{"product_id":"mbrp-2015-2021-mustang-2-3l-ecoboost-aluminized-street-series-cat-back-black-tips-s7274blk","title":"MBRP  2015-2021 Mustang 2.3L Ecoboost Aluminized Street Series Cat-Back (Black Tips) - S7274BLK","description":"\u003cp\u003eThe MBRP Street Series cat-back exhaust, part number S7274BLK, is built for the 2015-2021 Ford Mustang with the 2.3L EcoBoost engine. It replaces the factory exhaust from the catalytic converters back with an aluminized system finished with black tips. It uses fully mandrel-bent tubing, minimal bend angles, and a muffler designed specifically for this vehicle to move exhaust out of the engine efficiently.\u003c\/p\u003e\n\u003cp\u003eMBRP developed its muscle car systems on its in-house Mustang 1100 AWD-SE chassis dynamometer and refined them through road and track miles. The result is a bolt-on cat-back meant to give the EcoBoost Mustang a tuned exhaust note and a stronger visual presence. MBRP also positions it as a solid base for other modifications such as cold air intakes, programmers, modules, and downloaders.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAluminized cat-back exhaust system for the 2.3L EcoBoost Mustang\u003c\/li\u003e\n\u003cli\u003eBlack tips with the MBRP logo stamped on the tip\u003c\/li\u003e\n\u003cli\u003eFully mandrel-bent tubing with minimal bend degree angles\u003c\/li\u003e\n\u003cli\u003eVehicle-specific muffler design\u003c\/li\u003e\n\u003cli\u003eFully sealed seams intended to resist rust\u003c\/li\u003e\n\u003cli\u003eBlack coating formulated to withstand extreme heat and abrasive conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested on an in-house Mustang 1100 AWD-SE chassis dynamometer plus road and track testing\u003c\/li\u003e\n\u003cli\u003eBolt-on, no-weld design that mounts directly to the OEM hangers\u003c\/li\u003e\n\u003cli\u003eSound tuned to stay civilized during normal driving and turn aggressive when pushed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAluminized Construction with Sealed Seams and Black Coated Finish\u003c\/h3\u003e\u003cp\u003eAccording to the product title, this Street Series system is built from aluminized steel. MBRP fully seals the seams to help keep rust from taking hold, which matters on a component that sees moisture, road debris, and constant heat cycling underneath the car.\u003c\/p\u003e\u003cp\u003eThe black finish is a coating developed specifically for exhaust duty, formulated to handle high temperatures and abrasive conditions without breaking down. MBRP states that each system is built to strict manufacturing standards, and the tubing is fully mandrel bent to keep the inside diameter consistent through each bend.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMBRP designed this system to increase exhaust flow and lower exhaust temperatures. The combination of mandrel-bent tubing, minimal bend angles, and a muffler designed for this specific application is intended to get exhaust gases out quickly. MBRP refined the design through extensive time on its chassis dynamometer along with road and track testing.\u003c\/p\u003e\u003cp\u003eFor owners planning further upgrades, MBRP describes its cat-back as a starting point for getting more out of cold air intakes, programmers, modules, and downloaders.\u003c\/p\u003e\u003cp\u003eOn sound, MBRP tuned the system to stay civilized when you need it to be, while delivering a more aggressive muscle car tone under heavier throttle. The black tips with the stamped MBRP logo add a darker, blacked-out look to the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on design with no welding required\u003c\/li\u003e\n\u003cli\u003eMBRP estimates installation at roughly one and a half to two hours\u003c\/li\u003e\n\u003cli\u003eMounts directly to the factory OEM hangers\u003c\/li\u003e\n\u003cli\u003eClamps and installation parts are supplied together in one box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory cat-back on a 2015-2021 Mustang 2.3L EcoBoost with a mandrel-bent system built for that application\u003c\/li\u003e\n\u003cli\u003eGives the EcoBoost a tuned exhaust note that stays manageable for daily driving\u003c\/li\u003e\n\u003cli\u003eBlack tips and stamped MBRP logo provide a blacked-out rear appearance\u003c\/li\u003e\n\u003cli\u003eSealed seams and a heat-resistant black coating are aimed at long-term durability\u003c\/li\u003e\n\u003cli\u003eBolt-on, no-weld fit to the OEM hangers keeps the job within reach of a home garage\u003c\/li\u003e\n\u003cli\u003eProvides a foundation for future intake and tuning upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2021 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eClamps and parts needed for installation, packaged in one box\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305988714681,"sku":"MBRPS7274BLK","price":869.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_fc20b493-f9c8-43f8-8501-8da5af2b57ae.webp?v=1794435558","url":"https:\/\/engmustangs.com\/products\/mbrp-2015-2021-mustang-2-3l-ecoboost-aluminized-street-series-cat-back-black-tips-s7274blk","provider":"ENG Mustangs","version":"1.0","type":"link"}