{"product_id":"mbrp-2-5in-axle-back-dual-rear-exit-quad-tips-al-2026-mustang-gt-mustang-gt-premium-s7281al","title":"MBRP 2.5In Axle-Back Dual Rear Exit Quad Tips. Al (2026 Mustang GT, Mustang GT Premium) - S7281AL","description":"\u003cp\u003eThe MBRP S7281AL is an axle-back exhaust from the company's Armor Lite Series for the 2026 Mustang GT. It uses 2.5-inch heavy-gauge aluminized steel tubing, mandrel bent throughout, and finishes in a dual rear exit layout with quad tips. The design replaces the factory exhaust valves and includes brackets for the valve actuators. MBRP describes the result as an aggressive exhaust tone with a traditional muscle car character.\u003c\/p\u003e\n\u003cp\u003eMBRP positions Armor Lite as its value line. According to the manufacturer, it keeps the same fitment, performance, and sound as MBRP's premium systems, with aluminized steel used in place of more costly materials. It suits owners of the new S650-generation GT who want a deeper, more assertive rear-exit sound from a recognized exhaust brand on a tighter budget. It also makes particular sense for drivers in dry climates, where aluminized steel holds up well.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eArmor Lite Series axle-back exhaust, MBRP part number S7281AL\u003c\/li\u003e\n\u003cli\u003e2.5-inch tubing diameter\u003c\/li\u003e\n\u003cli\u003eHeavy-gauge aluminized steel construction\u003c\/li\u003e\n\u003cli\u003eFully mandrel bent tubing with no rippling in the bends\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration with quad tips\u003c\/li\u003e\n\u003cli\u003eValve delete design\u003c\/li\u003e\n\u003cli\u003eValve actuator brackets included\u003c\/li\u003e\n\u003cli\u003eVehicle-specific muffler design with minimal bend angles, per MBRP\u003c\/li\u003e\n\u003cli\u003eMBRP logo stamped on the tips\u003c\/li\u003e\n\u003cli\u003eDeveloped on MBRP's in-house Mustang 1100 AWD-SE chassis dynamometer and tested on road and track\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHeavy-Gauge Aluminized Steel Construction\u003c\/h3\u003e\u003cp\u003eThe S7281AL is built from heavy-gauge aluminized steel tubing. The thicker wall helps it resist the dings and dents that road debris can cause underneath the car. MBRP recommends aluminized steel especially for drivers in dry regions with little precipitation, where corrosion exposure is lower.\u003c\/p\u003e\u003cp\u003eEvery section of tubing is mandrel bent. This process keeps the full internal diameter through each bend and avoids the rippling and wall collapse that crush bending can produce. MBRP pairs the bends with minimal bend angles and a muffler designed for this specific vehicle.\u003c\/p\u003e\u003cp\u003eMBRP reports that the system was refined over extended sessions on its in-house Mustang 1100 AWD-SE chassis dynamometer. It was also driven for hundreds of miles on road and track, with design revisions made along the way.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMBRP describes the sound as aggressive, aiming for a real muscle car tone. The company says each of its systems is specifically tuned for the vehicle it fits. The valve delete design removes the factory valve function from the axle-back section, and MBRP supplies brackets for the valve actuators.\u003c\/p\u003e\u003cp\u003eThe smooth mandrel-bent tubing is intended to move exhaust gas out quickly with minimal restriction. MBRP states that better exhaust flow lets more fresh air into the cylinders, supporting power, performance, and engine longevity. The company does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\u003cp\u003eMBRP also presents its exhaust systems as a foundation for other bolt-on upgrades, including cold air intakes, programmers, and tuning modules.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelivers a more aggressive, muscle car exhaust tone than the factory system on the 2026 Mustang GT\u003c\/li\u003e\n\u003cli\u003eUses MBRP's value-oriented Armor Lite construction while, per the manufacturer, matching the fitment, performance, and sound of its premium lines\u003c\/li\u003e\n\u003cli\u003eHeavy-gauge aluminized steel resists damage from road debris and is well suited to dry climates\u003c\/li\u003e\n\u003cli\u003eFully mandrel-bent 2.5-inch tubing maintains consistent flow through every bend\u003c\/li\u003e\n\u003cli\u003eDual rear exit with quad tips and stamped MBRP logos gives a finished look at the rear of the car\u003c\/li\u003e\n\u003cli\u003eCan serve as a starting point for additional bolt-on modifications such as intakes and tuners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eValve actuator brackets\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305817108665,"sku":"MBRPS7281AL","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_7188c283-75ab-4ec0-a2ab-d0b60e7ca52b.webp?v=1794435552","url":"https:\/\/engmustangs.com\/products\/mbrp-2-5in-axle-back-dual-rear-exit-quad-tips-al-2026-mustang-gt-mustang-gt-premium-s7281al","provider":"ENG Mustangs","version":"1.0","type":"link"}