{"product_id":"mbrp-3-street-cat-back-exhaust-dual-rear-exit-w-quad-black-tips-2024-2026-mustang-gt-gt-premium-s7280blk","title":"MBRP 3\" Street Cat-Back Exhaust – Dual Rear Exit w\/ Quad Black Tips (2024-2026 Mustang GT \/ GT Premium) – S7280BLK","description":"\u003cp\u003eThe MBRP S7280BLK is a 3-inch cat-back exhaust from MBRP's Street Series, built for the S650-generation Mustang GT with the 5.0L Coyote V8. It pairs mandrel-bent aluminized steel tubing with resonators and finishes at four 4-inch stainless steel tips with a black ceramic coating, giving the rear of the car a quad-exit look with no polished metal.\u003c\/p\u003e\n\u003cp\u003eThe system is aimed at owners who drive their GT daily but want more tone and volume than the factory exhaust gives. MBRP describes the sound as deep and mellow at cruise and more aggressive under load, with resonators to control harshness and drone. It bolts in without ECU tuning or recalibration, which suits cars running stock manifolds or a mild set of bolt-ons.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch mandrel-bent piping intended to improve flow, reduce backpressure, and sharpen throttle response\u003c\/li\u003e\n\u003cli\u003eAluminized steel tubing construction\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch tips made of stainless steel with a black ceramic coating\u003c\/li\u003e\n\u003cli\u003eStreet Series tuning with resonators, voiced deep and mellow at cruise and more aggressive under load, without harsh drone according to MBRP\u003c\/li\u003e\n\u003cli\u003eStraight-through design that MBRP states is lighter than the factory system\u003c\/li\u003e\n\u003cli\u003eFixed layout designed to work with a quad-exit rear valance\u003c\/li\u003e\n\u003cli\u003eNo ECU tuning or recalibration required\u003c\/li\u003e\n\u003cli\u003eNo valve controls and no active exhaust function\u003c\/li\u003e\n\u003cli\u003ePart number S7280BLK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAluminized Steel Tubing with Ceramic-Coated Stainless Tips\u003c\/h3\u003e\u003cp\u003eMBRP builds the S7280BLK's tubing from aluminized steel, a durable, lower-cost material suited to builds where stainless steel tubing is not a priority. The 3-inch piping is mandrel bent, so the tube keeps its full diameter through each bend instead of narrowing where it turns.\u003c\/p\u003e\u003cp\u003eThe four 4-inch tips are stainless steel finished with a black ceramic coating. MBRP says the finish is meant to hold its color rather than fade, giving the car a darker look at the rear bumper. The layout is fixed and not adjustable, and it is designed to line up with a quad-exit rear valance.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Street Series is tuned for daily use. Resonators take the edge off the 5.0L's exhaust note, so the car stays relatively calm at highway cruise. Under throttle the system brings out more low-end rumble and growl. MBRP's stated goal is a sound that does not become tiresome on longer freeway drives.\u003c\/p\u003e\u003cp\u003eThe 3-inch mandrel-bent tubing is intended to reduce backpressure and improve throttle response compared with the factory exhaust. MBRP also says the straight-through, less restrictive design weighs less than the stock system, though it does not give a weight figure.\u003c\/p\u003e\u003cp\u003eThis system does not include valve controls, so there is no active exhaust function after installation.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on for cars already equipped with a quad-exit rear valance\u003c\/li\u003e\n\u003cli\u003eCars with the factory dual-exit setup need a quad-tip rear valance installed before this system will fit\u003c\/li\u003e\n\u003cli\u003eNo ECU tuning or recalibration is needed\u003c\/li\u003e\n\u003cli\u003eMBRP recommends professional installation to get correct tip alignment and fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds more tone and volume than the factory exhaust while staying suitable for daily driving and highway use\u003c\/li\u003e\n\u003cli\u003eResonators help control harshness and drone on long drives\u003c\/li\u003e\n\u003cli\u003eBlack ceramic-coated quad 4-inch tips give a darker look than polished tips\u003c\/li\u003e\n\u003cli\u003e3-inch mandrel-bent tubing reduces backpressure compared with the stock system\u003c\/li\u003e\n\u003cli\u003eWorks with a stock tune, with no ECU recalibration required\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction offers durability at a lower cost than stainless tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT \/ Dark Horse \/ EcoBoost (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with EcoBoost or Dark Horse trims\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68306068504761,"sku":"MBRPS7280BLK","price":1134.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_bc078c78-03d3-41dc-8835-db3d2fbeb864.webp?v=1794435577","url":"https:\/\/engmustangs.com\/products\/mbrp-3-street-cat-back-exhaust-dual-rear-exit-w-quad-black-tips-2024-2026-mustang-gt-gt-premium-s7280blk","provider":"ENG Mustangs","version":"1.0","type":"link"}