The MBRP S72803CF is a 3-inch Street Series cat-back exhaust for the S650 Mustang GT with the 5.0L Coyote V8. It is built from T304 stainless steel piping and finished with four real carbon fiber tip sleeves. The system replaces the factory exhaust from the catalytic converters back, with the goal of a deeper, cleaner tone than stock and improved exhaust flow through 3-inch mandrel-bent tubing.
Because it belongs to MBRP's Street Series, the system uses resonators to refine the exhaust note and help manage drone, so the V8 can sound aggressive under throttle while staying livable on daily drives and longer trips. It is aimed at GT and GT Premium owners who want a quad-tip rear appearance, stainless durability for year-round street use, and a moderate volume increase without needing an ECU tune.
Key Features
- MBRP Street Series cat-back exhaust, part number S72803CF
- 3-inch mandrel-bent tubing intended to improve exhaust flow and reduce backpressure
- T304 stainless steel piping for corrosion and heat resistance
- Quad exit layout with four real carbon fiber tip sleeves
- Resonator-equipped to smooth the tone and keep drone under control
- Described by MBRP as lighter than the OEM system due to its high-flow layout and fewer internal baffles
- Fixed, non-adjustable pipe routing designed to fit a quad-tip rear valance
- Straight-through design with no valve control
- No ECU tuning or reprogramming required
T304 Stainless Steel Construction with Carbon Fiber Tips
The piping is made from T304 stainless steel, chosen for its resistance to corrosion and heat. That makes the system suitable for all-season street use, including in regions where road salt and moisture would shorten the life of lesser materials.
The tubing is 3-inch diameter and mandrel-bent, so it keeps a consistent diameter through the bends. The system finishes in four tips with genuine carbon fiber sleeves. Pipe routing is fixed and engineered specifically to line up with a quad-tip rear valance.
Performance and Benefits
As a Street Series system, the S72803CF uses resonators to produce a note that is deeper and more refined than the factory exhaust. The goal is to keep the sound aggressive under throttle while holding drone in check during daily driving and road trips. It is louder and more pronounced than stock without reaching race-system volume.
The 3-inch mandrel-bent tubing is designed to improve flow and reduce backpressure, which MBRP associates with sharper throttle response. The manufacturer also states the system is lighter than the OEM exhaust thanks to its high-flow layout and fewer internal baffles. The design is straight-through with no valve control, so it does not work with the factory active exhaust system.
Installation
- Direct bolt-on fit for vehicles equipped with a quad-tip rear valance
- Vehicles that came from the factory with dual tips will need a quad-tip rear valance; confirm valance compatibility or plan for a valance upgrade before installing
- No ECU tuning or reprogramming required
- Does not integrate with factory active exhaust systems; the system has no valve control
- Professional installation is recommended to get precise quad-tip alignment and proper sealing
Why You Need This
- Gives a deeper, more refined exhaust note than stock while the resonators keep drone manageable for daily use
- T304 stainless steel construction is built for long-term durability and all-season driving
- 3-inch mandrel-bent tubing is designed to improve flow and reduce backpressure
- Quad real carbon fiber tips give the rear of the car a distinctive finished look
- Installs without an ECU tune
Vehicle Fitment
- 2026 Ford Mustang GT / Dark Horse / EcoBoost
- 2026 Ford Mustang GT / Dark Horse / EcoBoost (5.0L)
Fitment notes:
- Not compatible with EcoBoost or Dark Horse variants