{"product_id":"lth-2-75-cat-back-exhaust-system-stainless-steel-w-4-titan-black-tips-fdcb00002lp","title":"LTH 2.75\" Cat-Back Exhaust System – Stainless Steel w\/ 4\" Titan Black Tips (FDCB00002LP)","description":"\u003cp\u003eThe LTH Headers FDCB00002LP is a 2.75-inch cat-back exhaust system built from T304 stainless steel and finished with dual 4-inch Titan Black powder-coated stainless tips. It replaces the factory rear exhaust section on non-active-exhaust Mustang GT models. LTH designed it to deliver a deeper, more aggressive Coyote V8 tone than stock while, according to the manufacturer, avoiding cabin drone during everyday driving.\u003c\/p\u003e\n\u003cp\u003eThe system uses mandrel-bent tubing to reduce back pressure and improve exhaust velocity compared with the factory setup. It is a fixed-fit design that lines up with the OEM hanger locations, so it bolts in without cutting, welding, or tuning. For owners of S550 and S650 GTs without the active exhaust option who want more sound, a cleaner rear-end look that suits a blacked-out build, and stainless construction intended for long-term street use, this system is a practical bolt-on upgrade.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.75-inch mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eDual 4-inch tips in a Titan Black powder-coated stainless finish\u003c\/li\u003e\n\u003cli\u003eManufacturer states a deep, aggressive tone without cabin drone\u003c\/li\u003e\n\u003cli\u003eMandrel bends reduce back pressure and improve throttle response, per LTH\u003c\/li\u003e\n\u003cli\u003eDescribed by the manufacturer as slightly lighter than the factory system due to a more efficient design\u003c\/li\u003e\n\u003cli\u003eFixed-fit layout that aligns with OEM hanger locations\u003c\/li\u003e\n\u003cli\u003eMounts to factory mounting points with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration required\u003c\/li\u003e\n\u003cli\u003eNo additional components required, per the manufacturer\u003c\/li\u003e\n\u003cli\u003eManufacturer part number FDCB00002LP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction with Titan Black Tips\u003c\/h3\u003e\u003cp\u003eLTH builds this cat-back from T304 stainless steel, chosen for durability that holds up over years of use. The 2.75-inch tubing is mandrel bent, which keeps the pipe diameter consistent through each bend instead of crimping it, helping maintain flow from the front of the system to the tips.\u003c\/p\u003e\u003cp\u003eThe dual 4-inch tips are also stainless steel, coated in a Titan Black powder-coat finish. The result is a stealthy, understated appearance at the rear bumper that works well on cars with a blackout styling theme. Because the system is a fixed-fit design matched to the OEM hanger locations, it is intended to hang in the correct position without adjustment.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCompared to the factory exhaust, this system is designed to provide a louder, deeper Coyote tone along with improved exhaust velocity. LTH states that the mandrel-bent piping reduces back pressure and sharpens throttle response, and that the tone remains clean without becoming tiresome inside the cabin.\u003c\/p\u003e\u003cp\u003eThe manufacturer also notes the system is slightly lighter than the stock exhaust thanks to its more efficient design. It is aimed at street-driven Mustangs, offering a stronger exhaust note without turning the car into a track-only build.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on design using the factory mounting points\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration needed\u003c\/li\u003e\n\u003cli\u003eNo modules, harnesses, or half shafts required\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended by the manufacturer for the best fit and finish, particularly for tip alignment\u003c\/li\u003e\n\u003cli\u003eNot compatible with active exhaust models; confirm your trim before ordering\u003c\/li\u003e\n\u003cli\u003eAccording to LTH, pairing this system with headers or mid-pipes from other brands calls for custom fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a deeper, more aggressive V8 tone than the restrictive factory exhaust\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.75-inch tubing reduces back pressure for improved exhaust flow\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction for long-term durability\u003c\/li\u003e\n\u003cli\u003eTitan Black 4-inch tips provide a subtle, blacked-out rear appearance\u003c\/li\u003e\n\u003cli\u003eBolts to factory mounts with no cutting, welding, or tuning\u003c\/li\u003e\n\u003cli\u003ePairs with LTH headers for owners planning a complete exhaust build\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with active exhaust models—double-check your trim before buying\u003c\/li\u003e\u003c\/ul\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68305436606649,"sku":"LTH-FDCB00002LP","price":1388.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/FDCB00002B-01_4ebd3432-1673-4bbb-993c-c758fd1821de.jpg?v=1794430357","url":"https:\/\/engmustangs.com\/products\/lth-2-75-cat-back-exhaust-system-stainless-steel-w-4-titan-black-tips-fdcb00002lp","provider":"ENG Mustangs","version":"1.0","type":"link"}