{"product_id":"lth-2-5-stainless-steel-muffler-delete-axleback-system-with-polished-tips-2015-2026-mustang-gt-non-active-fdmd00001p","title":"LTH 2.5\" Stainless Steel Muffler Delete Axleback System with Polished Tips (2015-2026 Mustang GT - Non Active) - FDMD00001P","description":"\u003cp\u003eThe LTH Headers FDMD00001P is a 2.5-inch stainless steel muffler delete axle-back system finished with polished tips. It replaces the factory axle-back section on S550 and later 5.0L Mustang GT models that are not equipped with the active exhaust system. By removing the mufflers from the rear of the exhaust, it gives the Coyote V8 a more direct path out of the car than the factory hardware allows.\u003c\/p\u003e\n\u003cp\u003eLTH Headers developed this system around a common issue with OEM exhaust parts. They are often designed for low manufacturing cost and driver comfort rather than performance, and the manufacturer considers the factory 5.0L Mustang GT setup restrictive. The system uses a modular design that works with OEM components, is tuned for a balance of low-end and top-end power, and is manufactured in-house in the USA. For owners who want a louder, less restrictive rear exhaust on a non-active Mustang GT, it is a direct way to get there.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMuffler delete axle-back configuration\u003c\/li\u003e\n\u003cli\u003e2.5-inch stainless steel tubing\u003c\/li\u003e\n\u003cli\u003ePolished exhaust tips\u003c\/li\u003e\n\u003cli\u003eTitan finish intended for added durability\u003c\/li\u003e\n\u003cli\u003eModular design compatible with OEM exhaust components\u003c\/li\u003e\n\u003cli\u003eDeveloped for a balance of low-end and top-end power\u003c\/li\u003e\n\u003cli\u003ePrecision designed for accurate fitment\u003c\/li\u003e\n\u003cli\u003eManufactured in-house in the USA\u003c\/li\u003e\n\u003cli\u003eIntended for Mustang GT models without active exhaust\u003c\/li\u003e\n\u003cli\u003eManufacturer part number FDMD00001P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction, Made in the USA\u003c\/h3\u003e\u003cp\u003eThe system is built from stainless steel with 2.5-inch tubing and is finished with polished tips at the exit. LTH Headers also applies its Titan finish, which the manufacturer says adds durability.\u003c\/p\u003e\u003cp\u003eLTH Headers designs and manufactures the system in-house in the USA. The manufacturer states that it is precision designed for proper fitment on the Mustang GT.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe factory 5.0L Mustang GT exhaust prioritizes cost and comfort, and the manufacturer describes it as restrictive. Removing the mufflers from the axle-back section eliminates part of that restriction at the rear of the car.\u003c\/p\u003e\u003cp\u003eLTH Headers says the system was developed to balance low-end and top-end power. It does not publish specific horsepower or torque figures. Because the design is modular, it can be used with the factory exhaust components still in place, so the rest of the system can be upgraded later if you choose.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory axle-back on non-active 5.0L Mustang GT models, which the manufacturer considers restrictive.\u003c\/li\u003e\n\u003cli\u003eThe muffler delete layout removes the rear mufflers for a less restrictive exhaust exit.\u003c\/li\u003e\n\u003cli\u003eStainless steel construction with a durability-focused Titan finish.\u003c\/li\u003e\n\u003cli\u003eThe modular design works with OEM components, so you can keep the rest of the factory exhaust or upgrade it in stages.\u003c\/li\u003e\n\u003cli\u003eMade in-house in the USA by LTH Headers and backed by a lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from LTH Headers.\u003c\/p\u003e","brand":"LTH Headers","offers":[{"title":"Default Title","offer_id":68305435492537,"sku":"LTH-FDMD00001P","price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/FDMD00001P-01_8179b481-fb7f-460f-a5a7-c25f96b3394e.jpg?v=1794430356","url":"https:\/\/engmustangs.com\/products\/lth-2-5-stainless-steel-muffler-delete-axleback-system-with-polished-tips-2015-2026-mustang-gt-non-active-fdmd00001p","provider":"ENG Mustangs","version":"1.0","type":"link"}