The MBRP S7253AL is a Race Series cat-back exhaust for the S650 Mustang GT with the 5.0L Coyote V8. It uses full 3-inch mandrel-bent aluminized steel tubing in a straight-through, resonator-free layout and finishes in a dual split rear exit. MBRP built it for owners who care more about volume, an unfiltered V8 note, and freer exhaust flow than about a subdued cabin.
Compared with the factory system, MBRP says this cat-back reduces backpressure, sharpens throttle response, and gives the Coyote a much more aggressive voice. Aluminized steel keeps the cost of a race-style system below that of T304 stainless, which makes the S7253AL a practical choice for a bolt-on build where sound and flow matter more than a show finish. It is a fixed, non-valved design and bolts in at the factory hanger locations without a tune.
Key Features
- Part number S7253AL from MBRP's Race Series
- Aluminized steel construction
- Full 3-inch mandrel-bent tubing
- Straight-through design with no resonators; factory resonators are eliminated
- Dual split rear exit layout
- Fixed configuration with no adjustability, set up for maximum flow and tone
- No exhaust valves; not designed to integrate with factory active exhaust
- Lighter than the factory exhaust, according to MBRP
- Direct bolt-on at factory hanger locations with no cutting or welding
- No tuning or ECU recalibration required
Aluminized Steel, 3-Inch Mandrel-Bent Construction
MBRP builds the S7253AL from aluminized steel, a material chosen to handle exhaust heat and hard use while costing less than stainless. The trade-off is finish. MBRP positions this version for owners who prioritize sound and flow over a show-car appearance, and it offers T304 stainless systems for buyers who want that material.
The tubing is mandrel-bent at a full 3-inch diameter, so the pipe keeps its cross-section through each bend. According to MBRP, the system weighs less than the factory exhaust because the pipe walls are thinner and there is less internal baffling.
Performance and Benefits
As a Race Series system, the S7253AL drops the factory resonators and uses a straight-through path, which MBRP says delivers maximum volume and a raw V8 tone from the 5.0L. It is intended to be loud. Drivers who want a quieter setup for daily use should look at MBRP's other cat-back options for this platform.
MBRP states that the 3-inch mandrel-bent tubing improves flow and power delivery across the rev range. Compared with stock, the company cites significantly lower backpressure and better throttle response. The dual split rear exit gives the back of the car a more aggressive look as part of a functional layout.
Installation
- Direct bolt-on that uses the factory hanger locations
- No cutting or welding required
- No tuning or ECU recalibration needed
- No additional hardware, modules, or sensors required, according to MBRP
- Professional installation is recommended if you do not have a lift or the proper tools
- If you are pairing the system with aftermarket headers or mid-pipes, confirm flange diameter and location before installing
Why You Need This
- Replaces the subdued factory exhaust with a resonator-free, straight-through system for a louder, more aggressive Coyote V8 note
- Full 3-inch mandrel-bent tubing for improved flow and reduced backpressure compared with stock
- Aluminized steel gives you race-style construction without paying for stainless
- Bolts in at the factory hanger locations with no cutting, welding, or tuning
- Weighs less than the factory exhaust, according to MBRP
- A logical step in a full bolt-on build where sound and flow come first
Vehicle Fitment
- 2026 Ford Mustang GT (5.0L)
Fitment notes:
- Does not fit EcoBoost or Dark Horse models
- Not compatible with factory active exhaust setups—this is a race exhaust with no valve integration