{"product_id":"magnaflow-axle-back-exhaust-kit-3-competition-series-stainless-steel-with-4-5-polished-tips-2015-2017-s550-mustang-gt-2024-s650-mustang-gt-non-active-19103","title":"MagnaFlow Axle-Back Exhaust Kit 3\" Competition Series Stainless Steel With 4.5\" Polished Tips (2015-2017 S550 Mustang GT \/ 2024 S650 Mustang GT Non Active) - 19103","description":"\u003cp\u003eThe MagnaFlow 19103 is a Competition Series axle-back exhaust kit for non-active-exhaust Mustang GT models. It is built entirely from stainless steel and uses mandrel-bent 3 inch tubing, a pair of 5 inch by 14 inch mufflers, and 4-1\/2 inch polished exhaust tips. It replaces the factory system from the axle rearward and gives the Coyote V8 a deeper, more assertive voice than the stock setup.\u003c\/p\u003e\n\u003cp\u003eThe kit is aimed at GT owners who find the factory exhaust note too subdued and want a stronger V8 rumble without replacing the whole system. MagnaFlow states that the kit has been dyno tested and shows gains in both horsepower and torque. Because the construction is stainless steel throughout, the system should hold its appearance over time. The included hardware and instructions keep the install manageable for enthusiasts who do their own work, although the factory piping must be cut before the new components bolt in.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMagnaFlow Competition Series axle-back exhaust kit, part number 19103\u003c\/li\u003e\n\u003cli\u003eFull stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 3 inch tubing\u003c\/li\u003e\n\u003cli\u003eTwo 5 inch by 14 inch mufflers\u003c\/li\u003e\n\u003cli\u003e4-1\/2 inch polished exhaust tips\u003c\/li\u003e\n\u003cli\u003eDyno tested by the manufacturer, which reports gains in horsepower and torque\u003c\/li\u003e\n\u003cli\u003eDesigned for non-active-exhaust Mustang GT applications in Fastback and Convertible body styles\u003c\/li\u003e\n\u003cli\u003eHardware and installation instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFull Stainless Steel Construction with Mandrel-Bent 3 Inch Tubing\u003c\/h3\u003e\u003cp\u003eMagnaFlow builds this Competition Series axle-back entirely from stainless steel, as it does with all of its exhaust systems. Stainless steel helps the system keep its finish and appearance for years after installation.\u003c\/p\u003e\u003cp\u003eThe 3 inch tubing is mandrel bent. This process forms each bend without crimping or narrowing the pipe, so the tubing keeps a consistent diameter through every curve. The system ends in a pair of 5 inch by 14 inch mufflers that carry 4-1\/2 inch polished tips.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe kit is tuned to deliver what MagnaFlow calls its signature V8 muscle car rumble. It is intended for owners who feel the factory exhaust note is too restrained for a V8 GT.\u003c\/p\u003e\u003cp\u003eMagnaFlow reports that the system was dyno tested and produced gains in both horsepower and torque. The manufacturer does not publish specific figures in the product information.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation requires cutting the factory exhaust piping.\u003c\/li\u003e\n\u003cli\u003eAfter the factory system has been modified, the new axle-back installs with a bolt-in procedure.\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware and instructions are included with the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives the V8 a fuller rumble than the factory exhaust\u003c\/li\u003e\n\u003cli\u003eFull stainless steel construction helps the system keep its appearance over time\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 3 inch tubing keeps the pipe diameter consistent through the bends\u003c\/li\u003e\n\u003cli\u003eDyno tested by MagnaFlow, which reports horsepower and torque gains\u003c\/li\u003e\n\u003cli\u003e4-1\/2 inch polished tips give the rear of the car a clean, finished look\u003c\/li\u003e\n\u003cli\u003eHardware and instructions are included, so the install can be done at home once the factory pipe is cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMandrel-bent 3 inch stainless steel tubing\u003c\/li\u003e\n\u003cli\u003eTwo 5 inch by 14 inch mufflers\u003c\/li\u003e\n\u003cli\u003e4-1\/2 inch polished exhaust tips\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagnaFlow","offers":[{"title":"Default Title","offer_id":68306283135161,"sku":"MAG19103","price":1120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/19103.jpg?v=1794436191","url":"https:\/\/engmustangs.com\/products\/magnaflow-axle-back-exhaust-kit-3-competition-series-stainless-steel-with-4-5-polished-tips-2015-2017-s550-mustang-gt-2024-s650-mustang-gt-non-active-19103","provider":"ENG Mustangs","version":"1.0","type":"link"}