{"product_id":"magnaflow-california-direct-fit-catalytic-converter-2015-2017-mustang-6561472","title":"MagnaFlow California Direct-Fit Catalytic Converter (2015-2017 Mustang) - 6561472","description":"\u003cp\u003eThe MagnaFlow 6561472 is a California Grade, CARB-compliant direct-fit catalytic converter built as a replacement unit for the 2015-2017 Ford Mustang. It follows the factory spun body layout and uses mandrel-bent stainless steel tubing, so it bolts in where the original converter was, with no cutting or welding needed. MagnaFlow designed it to keep the check engine light off and to match OEM-like flow behavior, which helps preserve stock performance and fuel economy.\u003c\/p\u003e\n\u003cp\u003eOwners in California and other states that follow CARB rules need a converter that is legal there, not just one that fits. MagnaFlow states this unit is engineered to meet or exceed California Air Resources Board requirements and has gone through extra testing under CARB guidelines, allowing it to be used legally on the listed vehicles in those regions. Gaskets and hardware come in the box, and the part is manufactured in the USA at MagnaFlow's Oceanside, California facility.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCalifornia Grade, CARB-compliant direct-fit replacement catalytic converter, MagnaFlow part number 6561472\u003c\/li\u003e\n\u003cli\u003eDesigned to meet or exceed California Air Resources Board requirements, with additional testing for legal use on listed vehicles in California and CARB-adopting states\u003c\/li\u003e\n\u003cli\u003e16 gauge 409 stainless steel tubing for corrosion resistance and long service life\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for unrestricted flow\u003c\/li\u003e\n\u003cli\u003eSpun body construction that mirrors the OE design\u003c\/li\u003e\n\u003cli\u003eSingle laser fusion weld on the spun body to reduce the chance of leaks\u003c\/li\u003e\n\u003cli\u003e308 stainless steel MIG welds\u003c\/li\u003e\n\u003cli\u003eCompact, low-mass design for improved thermal efficiency\u003c\/li\u003e\n\u003cli\u003eEngineered for OEM-like flow dynamics to retain factory performance and fuel efficiency\u003c\/li\u003e\n\u003cli\u003eDeveloped using 3D scanning by MagnaFlow's metrology department to match original equipment fit and function\u003c\/li\u003e\n\u003cli\u003eDirect-fit installation with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eGaskets and hardware included\u003c\/li\u003e\n\u003cli\u003eMade in the USA in Oceanside, California by an ISO-9001 certified manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 Gauge 409 Stainless Steel Spun Body Construction\u003c\/h3\u003e\u003cp\u003eMagnaFlow builds the 6561472 around 16 gauge 409 stainless steel tubing, a heavy-wall material chosen for its resistance to corrosion and its ability to hold up over a long service life underneath the car. The tubing is mandrel bent, which keeps the inside diameter consistent through each bend rather than pinching it.\u003c\/p\u003e\u003cp\u003eThe converter body copies the original equipment spun body design. On this housing, MagnaFlow uses a single laser fusion weld, which cuts down on the number of seams that could eventually leak. Other joints are made with 308 stainless steel MIG welds. The low-mass, compact housing also helps the converter manage heat more efficiently.\u003c\/p\u003e\u003cp\u003eDuring development, MagnaFlow's metrology department used current 3D scanning equipment to capture the factory part, with the aim of delivering a replacement that installs and works like the original. The unit is produced at MagnaFlow's Oceanside, California plant, and the company holds ISO-9001 certification.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThis is an emissions replacement part, not a power-adder. MagnaFlow engineered the converter to reproduce OEM-like flow characteristics so the engine keeps its factory performance and fuel efficiency, while the mandrel-bent tubing avoids unnecessary restriction through the bends.\u003c\/p\u003e\u003cp\u003eA primary goal of the design is keeping the check engine light from illuminating after the swap. The compact, low-mass construction supports better thermal efficiency, and the CARB compliance testing means the unit can be run legally on the listed vehicles where California emissions standards apply.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit design intended to replace the factory converter in its original location\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli\u003eCan be installed by the owner with the proper tools\u003c\/li\u003e\n\u003cli\u003eNecessary gaskets and hardware are supplied in the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou need a replacement catalytic converter for a 2015-2017 Mustang that is legal to run in California or a state that adopts CARB standards\u003c\/li\u003e\n\u003cli\u003eYou want to keep the check engine light off after replacing the converter\u003c\/li\u003e\n\u003cli\u003eYou prefer a bolt-in part that installs without cutting or welding\u003c\/li\u003e\n\u003cli\u003eYou want 16 gauge 409 stainless steel tubing for corrosion resistance and longevity\u003c\/li\u003e\n\u003cli\u003eYou want to retain factory performance and fuel efficiency with OEM-like flow\u003c\/li\u003e\n\u003cli\u003eYou want gaskets and hardware supplied so the job can be completed with what is in the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2015-2017 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMagnaFlow 6561472 California Grade direct-fit catalytic converter\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMagnaFlow states that it backs its products with a lifetime warranty.\u003c\/p\u003e","brand":"MagnaFlow","offers":[{"title":"Default Title","offer_id":68306286313657,"sku":"MAG6561472","price":1438.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/6561472.jpg?v=1794436196","url":"https:\/\/engmustangs.com\/products\/magnaflow-california-direct-fit-catalytic-converter-2015-2017-mustang-6561472","provider":"ENG Mustangs","version":"1.0","type":"link"}