MagnaFlow

MagnaFlow Competition Series Cat-Back Performance Exhaust System (Quad Black Tips) – 2026 Mustang GT

$3,801.00
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The MagnaFlow Competition Series Cat-Back Performance Exhaust System, part number 19643, replaces the factory exhaust from the catalytic converters rearward on the 2026 Mustang GT fastback. It is built from 409 stainless steel with mandrel-bent tubing and a straight-through layout, and it finishes with four 4.5-inch black-coated tips. MagnaFlow developed it to give the Coyote V8 a louder, more aggressive voice than the stock system while staying composed at highway cruise.

This system suits S650 GT owners who want a stronger exhaust note and less restriction without fabrication or a header swap. It installs as a direct bolt-on with no cutting or welding, needs no tuning or added sensors, and is intended for stock or mildly modified cars. MagnaFlow designs it as a fixed, non-adjustable system tuned for a deep tone under load while keeping highway drone in check.

Key Features

  • MagnaFlow Competition Series cat-back, part number 19643
  • 409 stainless steel construction for corrosion resistance and thermal stability
  • Mandrel-bent tubing designed to reduce backpressure and raise exhaust gas velocity
  • Straight-through design intended to improve flow across the powerband and sharpen throttle response
  • Quad 4.5-inch black-coated tips sized to fill the rear bumper cutouts
  • Aggressive tone under load, engineered to avoid drone at highway speeds
  • Lighter than the factory suitcase muffler configuration
  • Fixed, non-adjustable design tuned for tone and performance
  • Direct bolt-on with no cutting or welding required
  • No tuning, reprogramming, electronics, or additional components needed

409 Stainless Steel, Mandrel-Bent Construction

MagnaFlow builds the Competition Series 19643 from 409 stainless steel, chosen for its corrosion resistance and its stability under high exhaust temperatures. According to the manufacturer, the system is made to tolerate repeated hard pulls and heat cycling without flaking or developing leaks.

The tubing is mandrel bent, which maintains a consistent diameter through each bend rather than crimping it, supporting the system's goal of lower backpressure and better exhaust velocity. The four 4.5-inch tips carry a black coating for a subdued finish, and MagnaFlow states they fill the bumper openings without gaps or rattles.

Performance and Benefits

The straight-through design and mandrel-bent tubing are intended to reduce restriction compared with the factory exhaust, with MagnaFlow citing improved throttle response and flow across the rev range. No specific horsepower or torque figures are stated by the manufacturer.

On sound, the system is tuned for a deep, growling note when the engine is under load, while MagnaFlow states it avoids the resonance that typically causes drone at highway speeds. The design is fixed and has no adjustable valving, so the tone is set by the system itself.

Replacing the factory suitcase muffler configuration with this system also reduces weight, as MagnaFlow describes it as lighter than the stock setup.

Installation

  • Direct bolt-on that attaches at the original hanger locations and follows the stock routing
  • No cutting or welding required
  • No tuning, reprogramming, or electronics needed
  • No supporting components or extra sensors required
  • Professional installation recommended to ensure proper tip alignment and clearance
  • Not designed for use with long tube headers or aftermarket mid-pipes
  • Intended to be installed as a complete cat-back system rather than as an axle-back-only swap

Why You Need This

  • Delivers a noticeably more aggressive exhaust note than the factory system while being tuned to avoid highway drone
  • Mandrel-bent, straight-through layout reduces backpressure compared with stock
  • 409 stainless steel construction resists corrosion and holds up to high heat
  • Lighter than the factory suitcase muffler configuration
  • Bolts in without cutting, welding, tuning, or extra parts
  • Quad 4.5-inch black-coated tips give the rear of the car a clean, darker finish

Vehicle Fitment

  • 2026 Ford Mustang GT / Dark Horse, Fastback

Fitment notes:

  • Not compatible with convertibles or Dark Horse trims
  • Does not fit convertible or Dark Horse models
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.