{"product_id":"magnaflow-sys-competition-a-b-2018-ford-mustang-5-0l","title":"MagnaFlow SYS Competition A\/B 2018 Ford Mustang 5.0L","description":"\u003cp\u003eThe MagnaFlow Competition Series Axle-Back Performance Exhaust System, part number 19418, is a stainless steel axle-back for the 5.0L Ford Mustang. It takes over the exhaust path from roughly the rear axle rearward and uses 3-inch mandrel-bent main tubing feeding two straight-through mufflers. The system finishes in a split rear exit with four 4-inch polished tips. MagnaFlow positions this Competition Series setup as the more aggressive take on its familiar deep, resonant tone.\u003c\/p\u003e\n\u003cp\u003eFor owners of 2018-2023 5.0L Mustangs who want noticeably more exhaust presence without replacing the full system, this kit offers a direct-fit layout developed with 3D scanning. It is built entirely from stainless steel using CNC robotic manufacturing and carries MagnaFlow's limited lifetime warranty. MagnaFlow describes the system's performance as dyno-proven and rates its sound as Aggressive outside the car and Moderate inside the cabin, which suits drivers looking for a competition-focused character.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMagnaFlow Competition Series axle-back exhaust, part number 19418\u003c\/li\u003e\n\u003cli\u003eAxle-back layout that replaces the exhaust from near the rear axle back\u003c\/li\u003e\n\u003cli\u003e3-inch main piping, mandrel bent for smooth flow\u003c\/li\u003e\n\u003cli\u003eTwo straight-through mufflers\u003c\/li\u003e\n\u003cli\u003eSplit rear exit with four tips\u003c\/li\u003e\n\u003cli\u003e4-inch tips: welded on, double-wall, angle-cut, with a folded edge and polished finish\u003c\/li\u003e\n\u003cli\u003eMagnaFlow sound rating: Aggressive exterior, Moderate interior\u003c\/li\u003e\n\u003cli\u003eDirect-fit design developed using 3D scanning\u003c\/li\u003e\n\u003cli\u003eConstructed from 100% stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eProduced with CNC precision robotic manufacturing\u003c\/li\u003e\n\u003cli\u003eBacked by the MagnaFlow limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAll-Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eEvery component of the 19418 system is made from stainless steel, a material MagnaFlow selects for its durability and resistance to corrosion. That matters on an axle-back, which sits at the rear of the car and sees road spray, moisture, and heat cycling.\u003c\/p\u003e\u003cp\u003eMagnaFlow builds the system with CNC-controlled robotic manufacturing for precise, repeatable fabrication. The fitment geometry was developed with 3D scanning so the system lines up as a direct fit. The 4-inch tips are welded to the system rather than clamped, and they use double-wall construction with an angle-cut, folded-edge profile and a polished finish.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe 3-inch main tubing is mandrel bent, keeping the pipe diameter consistent through the bends to support exhaust flow. It routes into a pair of straight-through mufflers, a design MagnaFlow uses for its free-flowing character, and MagnaFlow describes the result as dyno-proven performance.\u003c\/p\u003e\u003cp\u003eOn sound, this Competition Series system builds on MagnaFlow's deep, resonant signature and adds a sharper, more aggressive edge. MagnaFlow rates it Aggressive for exterior volume and Moderate for interior volume, reflecting its competition-oriented tuning. Buyers should confirm the system complies with local noise regulations before installing.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit design developed with 3D scanning for accurate fitment\u003c\/li\u003e\n\u003cli\u003eReplaces the factory exhaust from near the rear axle rearward\u003c\/li\u003e\n\u003cli\u003eMagnaFlow provides installation instructions for this system\u003c\/li\u003e\n\u003cli\u003eCheck local noise regulations to confirm compliance before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a more aggressive exhaust tone than MagnaFlow's standard deep, resonant sound while keeping interior volume rated Moderate\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 3-inch tubing and straight-through mufflers are designed for efficient exhaust flow\u003c\/li\u003e\n\u003cli\u003eAll-stainless construction resists corrosion for long-term use\u003c\/li\u003e\n\u003cli\u003eDirect-fit axle-back format avoids replacing the full exhaust system\u003c\/li\u003e\n\u003cli\u003eFour 4-inch polished, double-wall tips give the rear of the car a finished look\u003c\/li\u003e\n\u003cli\u003eCovered by MagnaFlow's limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMagnaFlow limited lifetime warranty\u003c\/p\u003e","brand":"MagnaFlow","offers":[{"title":"Default Title","offer_id":68306241093817,"sku":"MAG19418","price":1668.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/35bd63c4b0c9611face9f4304f756003L.jpg?v=1794436173","url":"https:\/\/engmustangs.com\/products\/magnaflow-sys-competition-a-b-2018-ford-mustang-5-0l","provider":"ENG Mustangs","version":"1.0","type":"link"}