back Exhaust w\/ Dual Split Rear (2024-2026 Mustang GT) – S7253AL","description":"\u003cp\u003eThe MBRP S7253AL is a Race Series cat-back exhaust for the S650 Mustang GT with the 5.0L Coyote V8. It uses full 3-inch mandrel-bent aluminized steel tubing in a straight-through, resonator-free layout and finishes in a dual split rear exit. MBRP built it for owners who care more about volume, an unfiltered V8 note, and freer exhaust flow than about a subdued cabin.\u003c\/p\u003e\n\u003cp\u003eCompared with the factory system, MBRP says this cat-back reduces backpressure, sharpens throttle response, and gives the Coyote a much more aggressive voice. Aluminized steel keeps the cost of a race-style system below that of T304 stainless, which makes the S7253AL a practical choice for a bolt-on build where sound and flow matter more than a show finish. It is a fixed, non-valved design and bolts in at the factory hanger locations without a tune.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number S7253AL from MBRP's Race Series\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction\u003c\/li\u003e\n\u003cli\u003eFull 3-inch mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eStraight-through design with no resonators; factory resonators are eliminated\u003c\/li\u003e\n\u003cli\u003eDual split rear exit layout\u003c\/li\u003e\n\u003cli\u003eFixed configuration with no adjustability, set up for maximum flow and tone\u003c\/li\u003e\n\u003cli\u003eNo exhaust valves; not designed to integrate with factory active exhaust\u003c\/li\u003e\n\u003cli\u003eLighter than the factory exhaust, according to MBRP\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on at factory hanger locations with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eNo tuning or ECU recalibration required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAluminized Steel, 3-Inch Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds the S7253AL from aluminized steel, a material chosen to handle exhaust heat and hard use while costing less than stainless. The trade-off is finish. MBRP positions this version for owners who prioritize sound and flow over a show-car appearance, and it offers T304 stainless systems for buyers who want that material.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel-bent at a full 3-inch diameter, so the pipe keeps its cross-section through each bend. According to MBRP, the system weighs less than the factory exhaust because the pipe walls are thinner and there is less internal baffling.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAs a Race Series system, the S7253AL drops the factory resonators and uses a straight-through path, which MBRP says delivers maximum volume and a raw V8 tone from the 5.0L. It is intended to be loud. Drivers who want a quieter setup for daily use should look at MBRP's other cat-back options for this platform.\u003c\/p\u003e\u003cp\u003eMBRP states that the 3-inch mandrel-bent tubing improves flow and power delivery across the rev range. Compared with stock, the company cites significantly lower backpressure and better throttle response. The dual split rear exit gives the back of the car a more aggressive look as part of a functional layout.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on that uses the factory hanger locations\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli\u003eNo tuning or ECU recalibration needed\u003c\/li\u003e\n\u003cli\u003eNo additional hardware, modules, or sensors required, according to MBRP\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended if you do not have a lift or the proper tools\u003c\/li\u003e\n\u003cli\u003eIf you are pairing the system with aftermarket headers or mid-pipes, confirm flange diameter and location before installing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the subdued factory exhaust with a resonator-free, straight-through system for a louder, more aggressive Coyote V8 note\u003c\/li\u003e\n\u003cli\u003eFull 3-inch mandrel-bent tubing for improved flow and reduced backpressure compared with stock\u003c\/li\u003e\n\u003cli\u003eAluminized steel gives you race-style construction without paying for stainless\u003c\/li\u003e\n\u003cli\u003eBolts in at the factory hanger locations with no cutting, welding, or tuning\u003c\/li\u003e\n\u003cli\u003eWeighs less than the factory exhaust, according to MBRP\u003c\/li\u003e\n\u003cli\u003eA logical step in a full bolt-on build where sound and flow come first\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not fit EcoBoost or Dark Horse models\u003c\/li\u003e\n\u003cli\u003eNot compatible with factory active exhaust setups—this is a race exhaust with no valve integration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305833164985,"sku":"MBRPS7253AL","price":714.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_e21c80e9-2022-4dd4-a073-32b5529abe20.webp?v=1794435557","url":"https:\/\/engmustangs.com\/products\/mbrp-aluminized-steel-3-race-cat-back-exhaust-w-dual-split-rear-2024-2026-mustang-gt-s7253al","provider":"ENG Mustangs","version":"1.0","type":"link"}