{"product_id":"magnaflow-competition-series-cat-back-performance-exhaust-system-quad-black-tips-2026-mustang-gt","title":"MagnaFlow Competition Series Cat-Back Performance Exhaust System (Quad Black Tips) – 2026 Mustang GT","description":"\u003cp\u003eThe MagnaFlow Competition Series Cat-Back Performance Exhaust System, part number 19643, replaces the factory exhaust from the catalytic converters rearward on the 2026 Mustang GT fastback. It is built from 409 stainless steel with mandrel-bent tubing and a straight-through layout, and it finishes with four 4.5-inch black-coated tips. MagnaFlow developed it to give the Coyote V8 a louder, more aggressive voice than the stock system while staying composed at highway cruise.\u003c\/p\u003e\n\u003cp\u003eThis system suits S650 GT owners who want a stronger exhaust note and less restriction without fabrication or a header swap. It installs as a direct bolt-on with no cutting or welding, needs no tuning or added sensors, and is intended for stock or mildly modified cars. MagnaFlow designs it as a fixed, non-adjustable system tuned for a deep tone under load while keeping highway drone in check.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMagnaFlow Competition Series cat-back, part number 19643\u003c\/li\u003e\n\u003cli\u003e409 stainless steel construction for corrosion resistance and thermal stability\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing designed to reduce backpressure and raise exhaust gas velocity\u003c\/li\u003e\n\u003cli\u003eStraight-through design intended to improve flow across the powerband and sharpen throttle response\u003c\/li\u003e\n\u003cli\u003eQuad 4.5-inch black-coated tips sized to fill the rear bumper cutouts\u003c\/li\u003e\n\u003cli\u003eAggressive tone under load, engineered to avoid drone at highway speeds\u003c\/li\u003e\n\u003cli\u003eLighter than the factory suitcase muffler configuration\u003c\/li\u003e\n\u003cli\u003eFixed, non-adjustable design tuned for tone and performance\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on with no cutting or welding required\u003c\/li\u003e\n\u003cli\u003eNo tuning, reprogramming, electronics, or additional components needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e409 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eMagnaFlow builds the Competition Series 19643 from 409 stainless steel, chosen for its corrosion resistance and its stability under high exhaust temperatures. According to the manufacturer, the system is made to tolerate repeated hard pulls and heat cycling without flaking or developing leaks.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which maintains a consistent diameter through each bend rather than crimping it, supporting the system's goal of lower backpressure and better exhaust velocity. The four 4.5-inch tips carry a black coating for a subdued finish, and MagnaFlow states they fill the bumper openings without gaps or rattles.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe straight-through design and mandrel-bent tubing are intended to reduce restriction compared with the factory exhaust, with MagnaFlow citing improved throttle response and flow across the rev range. No specific horsepower or torque figures are stated by the manufacturer.\u003c\/p\u003e\u003cp\u003eOn sound, the system is tuned for a deep, growling note when the engine is under load, while MagnaFlow states it avoids the resonance that typically causes drone at highway speeds. The design is fixed and has no adjustable valving, so the tone is set by the system itself.\u003c\/p\u003e\u003cp\u003eReplacing the factory suitcase muffler configuration with this system also reduces weight, as MagnaFlow describes it as lighter than the stock setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on that attaches at the original hanger locations and follows the stock routing\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli\u003eNo tuning, reprogramming, or electronics needed\u003c\/li\u003e\n\u003cli\u003eNo supporting components or extra sensors required\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended to ensure proper tip alignment and clearance\u003c\/li\u003e\n\u003cli\u003eNot designed for use with long tube headers or aftermarket mid-pipes\u003c\/li\u003e\n\u003cli\u003eIntended to be installed as a complete cat-back system rather than as an axle-back-only swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelivers a noticeably more aggressive exhaust note than the factory system while being tuned to avoid highway drone\u003c\/li\u003e\n\u003cli\u003eMandrel-bent, straight-through layout reduces backpressure compared with stock\u003c\/li\u003e\n\u003cli\u003e409 stainless steel construction resists corrosion and holds up to high heat\u003c\/li\u003e\n\u003cli\u003eLighter than the factory suitcase muffler configuration\u003c\/li\u003e\n\u003cli\u003eBolts in without cutting, welding, tuning, or extra parts\u003c\/li\u003e\n\u003cli\u003eQuad 4.5-inch black-coated tips give the rear of the car a clean, darker finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT \/ Dark Horse, Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with convertibles or Dark Horse trims\u003c\/li\u003e\n\u003cli\u003eDoes not fit convertible or Dark Horse models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagnaFlow","offers":[{"title":"Default Title","offer_id":68306288738489,"sku":"MAG19643","price":3801.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/7d090288a9e93e04b26ea645e9589287.jpg?v=1794782275","url":"https:\/\/engmustangs.com\/products\/magnaflow-competition-series-cat-back-performance-exhaust-system-quad-black-tips-2026-mustang-gt","provider":"ENG Mustangs","version":"1.0","type":"link"}